New home for NetApp HCI documentation!
New home for NetApp HCI documentation
New home for NetApp HCI documentation
Notas de la versión
Link to the 1.8 Release Notes
Link to the 1.7P1 Release Notes
Link to the 1.7 Release Notes
Link to the 1.6P1 Release Notes
Link to the 1.4P2 Release Notes
Enlace a Notas de la versión 1.4
Link to the 1.8 Release Notes
Link to the 1.7P1 Release Notes
Link to the 1.7 Release Notes
Link to the 1.6P1 Release Notes
Link to the 1.4P2 Release Notes
Enlace a Notas de la versión 1.4
Instalar hardware
NetApp HCI H-series rail installation information
Instalar y configurar
Empezar desde aquí: Elegir la experiencia de instalación y configuración
Flujo de trabajo de instalación y configuración de alto nivel
Presentación de instalación y configuración
Guía de instalación y configuración
Preparar la instalación
Instalar el hardware
Configurar HCI de NetApp
NetApp HCI H-series rail installation information
Instalar y configurar
Empezar desde aquí: Elegir la experiencia de instalación y configuración
Flujo de trabajo de instalación y configuración de alto nivel
Presentación de instalación y configuración
Guía de instalación y configuración
Preparar la instalación
Instalar el hardware
Configurar HCI de NetApp
Setting up and using NetApp HCI 1.8
NetApp HCI installation and deployment information
Element Plug-in for vCenter Server information
Management node information
NetApp HCI installation and deployment information
Element Plug-in for vCenter Server information
Management node information
Setting up and using NetApp HCI 1.7P1
Deploying NetApp HCI
NetApp HCI overview
About this guide
Requirements for NetApp HCI deployment
Network and switch requirements
Network ports used by NetApp HCI
Network cable requirements
Network configuration
Required network segments
Network configuration and cabling options
Configuration option A: Two cables for compute nodes
Configuration option B: Six cables for compute nodes
Configuration option C: Six cables for compute nodes with native VLANs
IP address requirements
Configuring LACP for optimal storage performance
Configuring IPMI access for each node
Manually assigning the IPMI port IP address
Changing the default IPMI password for H410C and H410S nodes
Changing the default IPMI password for H610C, H615C, and H610S nodes
DNS and timekeeping requirements
Environmental requirements
Protection Domains
Final preparations
Deploying NetApp HCI
Accessing the NetApp Deployment Engine
Accessing the NetApp Deployment Engine in environments without DHCP
Accessing the NetApp Deployment Engine in environments with DHCP
Manually assigning IP addresses to access the NetApp Deployment Engine
Starting your deployment
VMware vSphere configuration
Configuring a new VMware vSphere environment
Joining an existing VMware vSphere deployment
Configuring credentials
Selecting a network topology
Inventory selection and node compatibility
Selecting inventory
Configuring network settings
Reviewing and deploying the configuration
Post-deployment tasks
Supported networking changes
Keeping VMware vSphere up to date
Installing GPU drivers for GPU-enabled compute nodes
Accessing NetApp Hybrid Cloud Control
Upgrading the entire NetApp HCI installation
Migrating from management node 10.x to version 11.x
Upgrading Element software to version 11.7 on the storage cluster
Determining the Element version on the management node
Using HealthTools to run pre-upgrade health checks
Checking the installed version of HealthTools
Checking the installed version of HealthTools on dark sites
Updating HealthTools
Checking for upgrade readiness
Upgrading Element software
What happens when an upgrade fails
Upgrading Element software at dark sites
Upgrading the management node to version 11.7 from version 11.5
Upgrading the management node to version 11.7 from version 11.3
Upgrading the management node to version 11.7 from version 11.0 or 11.1
Updating management services with NetApp Hybrid Cloud Control
Updating compute node firmware
Updating compute node drivers
Expanding your NetApp HCI installation
Expanding NetApp HCI storage resources
Expanding NetApp HCI compute resources
Expanding NetApp HCI storage and compute resources at the same time
Monitoring your NetApp HCI installation
Powering your NetApp HCI system off or on
Powering off compute resources for a NetApp HCI system
Powering off storage resources for a NetApp HCI system
Powering on storage resources for a NetApp HCI system
Powering on compute resources for a NetApp HCI system
Using VCP to manage NetApp HCI
About this guide
vCenter Plug-in overview
Network port requirements
VMware vSphere prerequisites
Getting started
Installing the NetApp Element Plug-in for vCenter Server
Upgrading the vCenter Plug-in
Upgrading vCenter Server
Installing a management node
Registering the vCenter Plug-in with vCenter
Modifying vCenter properties for an in-house (dark site) HTTP server
Upgrading the management node
