Configure the iSCSI ports

You must configure the iSCSI ports to ensure communication between the target (local E-Series storage array) and source (remote storage array) arrays.

The iSCSI ports can be configured multiple ways based on your subnet. The following are a few examples on how to configure the iSCSI ports for use with the Remote Storage Volumes feature.

Table 1. A ports and B ports use different subnets
Source A Source B Target A Target B
10.10.1.100/22 10.10.2.100/22 10.10.1.101/22 10.10.2.101/22
Table 2. A ports and B ports use the same subnet
Source A Source B Target A Target B
10.10.0.100/16 10.10.0.100/16 10.10.0.101/16 10.10.0.101/16