Skip to main content
E-Series Systems

Verify the VMware configuration is supported

Contributors NetAppZacharyWambold netapp-jolieg

To ensure reliable operation, you create an implementation plan and then use the NetApp Interoperability Matrix Tool (IMT) to verify that the entire configuration is supported.

Steps
  1. Go to the NetApp Interoperability Matrix Tool.

  2. Click the Solution Search tile.

  3. In the Protocols  SAN Host area, click the Add button next to E-Series SAN Host.

  4. Click View Refine Search Criteria.

    The Refine Search Criteria section is displayed. In this section you may select the protocol that applies, as well as other criteria for the configuration such as Operating System, NetApp OS, and Host Multipath driver. Select the criteria you know you want for your configuration, and then see what compatible configuration elements apply. As necessary, make the updates for your operating system and protocol that are prescribed in the tool. Detailed information for your chosen configuration is accessible on the View Supported Configurations page by clicking the right page arrow.

  5. As necessary, make the updates for your operating system and protocol as listed in the table.

    Operating system updates Protocol Protocol-related updates
    • You might need to install out-of-box drivers to ensure proper functionality and supportability. You can install HBA drivers using the ESXi shell or a remote SSH connection to the ESXi host. To access the host using either of those methods, you must enable the ESXi shell and SSH access. For more information about the ESXi shell, refer to the VMware Knowledge Base regarding using the ESXi shell in ESXi. For installation commands, refer to the instructions that accompany the HBA drivers.

    • Each HBA vendor has specific methods for updating boot code and firmware. Some of these methods could include the use of a vCenter plugin or the installation of CIM provider on the ESXi host. vCenter plugins can be used to obtain information about the vendor's specific HBA. Refer to the support section of the vendor's website to obtain the instructions and software necessary to update the HBA boot code or firmware. Refer to the VMware Compatibility Guide or the HBA vendor's website to obtain the correct boot code or firmware.

    FC

    Host bus adapter (HBA) driver, firmware, and bootcode

    iSCSI

    Network interface card (NIC) driver, firmware and bootcode

    SAS

    Host bus adapter (HBA) driver, firmware, and bootcode