Upgrading the management node to version 11.7 from version 11.5
Upgrading the management node to version 11.7 from version 11.3
Upgrading the management node to version 11.7 from version 11.0 or 11.1
Migrating from management node 10.x to version 11.x
Configuring a storage NIC (eth1)
Persistent volumes
Updating the vCenter Plug-in registration for vCSA
Updating the vCenter plug-in registration for Windows vCenter
Updating management services
Updating management services with NetApp Hybrid Cloud Control
Updating management services using mNode API
Accessing the plug-in after installation
How to use the NetApp Element Plug-in for vCenter Server
NetApp Element Configuration Extension Point
NetApp Element Management Extension Point
vCenter Linked Mode
Using object naming best practices when managing multiple clusters
Cluster configuration
Adding a cluster
Viewing cluster details
Cluster details
Individual cluster details
Editing cluster profiles
Removing a cluster profile
Enabling virtual volumes
Enabling encryption at rest
Disabling encryption at rest
Enabling SSH
Disabling SSH
Changing the SSH time limit
Setting protection domain monitoring
Shutting down a cluster
Expanding your NetApp HCI
Management node (mNode) settings
Configuring management node settings for QoSSIOC
Editing management node settings for QoSSIOC
Clearing management node settings for QoSSIOC
Changing the QoSSIOC service password
Viewing QoSSIOC events
QoSSIOC event details
Plug-in product information
Reporting
Reporting overview
Viewing event logs
Event log
Event types
Alerts
Alert error codes
iSCSI sessions
Running tasks
Volume performance
Management
Datastore management
Creating a datastore
Viewing the datastore list
Datastore details
Extending a datastore
Cloning a datastore
Sharing a datastore
Performing VAAI UNMAP
Deleting a datastore
QoSSIOC automation
Enabling QoSSIOC automation
Disabling QoSSIOC integration
Volume management
Creating a volume
Viewing volumes details
Volume details
Individual volume details
Editing a volume
Cloning a volume
Volume backup and restore operations
Volume backup operations
Backing up a volume to an Amazon S3 object store
Backing up a volume to an OpenStack Swift object store
Backing up a volume to a cluster running Element software
Volume restore operations
Restoring a volume from backup on an Amazon S3 object store
Restoring a volume from backup on an OpenStack Swift object store
Restoring a volume from backup on a cluster running Element software
Deleting volumes
Purging volumes
Restoring deleted volumes
Adding volumes to an access group
Removing volumes from an access group
Applying a QoS policy to multiple volumes
Changing the QoS policy association of a volume
User account management
Creating an account
Account details
Editing an account
Deleting an account
Volume access groups
Creating access groups
Volume access group details
Editing access groups
Deleting access groups
Initiators
Creating an initiator
Initiator details
Editing an initiator
Deleting initiators
Adding initiators to a volume access group
QoS policies
Creating a QoS policy
QoS policy details
Editing a QoS policy
Deleting a QoS policy
Data protection
Volume snapshots
Creating a volume snapshot
Volume snapshot details
Editing snapshots
Cloning a volume from a snapshot
Rolling back a volume to a snapshot
Volume snapshot backup operations
Backing up a volume snapshot to an Amazon S3 object store
Backing up a volume snapshot to an OpenStack Swift object store
Backing up a volume snapshot to a cluster running Element software
Deleting a snapshot
Group snapshots
Creating a group snapshot
Group snapshot details
Editing group snapshots
Cloning volumes from a group snapshot
Rolling back volumes to a group snapshot
Deleting a group snapshot
Snapshot schedules
Creating a snapshot schedule
Snapshot schedule details
Editing a snapshot schedule
Copying a snapshot schedule
Deleting a snapshot schedule
Configuring cluster and volume pairing for real-time remote replication
Pairing clusters
Pairing clusters using known credentials
Pairing clusters with a pairing key
Validating the cluster pair connection
Pairing volumes
Pairing volumes using known credentials
Creating target volumes and pairing them with local volumes
Pairing volumes using a pairing key
Assigning a replication source and target to paired volumes
Validating volume replication
Deleting a volume relationship after replication
Managing volume relationships
Pausing replication
Changing the mode of replication
Deleting volume pairs
Deleting a cluster pair
Volume pair details
Volume pairing messages
Volume pairing warnings
Cluster management
Drives
Adding available drives to a cluster
Drive details
Removing a drive
Nodes
NetApp HCI storage nodes
NetApp HCI compute nodes
SolidFire Storage nodes
SolidFire Fibre Channel nodes
Adding a node to a cluster
Node details
Removing nodes from a cluster
Restarting cluster nodes
Shutting down cluster nodes
VLAN management
Creating a VLAN
