Skip to main content
La version française est une traduction automatique. La version anglaise prévaut sur la française en cas de divergence.

numériser

Contributeurs
PDF

La PME scan La commande analyse de manière récursive l'ensemble du partage SMB et répertorie tous les fichiers à la fin du scan commande.

Syntaxe
xcp scan \\<SMB share path>
Montrer l'exemple 
C:\Users\Administrator\Desktop\xcp>xcp scan \\<IP address or hostname of SMB server>\volxcp
c:\netapp\xcp\xcp scan \\<IP address of SMB destination server>\source_share
volxcp\3333.txt
volxcp\SMB.txt
volxcp\SMB1.txt
volxcp\com.txt
volxcp\commands.txt
volxcp\console.txt
volxcp\linux.txt
volxcp\net use.txt
volxcp\newcom.txt
volxcp\notepad.txt
c:\netapp\xcp\xcp scan \\<IP address of SMB destination server>\source_share
60,345 scanned, 0 matched, 0 errors
Total Time : 8s
STATUS : PASSED
C:\Users\Administrator\Desktop\xcp>Parameters

Le tableau suivant répertorie la scan paramètres et leur description.

Paramètre Description

scan -h, –-help

Affiche des informations détaillées sur l'utilisation de la commande scan.

scan -v

Augmente la verbosité de débogage.

<<smb_scan_parallel,balayage - parallèle et gauche ; n ;

Spécifie le nombre de processus simultanés (par défaut : <cpu-count>).

<<smb_scan_match_filter,balayage - correspondance lt;filtre gt;

Traite uniquement les fichiers et répertoires correspondant au filtre.

<<smb_scan_exclude_filter,scan -exclude lt;filter>

Exclut uniquement les fichiers et les répertoires du filtre.

scan -preserve-atime

Restaure la dernière date d'accès à la source.

<<smb_scan_depth,balayage - profondeur lt;n>

Limite la profondeur de recherche à n niveaux.

scannez -stats

Répertorie les fichiers au format de rapport statistique de l'arborescence.

scan -html

Répertorie les fichiers au format de rapport HTML des statistiques de l'arborescence.

scan -csv

Répertorie les fichiers au format de rapport CSV statistique de l'arborescence.

balayage -l

Répertorie les fichiers au format de sortie de la liste longue.

propriété d'acquisition

Récupère les informations de propriété des fichiers et des répertoires sur la source
système.

scan -du

Récapitule l'utilisation de l'espace de chaque répertoire, y compris les sous-répertoires.

<<smb_scan_fmt,scan -fmt lt;expression>

Formate la liste des fichiers en fonction de l'expression Python (voir xcp help -fmt pour plus de détails).

scannez -ads

Analyse récursivement l'ensemble du partage SMB et répertorie tous les fichiers et tous les autres flux de données associés.

scan -h, –-help

Utilisez le -h et –-help paramètres avec le scan pour afficher des informations détaillées sur l'utilisation de la commande scan.

Syntaxe
xcp scan --help
Montrer l'exemple 
C:\netapp\xcp>xcp scan --help

usage: xcp scan [-h] [-v] [-parallel <n>] [-match <filter>] [-exclude <filter>] [-preserve-atime] [-depth
<n>] [-loglevel <name>] [-stats] [-l] [-ownership] [-du]
                [-fmt <expression>] [-html] [-csv] [-edupe] [-bs <n>] [-ads]
                source
positional arguments:
   source
optional arguments:
   -h, --help           show this help message and exit
   -v                   increase debug verbosity
   -parallel <n>        number of concurrent processes (default: <cpu-count>)
   -match <filter>      only process files and directories that match the filter (see `xcp help -match` for     details)
   -exclude <filter>    Exclude files and directories that match the filter (see `xcp help -exclude` for details)
   -preserve-atime      restore last accessed date on source
   -depth <n>           limit the search depth
   -loglevel <name>     option to set log level filter (default:INFO)
   -stats               print tree statistics report
   -l                   detailed file listing output
   -ownership           retrieve ownership information
   -du                  summarize space usage of each directory including subdirectories
   -fmt <expression>    format file listing according to the python expression (see `xcp help -fmt` for details)
   -html                Save HTML statistics report
   -csv                 Save CSV statistics report
   -edupe               Include dedupe and sparse data estimate in reports (see documentation for details)
   -bs <n>              read/write block size for scans which read data with -edupe (default: 64k)
   -ads                 scan NTFS alternate data stream

scan -v

Utilisez le -v paramètre avec le scan pour fournir des informations de journalisation détaillées permettant de dépanner ou de déboguer lorsqu'une erreur ou un avertissement est signalé.

Syntaxe
xcp scan -v \\<IP address or hostname of SMB server>\source_share
Montrer l'exemple 
c:\netapp\xcp>xcp scan -v \\<IP address or hostname of SMB server>\source_share
xcp scan -v \\<IP address or hostname of SMB server>\source_share
---Truncated output----
source_share\ASUP.pm
source_share\ASUP_REST.pm
source_share\Allflavors_v2.pm
source_share\Armadillo.pm
source_share\AsupExtractor.pm
source_share\BTS_Config.pm
source_share\Backup.pm
source_share\Aggregate.pm
source_share\Burt.pm
source_share\CConfig.pm
source_share\CIFS.pm
source_share\CR.pm
source_share\CRC.pm
source_share\CSHM.pm
source_share\CSM.pm
source_share\agnostic\SFXOD.pm
source_share\agnostic\Snapmirror.pm
source_share\agnostic\VolEfficiency.pm
source_share\agnostic\flatfile.txt
source_share\agnostic
source_share
xcp scan \\<IP address or hostname of SMB server>\source_share
317 scanned, 0 matched, 0 errors
Total Time : 0s
STATUS : PASSED

scan - <n> parallèle

Utilisez le -parallel <n> paramètre avec le scan Commande permettant de définir un nombre plus élevé ou inférieur de processus simultanés XCP.

