La version française est une traduction automatique. La version anglaise prévaut sur la française en cas de divergence.
Installez le package d'installation de ONTAP Mediator
Contributeurs
Suggérer des modifications
PDF
Pour installer ONTAP Mediator, vous devez obtenir le package d'installation et exécuter le programme d'installation sur l'hôte.
|
Pour mettre à niveau une installation ONTAP Mediator existante, consultez plutôt "Mettre à niveau ONTAP Mediator". |
À propos de cette tâche
-
À partir d'ONTAP 9.19.1 et ONTAP Mediator 1.12, vous avez la possibilité d'installer ONTAP Mediator avec la prise en charge d'iSCSI et d'HTTPS, ou uniquement avec la prise en charge d'HTTPS. Si vous choisissez d'installer ONTAP Mediator avec la prise en charge d'HTTPS uniquement, le package SCST n'est pas installé.
-
Si vous effectuez une mise à niveau depuis ONTAP Mediator 1.11 ou une version antérieure avec SCST installé, et que vous choisissez l'option HTTPS uniquement lors de la mise à niveau, le package SCST est désinstallé et la nouvelle version d'ONTAP Mediator ne contient pas le package SCST.
-
Si vous prévoyez d'utiliser ONTAP Mediator pour surveiller plusieurs configurations IP MetroCluster, la prise en charge dépend de votre type de Mediator, de la version d'ONTAP et du système d'exploitation. Consultez "Utilisez ONTAP Mediator pour surveiller plusieurs configurations IP MetroCluster" pour plus d'informations.
-
L'installation ONTAP Mediator avec prise en charge du protocole HTTPS uniquement est prise en charge pour les cas d'utilisation suivants :
-
Vous prévoyez d'utiliser uniquement ONTAP Mediator pour surveiller vos clusters de synchronisation active SnapMirror.
-
Vous prévoyez de configurer ONTAP Mediator avec HTTPS pour surveiller une ou plusieurs configurations IP MetroCluster.
-
-
ONTAP Mediator doit être installé avec la prise en charge d'iSCSI et de HTTPS dans le scénario suivant :
-
Vous prévoyez de configurer ONTAP Mediator avec iSCSI pour surveiller une ou plusieurs configurations IP MetroCluster.
-
-
Lors de l'installation ou de la mise à niveau vers ONTAP Mediator 1.12 ou une version ultérieure, le programme d'installation vous invite à répondre aux éléments suivants :
ONTAP Mediator can be installed with iSCSI and HTTPS support, or HTTPS support only. Do you wish to install ONTAP Mediator with iSCSI and HTTPS support? Y(es)/n(o):-
Répondez
Yessi vous prévoyez d'utiliser ONTAP Mediator configuré avec iSCSI pour surveiller une ou plusieurs configurations IP MetroCluster. -
Répondez
Nosi vous prévoyez d'utiliser ONTAP Mediator uniquement pour la synchronisation active SnapMirror, ou si vous prévoyez de configurer ONTAP Mediator avec HTTPS pour surveiller une ou plusieurs configurations IP MetroCluster.Vous pouvez également utiliser l’ `--https-only`option dans la `./ontap-mediator-1.12.1/ontap-mediator-1.12.1`commande pour spécifier uniquement HTTPS.
-
-
Pour les cas d'utilisation d'automatisation, vous pouvez utiliser la commande
./ontap-mediator-1.12.1/ontap-mediator-1.12.1 -ypour ignorer les invites de l'installateur.
Étapes
-
Exécutez le programme d'installation et répondez aux invites comme demandé :
./ontap-mediator-1.12.1/ontap-mediator-1.12.1[root@mediator_host ~]# ./ontap-mediator-1.12.1/ontap-mediator-1.12.1
Pour ignorer la vérification de signature lors de l'installation, utilisez la
./ontap-mediator-1.12.1/ontap-mediator-1.12.1 --skip-code-signature-checkcommandeLe programme d'installation crée les comptes requis et installe les packages nécessaires. Si ONTAP Mediator est déjà installé, le programme d'installation vous invite plutôt à le mettre à niveau ; pour les étapes et exemples spécifiques à la mise à niveau, consultez "Mettre à niveau ONTAP Mediator".
