Discover single array

Use the Discover Single Storage Array option to manually discover and add a single storage array to your organization's network.

1. From the Manage page, select Discover.

   The Discover storage arrays dialog box appears.

2. Select the Discover a single storage array radio button.
3. Enter the IP address for one of the controllers in the storage array, and then click Start Discovery.

   It can take several minutes for SANtricity Unified Manager to connect to the specified storage array.

   Note: The Storage Array Not Accessible message appears when the connection to the IP address of the specified controller is unsuccessful.
4. If prompted, resolve any self-signed certificates.

   As part of the discovery process, the system verifies that the discovered storage arrays are using certificates by a trusted source. If it cannot locate a digital certificate for a storage array, it prompts you to resolve the certificate that is not signed by a recognized certificate authority (CA) by adding a security exception.

5. If prompted, resolve any untrusted certificates.

   Untrusted certificates occur when a storage array attempts to establish a secure connection to SANtricity Unified Manager, but the connection fails to confirm as secure. Resolve untrusted certificates by importing a certificate authority (CA) certificate that has been issued by a trusted third party.

6. Click Next.
7. (Optional) Associate the discovered storage array to a group: From the drop-down list, select the desired group to associate with the storage array.
   The "All" group is selected by default.
8. Enter the administrator password for the storage array that you want to add to your management domain, and then click OK.