Remarque La valeur maximale pour n est 61.
Syntaxe
xcp scan -parallel <n> \\<IP address or hostname of SMB server>\source_share
Montrer l'exemple 
c:\netapp\xcp>xcp scan -parallel 8 \\<IP address or hostname of SMB server>\cifs_share
xcp scan -parallel 8 \\<IP address or hostname of SMB server>\cifs_share

cifs_share\ASUP.pm
cifs_share\ASUP_REST.pm
cifs_share\Allflavors_v2.pm
cifs_share\Armadillo.pm
cifs_share\AsupExtractor.pm
cifs_share\BTS_Config.pm
cifs_share\Backup.pm
cifs_share\Aggregate.pm
cifs_share\agnostic\CifsAccess.pm
cifs_share\agnostic\DU_Cmode.pm
cifs_share\agnostic\Flexclone.pm
cifs_share\agnostic\HyA_Clone_Utils.pm
cifs_share\agnostic\Fileclone.pm
cifs_share\agnostic\Jobs.pm
cifs_share\agnostic\License.pm
cifs_share\agnostic\Panamax_Clone_Utils.pm
cifs_share\agnostic\LunCmds.pm
cifs_share\agnostic\ProtocolAccess.pm
cifs_share\agnostic\Qtree.pm
cifs_share\agnostic\Quota.pm
cifs_share\agnostic\RbacCmdFetcher.pm
cifs_share\agnostic\RbacCmdFetcher_ReadMe
cifs_share\agnostic\SFXOD.pm
cifs_share\agnostic\Snapmirror.pm
cifs_share\agnostic\VolEfficiency.pm
cifs_share\agnostic\flatfile.txt
cifs_share\agnostic
cifs_share
xcp scan -parallel 8 \\<IP address or hostname of SMB server>\cifs_share
317 scanned, 0 matched, 0 errors
Total Time : 0s
STATUS : PASSED

scan -match <filter>

Utilisez le -match <filter> paramètre avec le scan pour traiter uniquement les fichiers et répertoires correspondant au filtre.

Syntaxe
xcp scan -match <filter> \\<IP address or hostname of SMB server>\source_share

Dans l'exemple suivant : scan -match analyse tous les fichiers modifiés entre un mois et un an et imprime une ligne sur la console pour chaque fichier trouvé. Le format ISO de son heure de dernière modification, une taille lisible par l'utilisateur du fichier, son type et son chemin relatif sont renvoyés pour chaque fichier.

Montrer l'exemple 
c:\netapp\xcp>xcp scan -match "1*month < modified < 1*year" -fmt "'{:>15} {:>7}{}
{}'.format(iso(mtime), humanize_size(size), type, relpath)" \\<IP address or hostname of SMB server>\source_share
xcp scan -match "1*month < modified < 1*year" -fmt "'{:>15} {:>7} {} {}'.format(iso(mtime), humanize_size(size), type, relpath)" \\<IP address or hostname of SMB server>\source_share

xcp scan -match 1*month < modified < 1*year -fmt '{:>15} {:>7} {} {}'.format(iso(mtime), humanize_size(size), type, relpath) \\<IP address or hostname of SMB server>\source_share
317 scanned, 0 matched, 0 errors
Total Time : 0s
STATUS : PASSED

Dans l'exemple suivant : scan -match Répertorie les fichiers qui n'ont pas été modifiés depuis plus de 3 mois et dont la taille est supérieure à 4 Mo.

Montrer l'exemple 
c:\netapp\xcp>xcp scan -match "modified > 3*month and size > 4194304" -fmt "'{},{},
{}'.format(iso(mtime), humanize_size(size), relpath)" \\<IP address or hostname of SMB
server>\source_share
xcp scan -match "modified > 3*month and size > 4194304" -fmt "'{}, {}, {}'.format(iso(mtime), humanize_size(size), relpath)" \\<IP address or hostname of SMB server>\source_share

xcp scan -match modified > 3*month and size > 4194304 -fmt '{}, {}, {}'.format(iso(mtime), humanize_size(size), relpath) \\<IP address or hostname of SMB server>\source_share
317 scanned, 0 matched, 0 errors
Total Time : 0s
STATUS : PASSED

Le premier des deux exemples suivants correspond uniquement aux répertoires et le formatage ajoute une virgule entre les variables "mtime", "chemin relatif" et "profondeur".

Le deuxième exemple redirige la même sortie vers « name.csv ».

Montrer l'exemple 
c:\netapp\xcp>xcp scan -match "type is directory" -fmt "','.join(map(str, [iso(mtime), relpath, depth]))" \\<IP address or hostname of SMB server>\source_share
xcp scan -match "type is directory" -fmt "','.join(map(str, [iso(mtime), relpath, depth]))" \\<IP address or hostname of SMB server>\source_share

2013-03-07_15:41:40.376072,source_share\agnostic,1
2020-03-05_04:15:07.769268,source_share,0

xcp scan -match type is directory -fmt ','.join(map(str, [iso(mtime), relpath, depth])) \\<IP address or hostname of SMB server>\source_share
317 scanned, 2 matched, 0 errors
Total Time : 0s
STATUS : PASSED
Montrer l'exemple 
c:\netapp\xcp>xcp scan -match "type is directory" -fmt "','.join(map(str, [iso(mtime), relpath, depth]))" \\<IP address or hostname of SMB server>\source_share > name.csv
xcp scan -match "type is directory" -fmt "','.join(map(str, [iso(mtime), relpath, depth]))" \\<IP address or hostname of SMB server>\source_share > name.csv

L'exemple suivant imprime le chemin complet et le brut mtime valeur de tous les fichiers qui ne sont pas des répertoires. Le mtime la valeur est complétée de 70 caractères pour faciliter la lecture d'un rapport de console.

