Determine the host ports WWPNs - NVMe/FC VMware

To configure FC zoning, you must determine the worldwide port name (WWPN) of each initiator port.

Procedure

  1. Connect to the ESXi host using SSH or the ESXi shell.
  2. Run the following command:
    esxcfg-scsidevs –a
  3. Record the initiator identifiers. The output will be similar to this example:
    vmhba3 lpfc link-up  fc.20000090fa05e848:10000090fa05e848 (0000:03:00.0)
    Emulex Corporation Emulex LPe16000 16Gb PCIe Fibre Channel Adapter
    vmhba4 lpfc link-up  fc.20000090fa05e849:10000090fa05e849 (0000:03:00.1)
    Emulex Corporation Emulex LPe16000 16Gb PCIe Fibre Channel Adapter