If your controller includes an iSER over InfiniBand port, you can configure the network connection to the host.
Before you begin
- Your controller must include an iSER over InfiniBand port; otherwise, the iSER over InfiniBand settings are not available in System Manager.
- You must know the IP address of the host connection.
Procedure
- Select Hardware.
- If the graphic shows the drives, click Show back of shelf.
The graphic changes to show the controllers instead of the drives.
- Click the controller with the iSER over InfiniBand port you want to configure.
The controller's context menu appears.
- Select Configure iSER over InfiniBand ports.
The Configure iSER over InfiniBand Ports dialog box opens.
- In the drop-down list, select the HIC port you want to configure, and then enter the IP address of the host.
- Click Configure.
- Complete the configuration, and then reset the iSER over InfiniBand port by clicking Yes.