Montrer l'exemple 
c:\netapp\xcp>xcp scan -match "type is not directory" -fmt "'{}{:>70}'.format(abspath, mtime)" \\<IP address or hostname of SMB server>\source_share
xcp scan -match "type is not directory" -fmt "'{} {:>70}'.format(abspath, mtime)" \\<IP address or hostname of SMB server>\source_share

--truncated output--
\\<IP address or hostname of SMB server>\source_share\ASUP.pm
1362688899.238098
\\<IP address or hostname of SMB server>\source_share\ASUP_REST.pm
1362688899.264073
\\<IP address or hostname of SMB server>\source_share\Allflavors_v2.pm
1362688899.394938
\\<IP address or hostname of SMB server>\source_share\Armadillo.pm
1362688899.402936
\\<IP address or hostname of SMB server>\source_share\AsupExtractor.pm
1362688899.410922
\\<IP address or hostname of SMB server>\source_share\BTS_Config.pm
1362688899.443902
\\<IP address or hostname of SMB server>\source_share\Backup.pm
1362688899.444905
\\<IP address or hostname of SMB server>\source_share\Aggregate.pm
1362688899.322019
\\<IP address or hostname of SMB server>\source_share\Burt.pm
1362688899.446889
\\<IP address or hostname of SMB server>\source_share\CConfig.pm
1362688899.4479
\\<IP address or hostname of SMB server>\source_share\CIFS.pm
1362688899.562795
\\<IP address or hostname of SMB server>\source_share\agnostic\ProtocolAccess.pm
1362688900.358093
\\<IP address or hostname of SMB server>\source_share\agnostic\Qtree.pm
1362688900.359095
\\<IP address or hostname of SMB server>\source_share\agnostic\Quota.pm
1362688900.360094
\\<IP address or hostname of SMB server>\source_share\agnostic\RbacCmdFetcher.pm
1362688900.3611
\\<IP address or hostname of SMB server>\source_share\agnostic\RbacCmdFetcher_ReadMe
1362688900.362094
\\<IP address or hostname of SMB server>\source_share\agnostic\SFXOD.pm
1362688900.363094
\\<IP address or hostname of SMB server>\source_share\agnostic\Snapmirror.pm
1362688900.364092
\\<IP address or hostname of SMB server>\source_share\agnostic\VolEfficiency.pm
1362688900.375077
\\<IP address or hostname of SMB server>\source_share\agnostic\flatfile.txt
1362688900.376076

xcp scan -match type is not directory -fmt '{} {:>70}'.format(abspath, mtime) \\<IP address or hostname of SMB server>\source_share
317 scanned, 315 matched, 0 errors
Total Time : 0s
STATUS : PASSED

scan -exclude <filter>

Utilisez le -exclude <filter> avec le scan commande permettant d'exclure des répertoires et des fichiers en fonction du modèle dans le filtre.

Syntaxe
xcp scan -exclude <filter> \\<IP address or hostname of SMB server>\source_share

Dans l'exemple suivant : scan -exclude exclut tout fichier modifié entre un mois et un an et imprime une ligne sur la console pour chaque fichier non exclu. Les détails imprimés pour chaque fichier sont le format ISO de son heure de dernière modification, une taille lisible par l'homme du fichier, son type et son chemin relatif.

Montrer l'exemple 
c:\netapp\xcp>xcp scan -exclude "1*month < modified < 1*year" -fmt "'{:>15} {:>7}{}
{}'.format(iso(mtime), humanize_size(size), type, relpath)" \\<IP address or hostname ofSMB server>\localtest\arch\win32\agnostic
xcp scan -exclude "1*month < modified < 1*year" -fmt "'{:>15} {:>7} {}{}'.format(iso(mtime), humanize_size(size), type, relpath)" \\<IP address or hostname of SMB server>\localtest\arch\win32\agnostic
2013-03-07_15:39:22.852698 46 regular agnostic\P4ENV
2013-03-07_15:40:27.093887 8.40KiB regular agnostic\Client_outage.thpl
2013-03-07_15:40:38.381870 23.0KiB regular agnostic\IPv6_RA_Configuration_Of_LLA_In_SK_BSD.thpl
2013-03-07_15:40:38.382876 12.0KiB regular agnostic\IPv6_RA_Default_Route_changes.thpl
2013-03-07_15:40:38.383870 25.8KiB regular agnostic\IPv6_RA_Port_Role_Change.thpl
2013-03-07_15:40:38.385863 28.6KiB regular
agnostic\IPv6_RA_processing_And_Default_Route_Installation.thpl
2013-03-07_15:40:38.386865 21.8KiB regular agnostic\IPv6_RA_processing_large_No_Prefix.thpl
2013-03-07_15:40:40.323163          225 regular agnostic\Makefile
2013-03-07_15:40:40.324160          165 regular agnostic\Makefile.template
----truncated output ----
2013-03-07_15:45:36.668516            0 directory agnostic\tools\limits_finder\vendor\symfony\src
2013-03-07_15:45:36.668514            0 directory agnostic\tools\limits_finder\vendor\symfony
2013-03-07_15:45:40.782881            0 directory agnostic\tools\limits_finder\vendor
2013-03-07_15:45:40.992685            0 directory agnostic\tools\limits_finder
2013-03-07_15:45:53.242817            0 directory agnostic\tools
2013-03-07_15:46:11.334815            0 directory agnostic

xcp scan -exclude 1*month < modified < 1*year -fmt '{:>15} {:>7} {} {}'.format(iso(mtime), humanize_size(size), type, relpath) \\<IP address or hostname of SMB server>\localtest\arch\win32\agnostic
140,856 scanned, 1 excluded, 0 errors
Total Time : 46s
STATUS : PASSED

Dans l'exemple suivant : scan -exclude Répertorie les fichiers non exclus qui n'ont pas été modifiés depuis plus de trois mois et dont la taille est supérieure à 5.5 Ko. Les détails imprimés pour chaque fichier sont le format ISO de son heure de dernière modification, une taille lisible par l'utilisateur du fichier, son type et son chemin relatif.