Exemple d'installation d'ONTAP Mediator avec prise en charge HTTPS et iSCSI (sortie console)
[root@mediator_host ~]# tar -zxvf ontap-mediator-1.12.1.tgz ontap-mediator-1.12.1/ ontap-mediator-1.12.1/csc-prod-chain-ONTAP-Mediator.pem ontap-mediator-1.12.1/ONTAP-Mediator-production.pub ontap-mediator-1.12.1/tsa-prod-ONTAP-Mediator.pem ontap-mediator-1.12.1/csc-prod-ONTAP-Mediator.pem ontap-mediator-1.12.1/tsa-prod-chain-ONTAP-Mediator.pem ontap-mediator-1.12.1/ontap-mediator-1.12.1 ontap-mediator-1.12.1/ontap-mediator-1.12.1.sig ontap-mediator-1.12.1/ontap-mediator-1.12.1.tsr ontap-mediator-1.12.1/ontap-mediator-1.12.1.sig.tsr [root@mediator_host ~]# ontap-mediator-1.12.1/ontap-mediator-1.12.1 ONTAP Mediator: Self Extracting Installer + Extracting the ONTAP Mediator installation/upgrade archive + Performing the ONTAP Mediator run-time code signature check Using openssl from the path: /usr/bin/openssl configured for CApath:/etc/pki/tls + Unpacking the ONTAP Mediator installer + ONTAP_MEDIATOR_INSTALL_HTTPS_ONLY is set to '0', args are: '' + Starting ONTAP Mediator install/update process: previous installation_mode is '' ONTAP Mediator can be installed with iSCSI and HTTPS support, or support for HTTPS only. Do you wish to install ONTAP Mediator with iSCSI and HTTPS support? Y(es)/n(o): yes ONTAP Mediator will be installed with mode: ISCSI_HTTPS + Selected install package mode: ISCSI_HTTPS + Checking that required ports 3260 and 31784 are free ONTAP Mediator requires two user accounts. One for the service (netapp), and one for use by ONTAP to the mediator API (mediatoradmin). Would you like to use the default account names: netapp + mediatoradmin? (Y(es)/n(o)): yes Enter ONTAP Mediator user account (mediatoradmin) password: Re-Enter ONTAP Mediator user account (mediatoradmin) password: + Checking if SELinux is in enforcing mode SELinux is set to Enforcing. ONTAP Mediator server requires modifying the SELinux context of the file /opt/netapp/lib/ontap_mediator/pyenv/bin/uwsgi from type 'lib_t' to 'bin_t'. This is necessary to start the ONTAP Mediator service while SELinux is set to Enforcing. Allow SELinux context change? Y(es)/n(o): yes The installer will change the SELinux context type of /opt/netapp/lib/ontap_mediator/pyenv/bin/uwsgi from type 'lib_t' to 'bin_t'. + Checking for default Linux firewall + Installing required packages. Last metadata expiration check: 2:16:00 ago on Tue 24 Mar 2026 12:58:28 PM EDT. Package openssl-1:3.5.1-7.0.1.el9_7.x86_64 is already installed. Package openssl-devel-1:3.5.1-7.0.1.el9_7.x86_64 is already installed. Package kernel-uek-devel-6.12.0-109.67.6.el9uek.x86_64 is already installed. Package gcc-11.5.0-11.0.2.el9.x86_64 is already installed. Package make-1:4.3-8.el9.x86_64 is already installed. Package which-2.21-30.el9_6.x86_64 is already installed. Package libselinux-utils-3.6-3.el9.x86_64 is already installed. Package patch-2.7.6-16.el9.x86_64 is already installed. Package perl-Data-Dumper-2.174-462.el9.x86_64 is already installed. Package perl-ExtUtils-MakeMaker-2:7.60-3.el9.noarch is already installed. Package bzip2-1.0.8-10.el9_5.x86_64 is already installed. Package efibootmgr-16-12.0.1.el9.x86_64 is already installed. Package mokutil-2:0.7.2-1.el9.x86_64 is already installed. Package python3-pip-21.3.1-1.el9.noarch is already installed. Package elfutils-libelf-devel-0.193-1.el9.x86_64 is already installed. Package policycoreutils-python-utils-3.6-3.el9.noarch is already installed. Package python3.12-3.12.12-4.0.1.el9_7.1.x86_64 is already installed. Package python3.12-devel-3.12.12-4.0.1.el9_7.1.x86_64 is already installed. Package gcc-toolset-14-14.0-2.el9.x86_64 is already installed. Dependencies resolved. =================================================================================================================================== Package Architecture Version Repository Size =================================================================================================================================== Installing: efibootmgr x86_64 18-8.el10 baseos 47 k mokutil x86_64 2:0.7.2-1.el10 baseos 48 k patch x86_64 2.7.6-26.el10 