Determine SAS host identifiers - Linux
Suggest changes
- PDF of this doc site
Collection of separate PDF docs
Creating your file...
This may take a few minutes. Thanks for your patience.
Your file is ready
For the SAS protocol, you find the SAS addresses using the HBA utility, then use the HBA BIOS to make the appropriate configuration settings.
Before you begin this procedure, review these guidelines for HBA utilities:
-
Most HBA vendors offer an HBA utility. Depending on your host operating system and CPU, use either the LSI-sas2flash(6G) or sas3flash(12G) utility.
Steps
-
Download the HBA utility from your HBA vendor's web site.
-
Install the utility.
-
Use the HBA BIOS to select the appropriate settings for your configuration.
See the Notes column of the NetApp Interoperability Matrix Tool for recommendations.