Montrer l'exemple 
c:\netapp\xcp>xcp scan -exclude "modified > 3*month and size > 5650" -fmt "'{}, {}, {}'.format(iso(mtime), humanize_size(size), relpath)" \\<IP address or hostname of SMB server>\localtest\arch\win32\agnostic\snapmirror
xcp scan -exclude "modified > 3*month and size > 5650" -fmt "'{}, {}, {}'.format(iso(mtime), humanize_size(size) relpath)" \\<IP address or hostname of SMB server>\localtest\arch\win32\agnostic\snapmirror

2013-03-07_15:44:53.713279, 4.31KiB, snapmirror\rsm_abort.thpl
2013-03-07_15:44:53.714269, 3.80KiB, snapmirror\rsm_break.thpl
2013-03-07_15:44:53.715270, 3.99KiB, snapmirror\rsm_init.thpl
2013-03-07_15:44:53.716268, 2.41KiB, snapmirror\rsm_quiesce.thpl
2013-03-07_15:44:53.717263, 2.70KiB, snapmirror\rsm_release.thpl
2013-03-07_15:44:53.718260, 4.06KiB, snapmirror\rsm_resume.thpl
2013-03-07_15:44:53.720256, 4.77KiB, snapmirror\rsm_resync.thpl
2013-03-07_15:44:53.721258, 3.83KiB, snapmirror\rsm_update.thpl
2013-03-07_15:44:53.724256, 4.74KiB, snapmirror\sm_quiesce.thpl
2013-03-07_15:44:53.725254, 4.03KiB, snapmirror\sm_resync.thpl
2013-03-07_15:44:53.727249, 4.30KiB, snapmirror\sm_store_complete.thpl
2013-03-07_15:44:53.729250, 0, snapmirror

xcp scan -exclude modified > 3*month and size > 5650 -fmt '{}, {}, {}'.format(iso(mtime), humanize_size(size), relpath) \\<IP address or hostname of SMB server>\localtest\arch\win32\agnostic\snapmirror
18 scanned, 6 excluded, 0 errors Total Time : 0s
STATUS : PASSED

Cet exemple suivant exclut les répertoires. Il répertorie les fichiers non exclus avec formatage qui ajoute une virgule entre les variables mtime, relpath, et depth.

Montrer l'exemple 
c:\netapp\xcp>xcp scan -exclude "type is directory" -fmt "','.join(map(str, [iso(mtime), relpath, depth]))" \\<IP address or hostname of SMB server>\localtest\arch\win32\agnostic\snapmirror
xcp scan -exclude "type is directory" -fmt "','.join(map(str, [iso(mtime), relpath,depth]))"
\\<IP address or hostname of SMBserver>\localtest\arch\win32\agnostic\snapmirror
2013-03-07_15:44:53.712271,snapmirror\SMutils.pm,1
2013-03-07_15:44:53.713279,snapmirror\rsm_abort.pm,1
2013-03-07_15:44:53.714269,snapmirror\rsm_break.pm,1
2013-03-07_15:44:53.715270,snapmirror\rsm_init.thpl,1
2013-03-07_15:44:53.716268,snapmirror\rsm_quiesce.thpl,1
2013-03-07_15:44:53.717263,snapmirror\rsm_release.thpl,1
2013-03-07_15:44:53.718260,snapmirror\rsm_resume.thpl,1
2013-03-07_15:44:53.720256,snapmirror\rsm_resync.thpl,1
2013-03-07_15:44:53.721258,snapmirror\rsm_update.thpl,1
2013-03-07_15:44:53.722261,snapmirror\sm_init.thpl,1
2013-03-07_15:44:53.723257,snapmirror\sm_init_complete.thpl,1
2013-03-07_15:44:53.724256,snapmirror\sm_quiesce.thpl,1
2013-03-07_15:44:53.725254,snapmirror\sm_resync.thpl,1
2013-03-07_15:44:53.726250,snapmirror\sm_retrieve_complete.thpl,1
2013-03-07_15:44:53.727249,snapmirror\sm_store_complete.thpl,1
2013-03-07_15:44:53.728256,snapmirror\sm_update.thpl,1
2013-03-07_15:44:53.729260,snapmirror\sm_update_start.thpl,1

xcp scan -exclude type is directory -fmt ','.join(map(str, [iso(mtime), relpath, depth])) \\<IP address or hostname of SMB server>\localtest\arch\win32\agnostic\snapmirror
18 scanned, 1 excluded, 0 errors
Total Time : 0s
STATUS : PASSED

Cet exemple suivant imprime le chemin complet du fichier et le fichier brut mtimevalue de tous les fichiers qui ne sont pas des répertoires. Le mtimevalue est complété de 70 caractères pour faciliter la lecture d'un rapport de console.

Montrer l'exemple 
c:\netapp\xcp>xcp scan -exclude "type is not directory" -fmt "'{} {:>70}'.format(abspath, mtime)" \\<IP address or hostname of SMBserver>\source_share

xcp scan -exclude type is not directory -fmt '{} {:>70}'.format(abspath, mtime) \\<IP address or hostname of SMB server>\source_share
18 scanned, 17 excluded, 0errors
Total Time : 0s
STATUS : PASSED

scan -preserve-atime

Utilisez le -preserve-atime paramètre avec le scan pour restaurer la dernière date d'accès à tous les fichiers de la source et réinitialiser le atime À la valeur d'origine avant que XCP ne lise le fichier.

Lorsque vous analysez un partage SMB, la durée d'accès est modifiée sur les fichiers (si le système de stockage est configuré pour être modifié) atime En lecture) parce que XCP lit les fichiers un par un. XCP ne change jamais le atime, il lit simplement le fichier, qui déclenche une mise à jour atime.

