Configure NVMe over RoCE ports

If your controller includes a connection for NVMe over RoCE (RDMA over Converged Ethernet), you can configure the NVMe port settings from the System page.

Before you begin

Procedure

  1. Select Settings > System.
  2. Under NVMe over ROCE settings, select Configure NVMe over ROCE ports.
  3. Select the controller with the NVMe over RoCE port you want to configure. Click Next.
  4. Select the HIC port you want to configure from the drop-down list. Click Next.
  5. Configure the port settings.
    To see all port settings, click the Show more port settings link on the right of the dialog box.
    If you selected Enable IPv4, a dialog box opens for selecting IPv4 settings after you click Next. If you selected Enable IPv6, a dialog box opens for selecting IPv6 settings after you click Next. If you selected both options, the dialog box for IPv4 settings opens first, and then after you click Next, the dialog box for IPv6 settings opens.
  6. Configure the IPv4 and/or IPv6 settings, either automatically or manually.
  7. Click Finish.