appstream 131 k perl-ExtUtils-MakeMaker noarch 2:7.70-513.el10 appstream 295 k python3-devel x86_64 3.12.12-4.el10_1 appstream 329 k python3-pip noarch 23.3.2-7.el10 appstream 3.2 M Upgrading: libselinux x86_64 3.9-1.el10 baseos 97 k libselinux-utils x86_64 3.9-1.el10 baseos 122 k libsemanage x86_64 3.9-1.el10 baseos 122 k libsepol x86_64 3.9-1.el10 baseos 348 k policycoreutils x86_64 3.9-1.el10 baseos 224 k policycoreutils-python-utils noarch 3.9-1.el10 appstream 51 k python-unversioned-command noarch 3.12.12-4.el10_1 appstream 11 k python3 x86_64 3.12.12-4.el10_1 baseos 28 k python3-libs x86_64 3.12.12-4.el10_1 baseos 9.4 M python3-libselinux x86_64 3.9-1.el10 appstream 200 k python3-libsemanage x86_64 3.9-1.el10 appstream 81 k python3-policycoreutils noarch 3.9-1.el10 appstream 2.2 M Installing dependencies: annobin-docs noarch 12.99-1.el10 appstream 88 k annobin-plugin-gcc x86_64 12.99-1.el10 appstream 998 k dwz x86_64 0.16-1.el10 appstream 139 k efi-filesystem noarch 6-7.el10.rocky.0.1 baseos 7.8 k efi-srpm-macros noarch 6-7.el10.rocky.0.1 appstream 22 k efivar-libs x86_64 39-3.el10 baseos 127 k fonts-srpm-macros noarch 1:2.0.5-18.el10 appstream 26 k forge-srpm-macros noarch 0.4.0-6.el10 appstream 20 k gcc-plugin-annobin x86_64 14.3.1-2.1.el10 appstream 67 k go-srpm-macros noarch 3.6.0-7.el10_1 appstream 27 k kernel-srpm-macros noarch 1.0-26.el10 appstream 9.4 k lua-srpm-macros noarch 1-15.el10 appstream 8.8 k ocaml-srpm-macros noarch 10-4.el10 appstream 9.2 k openblas-srpm-macros noarch 2-19.el10 appstream 7.7 k package-notes-srpm-macros noarch 0.5-13.el10 appstream 9.2 k perl-AutoSplit noarch 5.74-512.2.el10_0 appstream 21 k perl-Benchmark noarch 1.25-512.2.el10_0 appstream 27 k perl-CPAN-Meta-Requirements noarch 2.143-11.el10 appstream 35 k perl-CPAN-Meta-YAML noarch 0.018-512.el10 appstream 26 k perl-Devel-PPPort x86_64 3.72-512.el10 appstream 219 k perl-ExtUtils-Command noarch 2:7.70-513.el10 appstream 14 k perl-ExtUtils-Constant noarch 0.25-512.2.el10_0 appstream 43 k perl-ExtUtils-Install noarch 2.22-511.el10 appstream 43 k perl-ExtUtils-Manifest noarch 1:1.75-511.el10 appstream 34 k perl-ExtUtils-ParseXS noarch 1:3.51-512.el10 appstream 189 k perl-File-Compare noarch 1.100.800-512.2.el10_0 appstream 13 k perl-File-Copy noarch 2.41-512.2.el10_0 appstream 20 k perl-I18N-Langinfo x86_64 0.24-512.2.el10_0 appstream 25 k perl-JSON-PP noarch 1:4.16-512.el10 appstream 66 k perl-Test-Harness noarch 1:3.48-512.el10 appstream 282 k perl-lib x86_64 0.65-512.2.el10_0 appstream 15 k perl-srpm-macros noarch 1-57.el10 appstream 8.5 k perl-version x86_64 8:0.99.32-4.el10 appstream 63 k pyproject-srpm-macros noarch 1.16.2-1.el10 appstream 14 k python-srpm-macros noarch 3.12-10.el10 appstream 23 k python3-pyparsing noarch 3.1.1-7.el10 baseos 271 k qt6-srpm-macros noarch 6.9.1-1.el10 appstream 9.6 k redhat-rpm-config noarch 293-1.el10.rocky.0.2 appstream 78 k rust-toolset-srpm-macros noarch 1.88.0-1.el10 appstream 12 k systemtap-sdt-devel x86_64 5.3-3b.el10 appstream 69 k systemtap-sdt-dtrace x86_64 5.3-3b.el10 appstream 70 k Installing weak dependencies: perl-CPAN-Meta noarch 2.150010-511.el10 appstream 197 k perl-Encode-Locale noarch 1.05-31.el10 appstream 18 k perl-Time-HiRes x86_64 4:1.9777-511.el10 appstream 58 k perl-devel x86_64 4:5.40.2-512.2.el10_0 appstream 770 k perl-doc noarch 5.40.2-512.2.el10_0 appstream 4.9 M Transaction Summary =================================================================================================================================== Install 52 Packages Upgrade 12 Packages Total download size: 26 M Is this ok [y/N]: y Downloading Packages: (1/64): efi-filesystem-6-7.el10.rocky.0.1.noarch.rpm 206 kB/s | 7.8 kB 00:00 (2/64): efibootmgr-18-8.el10.x86_64.rpm 1.2 MB/s | 47 kB 00:00 (3/64): efivar-libs-39-3.el10.x86_64.rpm 2.8 MB/s | 127 kB 00:00 (4/64): mokutil-0.7.2-1.el10.x86_64.rpm 6.4 MB/s | 48 kB 00:00 (5/64): annobin-docs-12.99-1.el10.noarch.rpm 11 MB/s | 88 kB 00:00 (6/64): python3-pyparsing-3.1.1-7.el10.noarch.rpm 13 MB/s | 271 kB 00:00 (7/64): dwz-0.16-1.el10.x86_64.rpm 12 MB/s | 139 kB 00:00 (8/64): efi-srpm-macros-6-7.el10.rocky.0.1.noarch.rpm 