FC worksheet for VMware

You can use this worksheet to record FC storage configuration information. You need this information to perform provisioning tasks.

The illustration shows a host connected to an E-Series storage array in two zones. One zone is indicated by the blue line; the other zone is indicated by the red line. Each zone contains one initiator port and all target ports.

Host identifiers

Callout No. Host (initiator) port connections WWPN
1 Host not applicable
2 Host port 0 to FC switch zone 0  
7 Host port 1 to FC switch zone 1  

Target identifiers

Callout No. Array controller (target) port connections WWPN
3 Switch not applicable
6 Array controller (target) not applicable
5 Controller A, port 1 to FC switch 1  
9 Controller A, port 2 to FC switch 2  
4 Controller B, port 1 to FC switch 1  
8 Controller B, port 2 to FC switch 2  

Mapping host

Mapping host name  
Host OS type