Virtual network details
Editing a virtual network
Deleting a virtual network
Virtual volumes
Configuring vSphere Virtual Volumes (VVols) functionality
Registering the NetApp Element VASA Provider
Creating a VVol datastore
Viewing virtual volume details
Virtual volume details
Individual virtual volume details
Storage containers
Creating a storage container
Viewing storage container details
Storage container details
Individual storage container details
Deleting a storage container
Protocol endpoints
Viewing protocol endpoint details
Protocol endpoint details
Individual protocol endpoint details
Unregistering the vCenter Plug-in
Removing the vCenter Plug-in
Troubleshooting
Plug-in registration successful but icons do not appear in web client
Error registering plug-in using Registration UI
Error updating plug-in using Registration UI
Keystore error using Registration UI
Error message that NetApp extension cannot be upgraded
Removing plug-in completes successfully but icons remain
Plug-in cannot be unregistered or removed after admin password change
Plug-in management tasks fail or volumes are not accessible to ESXi host
Failure occurs during vCenter Plug-in use on Firefox 59.0.2 browsers
Delete datastore operation fails
Cluster pair cannot connect using a pairing key
Error message for QoSSIOC status
QoSSIOC service shown as available but is unavailable
QoSSIOC is enabled for datastore but unavailable
Using the management node
About this guide
Management node for Element software
Management services for NetApp HCI
Persistent volumes
Network port requirements
Installing a management node
Upgrading the management node
Upgrading the management node to version 11.7 from version 11.5
Upgrading the management node to version 11.7 from version 11.3
Upgrading the management node to version 11.7 from version 11.0 or 11.1
Migrating from management node 10.x to version 11.x
Configuring a storage NIC (eth1)
Recovering a management node
Working with the management node
Accessing the management node
Accessing the management node per-node UI
Accessing the management node REST API UI
Getting authorization to use REST APIs
NetApp HCI system alerts
Management node network settings
Management node cluster settings
Testing the management node settings
Running system utilities from the management node
Enabling remote NetApp Support connections
Enabling Active IQ and HCI monitoring services for NetApp HCI
Adding an asset to the management node
Configuring a proxy server
Getting logs from management services
Verifying management services version
Updating management services with NetApp Hybrid Cloud Control
Updating management services using mNode API
Deploying NetApp HCI
NetApp HCI overview
About this guide
Requirements for NetApp HCI deployment
Network and switch requirements
Network ports used by NetApp HCI
Network cable requirements
Network configuration
Required network segments
Network configuration and cabling options
Configuration option A: Two cables for compute nodes
Configuration option B: Six cables for compute nodes
Configuration option C: Six cables for compute nodes with native VLANs
IP address requirements
Configuring LACP for optimal storage performance
Configuring IPMI access for each node
Manually assigning the IPMI port IP address
Changing the default IPMI password for H410C and H410S nodes
Changing the default IPMI password for H610C, H615C, and H610S nodes
DNS and timekeeping requirements
Environmental requirements
Protection Domains
Final preparations
Deploying NetApp HCI
Accessing the NetApp Deployment Engine
Accessing the NetApp Deployment Engine in environments without DHCP
Accessing the NetApp Deployment Engine in environments with DHCP
Manually assigning IP addresses to access the NetApp Deployment Engine
Starting your deployment
VMware vSphere configuration
Configuring a new VMware vSphere environment
Joining an existing VMware vSphere deployment
Configuring credentials
Selecting a network topology
Inventory selection and node compatibility
Selecting inventory
Configuring network settings
Reviewing and deploying the configuration
Post-deployment tasks
Supported networking changes
Keeping VMware vSphere up to date
Installing GPU drivers for GPU-enabled compute nodes
Accessing NetApp Hybrid Cloud Control
Upgrading the entire NetApp HCI installation
Migrating from management node 10.x to version 11.x
Upgrading Element software to version 11.7 on the storage cluster
Determining the Element version on the management node
Using HealthTools to run pre-upgrade health checks
Checking the installed version of HealthTools
Checking the installed version of HealthTools on dark sites
Updating HealthTools
Checking for upgrade readiness
Upgrading Element software
What happens when an upgrade fails
Upgrading Element software at dark sites
Upgrading the management node to version 11.7 from version 11.5
Upgrading the management node to version 11.7 from version 11.3
Upgrading the management node to version 11.7 from version 11.0 or 11.1