2.7 MB/s | 22 kB 00:00 (9/64): fonts-srpm-macros-2.0.5-18.el10.noarch.rpm 5.1 MB/s | 26 kB 00:00 (10/64): forge-srpm-macros-0.4.0-6.el10.noarch.rpm 4.3 MB/s | 20 kB 00:00 (11/64): gcc-plugin-annobin-14.3.1-2.1.el10.x86_64.rpm 10 MB/s | 67 kB 00:00 (12/64): go-srpm-macros-3.6.0-7.el10_1.noarch.rpm 4.7 MB/s | 27 kB 00:00 (13/64): kernel-srpm-macros-1.0-26.el10.noarch.rpm 2.0 MB/s | 9.4 kB 00:00 (14/64): lua-srpm-macros-1-15.el10.noarch.rpm 2.0 MB/s | 8.8 kB 00:00 (15/64): ocaml-srpm-macros-10-4.el10.noarch.rpm 2.0 MB/s | 9.2 kB 00:00 (16/64): annobin-plugin-gcc-12.99-1.el10.x86_64.rpm 16 MB/s | 998 kB 00:00 (17/64): openblas-srpm-macros-2-19.el10.noarch.rpm 432 kB/s | 7.7 kB 00:00 (18/64): package-notes-srpm-macros-0.5-13.el10.noarch.rpm 519 kB/s | 9.2 kB 00:00 (19/64): perl-AutoSplit-5.74-512.2.el10_0.noarch.rpm 4.5 MB/s | 21 kB 00:00 (20/64): patch-2.7.6-26.el10.x86_64.rpm 14 MB/s | 131 kB 00:00 (21/64): perl-Benchmark-1.25-512.2.el10_0.noarch.rpm 3.5 MB/s | 27 kB 00:00 (22/64): perl-CPAN-Meta-Requirements-2.143-11.el10.noarch.rpm 10 MB/s | 35 kB 00:00 (23/64): perl-CPAN-Meta-YAML-0.018-512.el10.noarch.rpm 5.3 MB/s | 26 kB 00:00 (24/64): perl-CPAN-Meta-2.150010-511.el10.noarch.rpm 12 MB/s | 197 kB 00:00 (25/64): perl-Encode-Locale-1.05-31.el10.noarch.rpm 2.6 MB/s | 18 kB 00:00 (26/64): perl-ExtUtils-Command-7.70-513.el10.noarch.rpm 3.0 MB/s | 14 kB 00:00 (27/64): perl-Devel-PPPort-3.72-512.el10.x86_64.rpm 13 MB/s | 219 kB 00:00 (28/64): perl-ExtUtils-Constant-0.25-512.2.el10_0.noarch.rpm 4.9 MB/s | 43 kB 00:00 (29/64): perl-ExtUtils-Install-2.22-511.el10.noarch.rpm 4.7 MB/s | 43 kB 00:00 (30/64): perl-ExtUtils-Manifest-1.75-511.el10.noarch.rpm 6.2 MB/s | 34 kB 00:00 (31/64): perl-File-Compare-1.100.800-512.2.el10_0.noarch.rpm 4.2 MB/s | 13 kB 00:00 (32/64): perl-ExtUtils-MakeMaker-7.70-513.el10.noarch.rpm 17 MB/s | 295 kB 00:00 (33/64): perl-ExtUtils-ParseXS-3.51-512.el10.noarch.rpm 11 MB/s | 189 kB 00:00 (34/64): perl-File-Copy-2.41-512.2.el10_0.noarch.rpm 1.7 MB/s | 20 kB 00:00 (35/64): perl-I18N-Langinfo-0.24-512.2.el10_0.x86_64.rpm 5.0 MB/s | 25 kB 00:00 (36/64): perl-JSON-PP-4.16-512.el10.noarch.rpm 9.3 MB/s | 66 kB 00:00 (37/64): perl-Time-HiRes-1.9777-511.el10.x86_64.rpm 11 MB/s | 58 kB 00:00 (38/64): perl-Test-Harness-3.48-512.el10.noarch.rpm 13 MB/s | 282 kB 00:00 (39/64): perl-lib-0.65-512.2.el10_0.x86_64.rpm 4.4 MB/s | 15 kB 00:00 (40/64): perl-srpm-macros-1-57.el10.noarch.rpm 2.7 MB/s | 8.5 kB 00:00 (41/64): perl-devel-5.40.2-512.2.el10_0.x86_64.rpm 19 MB/s | 770 kB 00:00 (42/64): perl-version-0.99.32-4.el10.x86_64.rpm 4.3 MB/s | 63 kB 00:00 (43/64): pyproject-srpm-macros-1.16.2-1.el10.noarch.rpm 4.5 MB/s | 14 kB 00:00 (44/64): python-srpm-macros-3.12-10.el10.noarch.rpm 5.1 MB/s | 23 kB 00:00 (45/64): python3-devel-3.12.12-4.el10_1.x86_64.rpm 20 MB/s | 329 kB 00:00 (46/64): qt6-srpm-macros-6.9.1-1.el10.noarch.rpm 3.0 MB/s | 9.6 kB 00:00 (47/64): redhat-rpm-config-293-1.el10.rocky.0.2.noarch.rpm 16 MB/s | 78 kB 00:00 (48/64): rust-toolset-srpm-macros-1.88.0-1.el10.noarch.rpm 3.6 MB/s | 12 kB 00:00 (49/64): systemtap-sdt-devel-5.3-3b.el10.x86_64.rpm 11 MB/s | 69 kB 00:00 (50/64): systemtap-sdt-dtrace-5.3-3b.el10.x86_64.rpm 16 MB/s | 70 kB 00:00 (51/64): libselinux-3.9-1.el10.x86_64.rpm 10 MB/s | 97 kB 00:00 (52/64): libselinux-utils-3.9-1.el10.x86_64.rpm 14 MB/s | 122 kB 00:00 (53/64): libsemanage-3.9-1.el10.x86_64.rpm 13 MB/s | 122 kB 00:00 (54/64): libsepol-3.9-1.el10.x86_64.rpm 18 MB/s | 348 kB 00:00 (55/64): python3-pip-23.3.2-7.el10.noarch.rpm 21 MB/s | 3.2 MB 00:00 (56/64): policycoreutils-3.9-1.el10.x86_64.rpm 4.3 MB/s | 224 kB 00:00 (57/64): python3-3.12.12-4.el10_1.x86_64.rpm 5.7 MB/s | 28 kB 00:00 (58/64): policycoreutils-python-utils-3.9-1.el10.noarch.rpm 6.7 MB/s | 51 kB 00:00 (59/64): perl-doc-5.40.2-512.2.el10_0.noarch.rpm 17 MB/s | 4.9 MB 00:00 (60/64): python-unversioned-command-3.12.12-4.el10_1.noarch.rpm 175 kB/s | 11 kB 00:00 (61/64): python3-libselinux-3.9-1.el10.x86_64.rpm 16 MB/s | 200 kB 00:00 (62/64): python3-libsemanage-3.9-1.el10.x86_64.rpm 7.0 MB/s | 81 kB 00:00 (63/64): python3-policycoreutils-3.9-1.el10.noarch.rpm 28 MB/s | 