Configure SNMP MIB variables

For SNMP alerts, you can optionally configure Management Information Base (MIB) variables that appear in SNMP traps. These variables can return the storage array name, array location, and a contact person.

Before you begin

The MIB file must be copied and compiled on the server with the SNMP service application.

If you do not have a MIB file, you can obtain it as follows:

About this task

This task describes how to define MIB variables for SNMP traps. These variables can return the following values in response to SNMP GetRequests:
  • sysName (name for the storage array)
  • sysLocation (location of the storage array)
  • sysContact (name of an administrator)

Procedure

  1. Select Settings > Alerts.
  2. Select the SNMP tab.
  3. Select Configure SNMP MIB Variables.
    The Configure SNMP MIB Variables dialog box opens.
  4. Enter one or more of the following values, and then click Save.
    • Name – The value for the MIB variable sysName. For example, enter a name for the storage array.
    • Location – The value for the MIB variable sysLocation. For example, enter a location of the storage array.
    • Contact – The value for the MIB variable sysContact. For example, enter an administrator responsible for the storage array.

Result

These values appear in SNMP trap messages for storage array alerts.