Syntaxe
xcp scan -preserve-atime \\<IP address or hostname of SMB server>\source_share
Montrer l'exemple 
c:\netapp\xcp>xcp scan -preserve-atime \\<IP address or hostname of SMB server>\source_share
xcp scan -preserve-atime \\<IP address or hostname of SMB server>\source_share

source_share\ASUP.pm
source_share\ASUP_REST.pm
source_share\Allflavors_v2.pm
source_share\Armadillo.pm
source_share\AsupExtractor.pm
source_share\BTS_Config.pm
source_share\Backup.pm
source_share\Aggregate.pm
source_share\Burt.pm
source_share\CConfig.pm
source_share\agnostic\ProtocolAccess.pm
source_share\agnostic\Qtree.pm
source_share\agnostic\Quota.pm
source_share\agnostic\RbacCmdFetcher.pm
source_share\agnostic\RbacCmdFetcher_ReadMe
source_share\agnostic\SFXOD.pm
source_share\agnostic\Snapmirror.pm
source_share\agnostic\VolEfficiency.pm
source_share\agnostic\flatfile.txt
source_share\agnostic
source_share

xcp scan -preserve-atime \\<IP address or hostname of SMBserver>\source_share
317 scanned, 0 matched, 0 errors
Total Time : 1s
STATUS : PASSED

<n> de profondeur d'acquisition

Utilisez le -depth <n> paramètre avec le scan Pour limiter la profondeur de recherche des répertoires dans un partage SMB.

Remarque Le –depth Option spécifie comment Deep XCP peut analyser les fichiers dans les sous-répertoires.
Syntaxe
xcp scan -depth <2> \\<IP address or hostname of SMB server>\source_share
Montrer l'exemple 
c:\netapp\xcp>xcp scan -depth 2 \\<IP address or hostname of SMB server>\source_share
xcp scan -depth 2 \\<IP address or hostname of SMB server>\source_share

source_share\ASUP.pm
source_share\ASUP_REST.pm
source_share\Allflavors_v2.pm
source_share\Armadillo.pm
source_share\AsupExtractor.pm
source_share\BTS_Config.pm
source_share\Backup.pm
source_share\Aggregate.pm
source_share\Burt.pm
source_share\CConfig.pm
source_share\CIFS.pm
source_share\CR.pm
source_share\CRC.pm
source_share\CSHM.pm
source_share\agnostic\Fileclone.pm
source_share\agnostic\Jobs.pm
source_share\agnostic\License.pm
source_share\agnostic\Panamax_Clone_Utils.pm
source_share\agnostic\LunCmds.pm
source_share\agnostic\ProtocolAccess.pm
source_share\agnostic\Qtree.pm
source_share\agnostic\Quota.pm
source_share\agnostic\RbacCmdFetcher.pm
source_share\agnostic\RbacCmdFetcher_ReadMe
source_share\agnostic\SFXOD.pm
source_share\agnostic\Snapmirror.pm
source_share\agnostic\VolEfficiency.pm
source_share\agnostic\flatfile.txt
source_share\agnostic
source_share

xcp scan -depth 2 \\<IP address or hostname of SMB server>\source_share
317 scanned, 0 matched, 0 errors
Total Time : 0s
STATUS : PASSED

scannez -stats

Utilisez le -stats paramètre avec le scan commande permettant de répertorier les fichiers dans un format de rapport de statistiques d'arborescence.

Syntaxe
xcp scan -stats \\<IP address or hostname of SMB server>\source_share
Montrer l'exemple 
C:\netapp\xcp>xcp scan -stats \\<IP address or hostname of SMB server>\cifs_share

== Maximum Values ==
        Size      Depth      Namelen     Dirsize
     88.2MiB          3          108          20

== Average Values ==
        Size      Depth      Namelen    Dirsize
     4.74MiB          2          21            9

== Top File Extensions ==
no extension      .PDF       .exe       .html      .whl     .py      other
   22               2          2           2         2        1        9
  20.0KiB        1.54MiB    88.4MiB     124KiB    1.47MiB  1.62KiB   98.3MiB

== Number of files ==
  empty    <8KiB    8-64KiB    64KiB-1MiB    1-10MiB    10-100MiB    >100MiB
      2       24          2             7          2            3

== Space used ==
  empty    <8KiB    8-64KiB    64KiB-1MiB    1-10MiB    10-100MiB     >100MiB
      0  24.0KiB     124KiB       2.87MiB    2.91MiB       184MiB           0

== Directory entries ==
  empty     1-10     10-100        100-1K     1K-10K         >10K
               4          1
== Depth ==
    0-5     6-10      11-15         16-20     21-100         >100
     45

== Modified ==
>1 year  9-12 months  6-9 months  3-6 months  1-3 months  1-31 days  1-24 hrs  <1
hour     <15 mins       future      <1970       invalid
                                                                   44         1
                                                               190MiB

== Created ==
>1 year  9-12 months  6-9 months  3-6 months  1-3 months  1-31 days  1-24 hrs  <1
hour     <15 mins       future      <1970       invalid
                                                                   45
                                                               190MiB
Total count: 45
Directories: 5
Regular files: 40
Symbolic links:
Junctions:
Special files:
Total space for regular files: 190MiB
Total space for directories: 0
Total space used: 190MiB
Dedupe estimate: N/A
Sparse data: N/A
xcp scan -stats \\<IP address or hostname of SMB server>\cifs_share
45 scanned, 0 matched, 0 errors
Total Time : 0s
STATUS : PASSED

scan -html

Utilisez le -html paramètre avec le scan Commande permettant de répertorier les fichiers dans un rapport de statistiques HTML.

Remarque Les rapports XCP (.csv, .html) sont enregistrés au même emplacement que le binaire XCP. Le nom du fichier est au format <xcp_process_id>_<time_stamp>.html. Lorsque XCP ne peut pas mapper les identificateurs de sécurité (SID) aux noms de propriétaire, il utilise les derniers chiffres après le dernier « – » dans le SID pour représenter le propriétaire. Par exemple, lorsque XCP est incapable de mapper le SID S-1-5-21-1896871423-3211229150-3383017265-4854184 à son propriétaire, il représente le propriétaire en utilisant 4854184.
Syntaxe
xcp scan -stats -html -preserve-atime -ownership \\<IP address or hostname of SMB server>\source_share
Montrer l'exemple 
Z:\scripts\xcp\windows>xcp scan -stats -html -preserve-atime -ownership \\<IP address or hostname of SMB server>\source_share
1,972 scanned, 0 matched, 0 errors, 7s
4,768 scanned, 0 matched, 0 errors,12s
7,963 scanned, 0 matched, 0 errors,17s
10,532 scanned, 0 matched, 0 errors,22s
12,866 scanned, 0 matched, 0 errors,27s
15,770 scanned, 0 matched, 0 errors,32s
17,676 scanned, 0 matched, 0 errors,37s