2.2 MB 00:00 (64/64): python3-libs-3.12.12-4.el10_1.x86_64.rpm 31 MB/s | 9.4 MB 00:00 ----------------------------------------------------------------------------------------------------------------------------------- Total 19 MB/s | 26 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Upgrading : python3-libs-3.12.12-4.el10_1.x86_64 1/76 Upgrading : python-unversioned-command-3.12.12-4.el10_1.noarch 2/76 Upgrading : python3-3.12.12-4.el10_1.x86_64 3/76 Upgrading : libsepol-3.9-1.el10.x86_64 4/76 Upgrading : libselinux-3.9-1.el10.x86_64 5/76 Running scriptlet: libselinux-3.9-1.el10.x86_64 5/76 Installing : perl-version-8:0.99.32-4.el10.x86_64 6/76 Installing : perl-File-Copy-2.41-512.2.el10_0.noarch 7/76 Installing : perl-CPAN-Meta-Requirements-2.143-11.el10.noarch 8/76 Upgrading : libsemanage-3.9-1.el10.x86_64 9/76 Upgrading : python3-libselinux-3.9-1.el10.x86_64 10/76 Installing : perl-Time-HiRes-4:1.9777-511.el10.x86_64 11/76 Installing : perl-JSON-PP-1:4.16-512.el10.noarch 12/76 Installing : perl-File-Compare-1.100.800-512.2.el10_0.noarch 13/76 Installing : perl-ExtUtils-ParseXS-1:3.51-512.el10.noarch 14/76 Installing : efivar-libs-39-3.el10.x86_64 15/76 Upgrading : python3-libsemanage-3.9-1.el10.x86_64 16/76 Installing : perl-ExtUtils-Command-2:7.70-513.el10.noarch 17/76 Installing : perl-ExtUtils-Manifest-1:1.75-511.el10.noarch 18/76 Upgrading : libselinux-utils-3.9-1.el10.x86_64 19/76 Upgrading : policycoreutils-3.9-1.el10.x86_64 20/76 Running scriptlet: policycoreutils-3.9-1.el10.x86_64 20/76 Upgrading : python3-policycoreutils-3.9-1.el10.noarch 21/76 Installing : python3-pyparsing-3.1.1-7.el10.noarch 22/76 Installing : systemtap-sdt-dtrace-5.3-3b.el10.x86_64 23/76 Installing : systemtap-sdt-devel-5.3-3b.el10.x86_64 24/76 Installing : python3-pip-23.3.2-7.el10.noarch 25/76 Installing : rust-toolset-srpm-macros-1.88.0-1.el10.noarch 26/76 Installing : qt6-srpm-macros-6.9.1-1.el10.noarch 27/76 Installing : pyproject-srpm-macros-1.16.2-1.el10.noarch 28/76 Installing : perl-srpm-macros-1-57.el10.noarch 29/76 Installing : perl-lib-0.65-512.2.el10_0.x86_64 30/76 Installing : perl-doc-5.40.2-512.2.el10_0.noarch 31/76 Installing : perl-I18N-Langinfo-0.24-512.2.el10_0.x86_64 32/76 Installing : perl-Encode-Locale-1.05-31.el10.noarch 33/76 Installing : perl-ExtUtils-Constant-0.25-512.2.el10_0.noarch 34/76 Installing : perl-Devel-PPPort-3.72-512.el10.x86_64 35/76 Installing : perl-CPAN-Meta-YAML-0.018-512.el10.noarch 36/76 Installing : perl-CPAN-Meta-2.150010-511.el10.noarch 37/76 Installing : perl-Benchmark-1.25-512.2.el10_0.noarch 38/76 Installing : perl-Test-Harness-1:3.48-512.el10.noarch 39/76 Installing : perl-AutoSplit-5.74-512.2.el10_0.noarch 40/76 Installing : package-notes-srpm-macros-0.5-13.el10.noarch 41/76 Installing : openblas-srpm-macros-2-19.el10.noarch 42/76 Installing : ocaml-srpm-macros-10-4.el10.noarch 43/76 Installing : lua-srpm-macros-1-15.el10.noarch 44/76 Installing : kernel-srpm-macros-1.0-26.el10.noarch 45/76 Installing : gcc-plugin-annobin-14.3.1-2.1.el10.x86_64 46/76 Installing : efi-srpm-macros-6-7.el10.rocky.0.1.noarch 47/76 Installing : dwz-0.16-1.el10.x86_64 48/76 Installing : annobin-docs-12.99-1.el10.noarch 49/76 Installing : annobin-plugin-gcc-12.99-1.el10.x86_64 50/76 Installing : fonts-srpm-macros-1:2.0.5-18.el10.noarch 51/76 Installing : forge-srpm-macros-0.4.0-6.el10.noarch 52/76 Installing : go-srpm-macros-3.6.0-7.el10_1.noarch 53/76 Installing : python-srpm-macros-3.12-10.el10.noarch 54/76 Installing : redhat-rpm-config-293-1.el10.rocky.0.2.noarch 55/76 Running scriptlet: redhat-rpm-config-293-1.el10.rocky.0.2.noarch 55/76 Installing : perl-ExtUtils-Install-2.22-511.el10.noarch 56/76 Installing : perl-devel-4:5.40.2-512.2.el10_0.x86_64 57/76 Installing : perl-ExtUtils-MakeMaker-2:7.70-513.el10.noarch 58/76 Installing : efi-filesystem-6-7.el10.rocky.0.1.noarch 59/76 Installing : efibootmgr-18-8.el10.x86_64 60/76 Installing : python3-devel-3.12.12-4.el10_1.x86_64 61/76 Upgrading : policycoreutils-python-utils-3.9-1.el10.noarch 62/76 Installing : mokutil-2:0.7.2-1.el10.x86_64 63/76 Installing : patch-2.7.6-26.el10.x86_64 64/76 Cleanup : policycoreutils-python-utils-3.8-1.el10.noarch 65/76 Cleanup : python3-policycoreutils-3.8-1.el10.noarch 66/76 Running scriptlet: policycoreutils-3.8-1.el10.x86_64 67/76 Cleanup : policycoreutils-3.8-1.el10.x86_64 67/76 Cleanup : python3-libsemanage-3.8.1-1.el10_0.x86_64 68/76 Cleanup : libsemanage-3.8.1-1.el10_0.x86_64 69/76 Cleanup : python3-libselinux-3.8-2.el10_0.x86_64 70/76 Cleanup : libselinux-utils-3.8-2.el10_0.x86_64 71/76 Cleanup : python3-3.12.9-2.el10_0.2.x86_64 72/76 Cleanup : libselinux-3.8-2.el10_0.x86_64 73/76 Cleanup : python-unversioned-command-3.12.9-2.el10_0.2.noarch 74/76 Cleanup : libsepol-3.8-1.el10.x86_64 75/76 Cleanup : python3-libs-3.12.9-2.el10_0.2.x86_64 76/76 Running scriptlet: python3-libs-3.12.9-2.el10_0.2.x86_64 76/76 Upgraded: libselinux-3.9-1.el10.x86_64 libselinux-utils-3.9-1.el10.x86_64 libsemanage-3.9-1.el10.x86_64 libsepol-3.9-1.el10.x86_64 policycoreutils-3.9-1.el10.x86_64 policycoreutils-python-utils-3.9-1.el10.noarch python-unversioned-command-3.12.12-4.el10_1.noarch python3-3.12.12-4.el10_1.x86_64 python3-libs-3.12.12-4.el10_1.x86_64 python3-libselinux-3.9-1.el10.x86_64 python3-libsemanage-3.9-1.el10.x86_64 python3-policycoreutils-3.9-1.el10.noarch Installed: annobin-docs-12.99-1.el10.noarch annobin-plugin-gcc-12.99-1.el10.x86_64 dwz-0.16-1.el10.x86_64 efi-filesystem-6-7.el10.rocky.0.1.noarch efi-srpm-macros-6-7.el10.rocky.0.1.noarch efibootmgr-18-8.el10.x86_64 efivar-libs-39-3.el10.x86_64 fonts-srpm-macros-1:2.0.5-18.el10.noarch forge-srpm-macros-0.4.0-6.el10.noarch gcc-plugin-annobin-14.3.1-2.1.el10.x86_64 go-srpm-macros-3.6.0-7.el10_1.noarch kernel-srpm-macros-1.0-26.el10.noarch lua-srpm-macros-1-15.el10.noarch mokutil-2:0.7.2-1.el10.x86_64 ocaml-srpm-macros-10-4.el10.noarch openblas-srpm-macros-2-19.el10.noarch package-notes-srpm-macros-0.5-13.el10.noarch patch-2.7.6-26.el10.x86_64 perl-AutoSplit-5.74-512.2.el10_0.noarch perl-Benchmark-1.25-512.2.el10_0.noarch perl-CPAN-Meta-2.150010-511.el10.noarch perl-CPAN-Meta-Requirements-2.143-11.el10.noarch perl-CPAN-Meta-YAML-0.018-512.el10.noarch perl-Devel-PPPort-3.72-512.el10.x86_64 perl-Encode-Locale-1.05-31.el10.noarch perl-ExtUtils-Command-2:7.70-513.el10.noarch perl-ExtUtils-Constant-0.25-512.2.el10_0.noarch perl-ExtUtils-Install-2.22-511.el10.noarch perl-ExtUtils-MakeMaker-2:7.70-513.el10.noarch perl-ExtUtils-Manifest-1:1.75-511.el10.noarch perl-ExtUtils-ParseXS-1:3.51-512.el10.noarch perl-File-Compare-1.100.800-512.2.el10_0.noarch perl-File-Copy-2.41-512.2.el10_0.noarch perl-I18N-Langinfo-0.24-512.2.el10_0.x86_64 perl-JSON-PP-1:4.16-512.el10.noarch perl-Test-Harness-1:3.48-512.el10.noarch perl-Time-HiRes-4:1.9777-511.el10.x86_64 perl-devel-4:5.40.2-512.2.el10_0.x86_64 perl-doc-5.40.2-512.2.el10_0.noarch perl-lib-0.65-512.2.el10_0.x86_64 perl-srpm-macros-1-57.el10.noarch perl-version-8:0.99.32-4.el10.x86_64 pyproject-srpm-macros-1.16.2-1.el10.noarch python-srpm-macros-3.12-10.el10.noarch python3-devel-3.12.12-4.el10_1.x86_64 python3-pip-23.3.2-7.el10.noarch python3-pyparsing-3.1.1-7.el10.noarch qt6-srpm-macros-6.9.1-1.el10.noarch redhat-rpm-config-293-1.el10.rocky.0.2.noarch rust-toolset-srpm-macros-1.88.0-1.el10.noarch systemtap-sdt-devel-5.3-3b.el10.x86_64 systemtap-sdt-dtrace-5.3-3b.el10.x86_64 Complete! OS package installations finished OS package installations finished + Installing ONTAP Mediator. (Log: /root/ontap_mediator.pJBcIv/ontap-mediator-1.12.1/ontap-mediator-1.12.1/install_20260324151410.log) This step will take several minutes. Use the log file to view progress. Sudoer config verified ONTAP Mediator rsyslog and logging rotation enabled + Install successful. (Moving log to /opt/netapp/lib/ontap_mediator/log/install_20260324151410.log) + WARNING: This system supports UEFI Secure Boot (SB) is currently disabled on this system. If SB is enabled in the future, SCST will not work unless the following action is taken: Using the keys in /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys follow instructions in /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/README.module-signing to sign the SCST kernel module. Note that reboot will be needed. SCST will not