FC worksheet for Linux

You can use this worksheet to record FC storage configuration information. You need this information to perform provisioning tasks.

The illustration shows a host connected to an E-Series storage array in two zones. One zone is indicated by the blue line; the other zone is indicated by the red line. Any single port has two paths to the storage (one to each controller).

Host identifiers

Callout No. Host (initiator) port connections WWPN
1 Host not applicable
2 Host port 0 to FC switch zone 0  
7 Host port 1 to FC switch zone 1  

Target identifiers

Callout No. Array controller (target) port connections WWPN
3 Switch not applicable
6 Array controller (target) not applicable
5 Controller A, port 1 to FC switch 1  
9 Controller A, port 2 to FC switch 2  
4 Controller B, port 1 to FC switch 1  
8 Controller B, port 2 to FC switch 2  

Mapping host

Mapping host name  
Host OS type