== Maximum Values ==
     Size      Depth     Namelen     Dirsize
   535KiB         16          33          45

== Average Values ==
     Size      Depth     Namelen     Dirsize
  10.3KiB          7          11           6

== Top File SIDs ==
S-1-5-21-1896871423-3211229150-3383017265-4854184 S-1-5-32-544 S-1-5-21-1896871423-3211229150-3383017265-3403389
     9318       8470           1

== Top Space SIDs ==
S-1-5-21-1896871423-3211229150-3383017265-4854184 S-1-5-32-544 S-1-5-21-1896871423-3211229150-3383017265-3403389
  76.8MiB    69.8MiB           0

== Top File Extensions ==
       py	      .rst	     .html  no	extension	    .txt	    .png	    other
     5418	      3738	      1974	         1197    	630      	336	      1344

== Number of files ==
    empty	     <8KiB	   8-64KiB	   64KiB-1MiB   1-10MiB	 10-100MiB	 >100MiB
      168	     11466	      2709	          294

== Space used ==
    empty     <8KiB      8-64KiB     64KiB-1MiB   1-10MiB  10-100MiB   >100MiB
        0     24.4MiB    55.3MiB        66.9MiB

== Directory entries ==
    empty      1-10       10-100         100-1K    1K-10K       >10K
       42      2690          420

== Depth ==
      0-5	     6-10	       11-15	          16-20	   21-100	      >100
     3832	    12527	        1424	              6

== Modified ==
  >1 year	  >1 month	  1-31 days	     1-24 hrs	  <1 hour	   <15 mins	  future	  invalid
  	11718       2961                                 3110
== Created ==
  >1 year  	>1 month    1-31 days	     1-24 hrs   <1 hour    <15 mins	  future	  invalid
                                              1    	17788
== Accessed ==
  >1 year 	>1 month	  1-31 days	     1-24 hrs	  <1 hour	   <15 mins	  future	  invalid
			                                              14624	       3165

Total count: 17789
Directories: 3152
Regular files: 14637
Symbolic links:
Junctions:
Special files:
Total space for regular files:147MiB
Total space for directories: 0
Total space used: 147MiB
Dedupe estimate: N/A
Sparse data: N/A
xcp scan -stats -html -preserve-atime -ownership \\<IP address or hostname ofSMB
server>\source_share
17,789 scanned, 0 matched, 0errors
Total Time : 39s
STATUS : PASSED

scan -csv

Utilisez le -csv paramètre avec le scan Commande permettant de répertorier les fichiers dans un rapport de statistiques d'arborescence CSV.

Syntaxe
xcp scan -stats -csv -preserve-atime -ownership \\<IP address or hostname of SMB server>\source_share
Montrer l'exemple 
Z:\scripts\xcp\windows>xcp scan -stats -csv -preserve-atime -ownership \\<IP address or hostname of SMB server>\source_share

1,761 scanned, 0 matched, 0 errors, 6s
4,949 scanned, 0 matched, 0 errors,11s
7,500 scanned, 0 matched, 0 errors,16s
10,175 scanned, 0 matched, 0 errors,21s
12,371 scanned, 0 matched, 0 errors,26s
15,330 scanned, 0 matched, 0 errors,31s
17,501 scanned, 0 matched, 0 errors,36s

== Maximum Values ==
    Size      Depth	     Namelen     Dirsize
  535KiB	       16	          33	        45

== Average Values ==
    Size	    Depth	     Namelen	   Dirsize
 10.3KiB	        7	          11	         6

== Top File SIDs ==
S-1-5-21-1896871423-3211229150-3383017265-4854184 S-1-5-32-544 S-1-5-21-1896871423-3211229150- 3383017265-3403389
    9318	     8470	           1

== Top Space SIDs ==
S-1-5-21-1896871423-3211229150-3383017265-4854184 S-1-5-32-544 S-1-5-21-1896871423-3211229150- 3383017265-3403389
 76.8MiB	  69.8MiB	           0

== Top File Extensions ==
	  .py	    .rst	   .html	no extension      .txt       .png	    other
	 5418	    3738	    1974          1197       630        336	     1344

==	Number of files ==
    empty      <8KiB	     8-64KiB    64KiB-1MiB	  1-10MiB	10-100MiB  	>100MiB
	  168	   11466	        2709           294

== Space used ==
   empty	   <8KiB	    8-64KiB    64KiB-1MiB	 1-10MiB	10-100MiB	  >100MiB
      0	     24.4MiB        55.3MiB	      66.9MiB	       0          0         0

== Directory entries ==
	empty	     1-10	  10-100        100-1K    1K-10K       >10K
	   42	     2690	     420

==	Depth ==
	  0-5	     6-10	   11-15	       16-20	  21-100       >100
	 3832	    12527	    1424             6

==	Modified ==
 >1 year	 >1 month   1-31 days	 1-24 hrs  	<1 hour  	<15 mins	future	invalid
	 11718	     2961		             3110

== Created ==
 >1 year	 >1 month   1-31 days	 1-24 hrs  	<1 hour	  <15 mins	future	invalid
                                        17789

== Accessed ==
 >1 year	 >1 month   1-31 days	 1-24 hrs	  <1 hour	  <15 mins	future	invalid
		                                15754	     2035

Total count: 17789
Directories: 3152
Regular files: 14637 Symbolic links:
Junctions:
Special files:
Total space for regular files: 147MiB Total space for directories: 0 Total space used: 147MiB
Dedupe estimate: N/A Sparse data: N/A
xcp scan -stats -csv -preserve-atime -ownership \\<IP address or hostname of SMB server>\source_share
17,789 scanned, 0 matched, 0 errors Total Time : 40s
STATUS : PASSED

balayage -l

Utilisez le -l paramètre avec le scan commande permettant de répertorier les fichiers au format de sortie de la liste longue.