start automatically when Secure Boot is enabled and not configured properly. + Note: ONTAP Mediator generated a self-signed server certificate for temporary use on this host. If the DNS name or IP address for the host is changed, the certificate will no longer be valid. The default certificates should be replaced with secure trusted certificates signed by a known certificate authority prior to use for production. For more information, see /opt/netapp/lib/ontap_mediator/README + Note: ONTAP Mediator uses a kernel module compiled specifically for the current OS. Using 'yum update' to upgrade the kernel might cause service interruption. For more information, see /opt/netapp/lib/ontap_mediator/README [root@mediator_host ~]#Exemple d'installation d'ONTAP Mediator avec prise en charge de HTTPS uniquement (sortie console)
[root@mediator_host ~]# tar -zxvf ontap-mediator-1.12.1.tgz ontap-mediator-1.12.1/ ontap-mediator-1.12.1/csc-prod-chain-ONTAP-Mediator.pem ontap-mediator-1.12.1/tsa-prod-ONTAP-Mediator.pem ontap-mediator-1.12.1/csc-prod-ONTAP-Mediator.pem ontap-mediator-1.12.1/tsa-prod-chain-ONTAP-Mediator.pem ontap-mediator-1.12.1/ONTAP-Mediator-production.pub ontap-mediator-1.12.1/ontap-mediator-1.12.1 ontap-mediator-1.12.1/ontap-mediator-1.12.1.sig ontap-mediator-1.12.1/ontap-mediator-1.12.1.tsr ontap-mediator-1.12.1/ontap-mediator-1.12.1.sig.tsr [root@mediator_host ~]# ontap-mediator-1.12.1/ontap-mediator-1.12.1 --https-only ONTAP Mediator: Self Extracting Installer + Extracting the ONTAP Mediator installation/upgrade archive + Performing the ONTAP Mediator run-time code signature check Using openssl from the path: /usr/bin/openssl configured for CApath:/etc/pki/tls Error querying OCSP responder 40E72F35407F0000:error:1E800080:HTTP routines:OSSL_HTTP_REQ_CTX_nbio:failed reading data:crypto/http/http_client.c:596: 40E72F35407F0000:error:1E800067:HTTP routines:OSSL_HTTP_REQ_CTX_exchange:error receiving:crypto/http/http_client.c:1045:server=http://ocsp.entrust.net:80 WARNING: The OCSP check failed while attempting to test the Code-Signature-Check certificate Continue without code signature checking (only recommended if integrity has been established manually)? y(es)/N(o): yes SKIPPING: Code signature check, manual override due to lack of OCSP response + Unpacking the ONTAP Mediator installer + ONTAP_MEDIATOR_INSTALL_HTTPS_ONLY is set to '1', args are: '' + Starting ONTAP Mediator install/update process: previous installation_mode is '' + Selected install package mode: HTTPS_ONLY + Checking that required port 31784 is free ONTAP Mediator requires two user accounts. One for the service (netapp), and one for use by ONTAP to the mediator API (mediatoradmin). Would you like to use the default account names: netapp + mediatoradmin? (Y(es)/n(o)): yes Enter ONTAP Mediator user account (mediatoradmin) password: Re-Enter ONTAP Mediator user account (mediatoradmin) password: + Checking if SELinux is in enforcing mode + Checking for default Linux firewall + Installing required packages. Last metadata expiration check: 0:38:52 ago on Mon 20 Apr 2026 11:23:22 AM EDT. Package openssl-1:3.5.1-7.el9_7.x86_64 is already installed. Package openssl-devel-1:3.5.1-7.el9_7.x86_64 is already installed. Package gcc-11.5.0-11.el9.x86_64 is already installed. Package make-1:4.3-8.el9.x86_64 is already installed. Package which-2.21-30.el9_6.x86_64 is already installed. Package libselinux-utils-3.6-3.el9.x86_64 is already installed. Package patch-2.7.6-16.el9.x86_64 is already installed. Package perl-Data-Dumper-2.174-462.el9.x86_64 is already installed. Package perl-ExtUtils-MakeMaker-2:7.60-3.el9.noarch is already installed. Package bzip2-1.0.8-10.el9_5.x86_64 is already installed. Package efibootmgr-16-12.el9.x86_64 is already installed. Package mokutil-2:0.7.2-1.el9.x86_64 is already installed. Package python3-pip-21.3.1-1.el9.noarch is already installed. Package elfutils-libelf-devel-0.193-1.el9.x86_64 is already installed. Package policycoreutils-python-utils-3.6-3.el9.noarch is already installed. Package python3.12-3.12.12-4.el9_7.2.x86_64 is already installed. Package python3.12-devel-3.12.12-4.el9_7.2.x86_64 is already installed. Dependencies resolved. Nothing to do. Complete! OS package installations finished + Installing ONTAP Mediator. (Log: /root/ontap_mediator.CJqNqu/ontap-mediator-1.12.1/ontap-mediator-1.12.1/install_20260420120204.log) This step will take several minutes. Use the log file to view progress. Sudoer config verified ONTAP Mediator rsyslog and logging rotation enabled + Install successful. (Moving log to /opt/netapp/lib/ontap_mediator/log/install_20260420120204.log) + Note: ONTAP Mediator generated a self-signed server certificate for temporary use on this host. If the DNS name or IP address for the host is changed, the certificate will no longer be valid. The default certificates should be replaced with secure trusted certificates signed by a known certificate authority prior to use for production. For more information, see /opt/netapp/lib/ontap_mediator/README [root@mediator_host ~]#
Enregistrez la clé de sécurité pour UEFI Secure Boot
À partir de ONTAP Mediator 1.4, le mécanisme de démarrage sécurisé est activé sur les systèmes UEFI. Lorsque le démarrage sécurisé est activé, vous devez prendre des mesures supplémentaires pour enregistrer la clé de sécurité après l'installation.
|
|
Si vous avez installé ONTAP Mediator 1.12 ou une version ultérieure prenant uniquement en charge HTTPS, le package SCST n'est pas installé et vous pouvez ignorer cette tâche. |
Étapes
-
Suivez les instructions du fichier README pour signer le module du noyau SCST :
/opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/README.module-signing -
Localisez les clés requises :
/opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys
Après l'installation, la sortie système affiche les fichiers README et l'emplacement de la clé. -
Ajoutez la clé publique à la liste MOK:
mokutil --import /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/scst_module_key.der
Vous pouvez laisser la clé privée à son emplacement par défaut ou la déplacer vers un emplacement sécurisé. Vous devez conserver la clé publique à son emplacement actuel afin que le Boot Manager puisse l'utiliser. Pour plus d'informations, consultez le fichier README.module-signing :
[root@hostname ~]# ls /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/ README.module-signing scst_module_key.der scst_module_key.priv -
Redémarrez l'hôte et utilisez le gestionnaire de démarrage UEFI de votre appareil pour approuver la nouvelle clé MOK. Vous aurez besoin de la phrase secrète fournie pour l' `mokutil`utilitaire dans "Installez ONTAP Mediator lorsque le démarrage sécurisé UEFI est activé".
Signer les modules du noyau SCST
Une fois ONTAP Mediator installé, si systemctl status mediator-scst affiche failed (inactive), suivez ces étapes pour signer le module de noyau SCST.
|
|
Si vous avez installé ONTAP Mediator 1.12 ou une version ultérieure prenant uniquement en charge HTTPS, le package SCST n'est pas installé et vous pouvez ignorer cette tâche. |
Étapes
-
Lors du processus de compilation, une paire de clés publique/privée est générée dans le
/opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/répertoire. Exécutez la commande suivante pour afficher les clés générées :ls /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/README.module-signing scst_module_key.der scst_module_key.priv
-
Démarrez le processus d'importation de la clé publique dans le référentiel de clés UEFI en exécutant la commande suivante :
mokutil --import /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/scst_module_key.derL' `mokutil`utilitaire vous invite à saisir un mot de passe à deux reprises.
-
Le logiciel mokutil demande un mot de passe temporaire pour cette clé lors du processus d'importation.
-
Vérifiez si le processus d'importation a démarré à l'aide de la commande suivante, puis redémarrez le système. Le chargeur de démarrage lance le gestionnaire EFI MOK.
mokutil --list-new -
Utilisez les menus à l'écran pour activer la clé du module noyau SCST. Après le démarrage, exécutez la commande suivante. Une fois le service lancé, les modules noyau SCST sont signés.
systemctl status mediator-scst
Quelle est la prochaine étape ?