Syntaxe
xcp scan -l \\<IP address or hostname of SMB server>\source_share
Montrer l'exemple 
c:\netapp\xcp>xcp scan -l \\<IP address or hostname of SMB server>\source_share xcp scan -l \\<IP address or hostname of SMB server>\source_share

f   195KiB   7y0d source_share\ASUP.pm
f  34.7KiB   7y0d source_share\ASUP_REST.pm
f  4.11KiB	 7y0d source_share\Allflavors_v2.pm
f  38.1KiB	 7y0d source_share\Armadillo.pm
f  3.83KiB	 7y0d source_share\AsupExtractor.pm
f  70.1KiB	 7y0d source_share\BTS_Config.pm
f  2.65KiB	 7y0d source_share\Backup.pm
f  60.3KiB	 7y0d source_share\Aggregate.pm
f  36.9KiB	 7y0d source_share\Burt.pm
f  8.98KiB	 7y0d source_share\CConfig.pm
f  19.3KiB 	 7y0d source_share\CIFS.pm
f  20.7KiB	 7y0d source_share\CR.pm
f  2.28KiB   7y0d source_share\CRC.pm
f  18.7KiB   7y0d source_share\CSHM.pm
f  43.0KiB   7y0d source_share\CSM.pm
f  19.7KiB	 7y0d source_share\ChangeModel.pm
f  33.3KiB	 7y0d source_share\Checker.pm
f  3.47KiB	 7y0d source_share\Class.pm
f  37.8KiB	 7y0d source_share\Client.pm
f   188KiB   7y0d source_share\agnostic\Flexclone.pm
f  15.9KiB   7y0d source_share\agnostic\HyA_Clone_Utils.pm
f  13.4KiB   7y0d source_share\agnostic\Fileclone.pm
f  41.8KiB   7y0d source_share\agnostic\Jobs.pm
f  24.0KiB   7y0d source_share\agnostic\License.pm
f  34.8KiB   7y0d source_share\agnostic\Panamax_Clone_Utils.pm
f  30.2KiB   7y0d source_share\agnostic\LunCmds.pm
f  40.9KiB   7y0d source_share\agnostic\ProtocolAccess.pm
f  15.7KiB   7y0d source_share\agnostic\Qtree.pm
f  29.3KiB   7y0d source_share\agnostic\Quota.pm
f  13.7KiB   7y0d source_share\agnostic\RbacCmdFetcher.pm
f  5.55KiB   7y0d source_share\agnostic\RbacCmdFetcher_ReadMe
f  3.92KiB   7y0d source_share\agnostic\SFXOD.pm
f  35.8KiB   7y0d source_share\agnostic\Snapmirror.pm
f  40.4KiB   7y0d source_share\agnostic\VolEfficiency.pm
f  6.22KiB   7y0d source_share\agnostic\flatfile.txt
d	     0   7y0d source_share\agnostic
d	     0 19h17m source_share

xcp scan -l \\<IP address or hostname of SMB server>\source_share
317 scanned, 0 matched, 0 errors
Total Time : 0s
STATUS : PASSED

propriété d'acquisition

Utilisez le -ownership paramètre avec le scan pour récupérer les informations de propriété des fichiers.

Remarque Vous pouvez uniquement utiliser -ownership avec le -l, -match, -fmt, ou -stats paramètres.
Syntaxe
xcp scan -l -ownership \\<IP address or hostname of SMB server>\source_share
Montrer l'exemple 
c:\netapp\xcp>xcp scan -l -ownership \\<IP address or hostname of SMB server>\source_share xcp scan -l -ownership \\<IP address or hostname of SMB server>\source_share

f	BUILTIN\Administrators	195KiB	7y0d	source_share\ASUP.pm
f	BUILTIN\Administrators	34.7KiB	7y0d	source_share\ASUP_REST.pm
f	BUILTIN\Administrators	4.11KiB	7y0d	source_share\Allflavors_v2.pm
f	BUILTIN\Administrators	38.1KiB	7y0d	source_share\Armadillo.pm
f	BUILTIN\Administrators	3.83KiB	7y0d	source_share\AsupExtractor.pm
f	BUILTIN\Administrators	70.1KiB	7y0d	source_share\BTS_Config.pm
f	BUILTIN\Administrators	2.65KiB	7y0d	source_share\Backup.pm
f	BUILTIN\Administrators	60.3KiB	7y0d	source_share\Aggregate.pm
f	BUILTIN\Administrators	36.9KiB	7y0d	source_share\Burt.pm
f	BUILTIN\Administrators	8.98KiB	7y0d	source_share\CConfig.pm
f	BUILTIN\Administrators	19.3KiB	7y0d	source_share\CIFS.pm
f	BUILTIN\Administrators	20.7KiB	7y0d	source_share\CR.pm
f	BUILTIN\Administrators	2.28KiB	7y0d	source_share\CRC.pm
f	BUILTIN\Administrators	18.7KiB	7y0d	source_share\CSHM.pm
f	BUILTIN\Administrators	43.0KiB	7y0d	source_share\CSM.pm
f	BUILTIN\Administrators	19.7KiB	7y0d	source_share\ChangeModel.pm
f	BUILTIN\Administrators	33.3KiB	7y0d	source_share\Checker.pm
f	BUILTIN\Administrators	3.47KiB	7y0d	source_share\Class.pm
f	BUILTIN\Administrators	37.8KiB	7y0d	source_share\Client.pm
f	BUILTIN\Administrators	2.44KiB	7y0d	source_share\ClientInfo.pm
f	BUILTIN\Administrators	37.2KiB	7y0d	source_share\ClientMgr.pm
f	BUILTIN\Administrators	17.1KiB	7y0d	source_share\ClientRPC.pm
f	BUILTIN\Administrators	9.21KiB	7y0d	source_share\ClusterAgent.pm
f   BUILTIN\Administrators  15.7KiB 7y0d source_share\agnostic\Qtree.pm
f   BUILTIN\Administrators  29.3KiB 7y0d source_share\agnostic\Quota.pm
f   BUILTIN\Administrators  13.7KiB 7y0d source_share\agnostic\RbacCmdFetcher.pm
f   BUILTIN\Administrators  5.55KiB 7y0d source_share\agnostic\RbacCmdFetcher_ReadMe
f   BUILTIN\Administrators  3.92KiB 7y0d source_share\agnostic\SFXOD.pm
f   BUILTIN\Administrators  35.8KiB 7y0d source_share\agnostic\Snapmirror.pm
f   BUILTIN\Administrators  40.4KiB 7y0d source_share\agnostic\VolEfficiency.pm
f   BUILTIN\Administrators  6.22KiB 7y0d source_share\agnostic\flatfile.txt
d   BUILTIN\Administrators  7y0d source_share\agnostic
d   BUILTIN\Administrators

xcp scan -l -ownership \\<IP address or hostname of SMB server>\source_share
317 scanned, 0 matched, 0 errors Total Time : 1s
STATUS : PASSED

scan -du

Utilisez le -du paramètre avec le scan pour résumer l'utilisation de l'espace de chaque répertoire, y compris les sous-répertoires.

Syntaxe
xcp scan -du \\<IP address or hostname of SMB server>\source_share
Montrer l'exemple 
c:\netapp\xcp>xcp scan -du \\<IP address or hostname of SMB server>\source_share xcp scan -du \\<IP address or hostname of SMB server>\source_share

  569KiB source_share\agnostic
  19.8MiB source_share

xcp scan -du \\<IP address or hostname of SMB server>\source_share
317 scanned, 0 matched, 0 errors
Total Time : 0s
STATUS : PASSED

scan -fmt <expression>

Utilisez le -fmt <expression> paramètre avec le scan commande permettant de formater une liste de fichiers en fonction d'une expression définie.

Syntaxe
xcp scan -fmt "', '.join(map(str, [relpath, name, size, depth]))" \\<IPaddress or hostname of SMB server>\source_share
Montrer l'exemple 
c:\netapp\xcp>xcp scan -fmt "', '.join(map(str, [relpath, name, size, depth]))"	\\<IP address or hostname of SMB server>\source_share
xcp scan -fmt "', '.join(map(str, [relpath, name, size, depth]))"	\\<IP address or hostname of SMB server>\source_share

source_share\ASUP.pm, ASUP.pm, 199239, 1
source_share\ASUP_REST.pm, ASUP_REST.pm, 35506, 1
source_share\Allflavors_v2.pm, Allflavors_v2.pm, 4204, 1
source_share\Armadillo.pm, Armadillo.pm, 39024, 1
source_share\AsupExtractor.pm, AsupExtractor.pm, 3924, 1
source_share\BTS_Config.pm, BTS_Config.pm, 71777, 1
source_share\Backup.pm, Backup.pm, 2714, 1
source_share\Aggregate.pm, Aggregate.pm, 61699, 1
source_share\Burt.pm, Burt.pm, 37780, 1
source_share\CConfig.pm, CConfig.pm, 9195, 1
source_share\CIFS.pm, CIFS.pm, 19779, 1
source_share\CR.pm, CR.pm, 21215, 1
source_share\CRC.pm, CRC.pm, 2337, 1
source_share\agnostic\LunCmds.pm, LunCmds.pm, 30962, 2
source_share\agnostic\ProtocolAccess.pm, ProtocolAccess.pm, 41868, 2
source_share\agnostic\Qtree.pm, Qtree.pm, 16057,2
source_share\agnostic\Quota.pm, Quota.pm, 30018,2
source_share\agnostic\RbacCmdFetcher.pm, RbacCmdFetcher.pm, 14067, 2
source_share\agnostic\RbacCmdFetcher_ReadMe, RbacCmdFetcher_ReadMe, 5685, 2
source_share\agnostic\SFXOD.pm, SFXOD.pm, 4019, 2
source_share\agnostic\Snapmirror.pm, Snapmirror.pm, 36624, 2
source_share\agnostic\VolEfficiency.pm, VolEfficiency.pm, 41344, 2
source_share\agnostic\flatfile.txt, flatfile.txt, 6366, 2
source_share\agnostic, agnostic, 0, 1
source_share, , 0, 0
xcp scan -fmt ', '.join(map(str, [relpath, name, size, depth])) \\<IP address or hostname of SMB server>\source_share
317 scanned, 0 matched, 0 errors
Total Time : 0s
STATUS : PASSED

scannez -ads

Utilisez le -ads marquer le paramètre avec le scan Commande avec pour analyser de manière récursive l'ensemble du partage SMB et répertorier tous les fichiers et tous les autres flux de données associés.

Syntaxe
xcp scan -ads \\<source_ip_address>\source_share\src
Montrer l'exemple 
C:\netapp\xcp>xcp scan -ads \\<source_ip_address>\source_share\src

src\file1.txt:ads1
src\file1.txt:ads_file1.txt_1697037934.4154522.txt
src\file1.txt
src\file2.txt:ads1
src\file2.txt:ads_file2.txt_1697037934.5873265.txt
src\file2.txt
src\test1.txt:ads_test1.txt_1697037934.7435765.txt
src\test1.txt
src\dir1\dfile1.txt:ads1
src\dir1\dfile1.txt:ads_dfile1.txt_1697037934.1185782.txt
src\dir1\dfile1.txt:ads_xcp.exe
src\dir1\dfile1.txt:ads_tar
src\dir1\dfile1.txt:java_exe
src\dir1\dfile1.txt:cmdzip
src\dir1\dfile1.txt:ads1_2GB
src\dir1\dfile1.txt
src\dir1:ads1
src\dir1:ads_dir1_1697038504.087317.txt
src\dir1
src:ads_src_1697038504.7123322.txt
src

xcp scan -ads \\<source_ip_address>\source_share\src
6 scanned, 0 matched, 0 errors, 15 ads scanned
Total Time : 2s
STATUS : PASSED