Updating management services with NetApp Hybrid Cloud Control
Updating compute node firmware
Updating compute node drivers
Expanding your NetApp HCI installation
Expanding NetApp HCI storage resources
Expanding NetApp HCI compute resources
Expanding NetApp HCI storage and compute resources at the same time
Monitoring your NetApp HCI installation
Powering your NetApp HCI system off or on
Powering off compute resources for a NetApp HCI system
Powering off storage resources for a NetApp HCI system
Powering on storage resources for a NetApp HCI system
Powering on compute resources for a NetApp HCI system
Using VCP to manage NetApp HCI
About this guide
vCenter Plug-in overview
Network port requirements
VMware vSphere prerequisites
Getting started
Installing the NetApp Element Plug-in for vCenter Server
Upgrading the vCenter Plug-in
Upgrading vCenter Server
Installing a management node
Registering the vCenter Plug-in with vCenter
Modifying vCenter properties for an in-house (dark site) HTTP server
Upgrading the management node
Upgrading the management node to version 11.7 from version 11.5
Upgrading the management node to version 11.7 from version 11.3
Upgrading the management node to version 11.7 from version 11.0 or 11.1
Migrating from management node 10.x to version 11.x
Configuring a storage NIC (eth1)
Persistent volumes
Updating the vCenter Plug-in registration for vCSA
Updating the vCenter plug-in registration for Windows vCenter
Updating management services
Updating management services with NetApp Hybrid Cloud Control
Updating management services using mNode API
Accessing the plug-in after installation
How to use the NetApp Element Plug-in for vCenter Server
NetApp Element Configuration Extension Point
NetApp Element Management Extension Point
vCenter Linked Mode
Using object naming best practices when managing multiple clusters
Cluster configuration
Adding a cluster
Viewing cluster details
Cluster details
Individual cluster details
Editing cluster profiles
Removing a cluster profile
Enabling virtual volumes
Enabling encryption at rest
Disabling encryption at rest
Enabling SSH
Disabling SSH
Changing the SSH time limit
Setting protection domain monitoring
Shutting down a cluster
Expanding your NetApp HCI
Management node (mNode) settings
Configuring management node settings for QoSSIOC
Editing management node settings for QoSSIOC
Clearing management node settings for QoSSIOC
Changing the QoSSIOC service password
Viewing QoSSIOC events
QoSSIOC event details
Plug-in product information
Reporting
Reporting overview
Viewing event logs
Event log
Event types
Alerts
Alert error codes
iSCSI sessions
Running tasks
Volume performance
Management
Datastore management
Creating a datastore
Viewing the datastore list
Datastore details
Extending a datastore
Cloning a datastore
Sharing a datastore
Performing VAAI UNMAP
Deleting a datastore
QoSSIOC automation
Enabling QoSSIOC automation
Disabling QoSSIOC integration
Volume management
Creating a volume
Viewing volumes details
Volume details
Individual volume details
Editing a volume
Cloning a volume
Volume backup and restore operations
Volume backup operations
Backing up a volume to an Amazon S3 object store
Backing up a volume to an OpenStack Swift object store
Backing up a volume to a cluster running Element software
Volume restore operations
Restoring a volume from backup on an Amazon S3 object store
Restoring a volume from backup on an OpenStack Swift object store
Restoring a volume from backup on a cluster running Element software
Deleting volumes
Purging volumes
Restoring deleted volumes
Adding volumes to an access group
Removing volumes from an access group
Applying a QoS policy to multiple volumes
Changing the QoS policy association of a volume
User account management
Creating an account
Account details
Editing an account
Deleting an account
Volume access groups
Creating access groups
Volume access group details
Editing access groups
Deleting access groups
Initiators
Creating an initiator
Initiator details
Editing an initiator
Deleting initiators
Adding initiators to a volume access group
QoS policies
Creating a QoS policy
QoS policy details
Editing a QoS policy
Deleting a QoS policy
Data protection
Volume snapshots
Creating a volume snapshot
Volume snapshot details
Editing snapshots
Cloning a volume from a snapshot
Rolling back a volume to a snapshot
Volume snapshot backup operations
Backing up a volume snapshot to an Amazon S3 object store
Backing up a volume snapshot to an OpenStack Swift object store
Backing up a volume snapshot to a cluster running Element software
Deleting a snapshot
Group snapshots
Creating a group snapshot
Group snapshot details
Editing group snapshots
Cloning volumes from a group snapshot
Rolling back volumes to a group snapshot
Deleting a group snapshot
Snapshot schedules
Creating a snapshot schedule
Snapshot schedule details
Editing a snapshot schedule
Copying a snapshot schedule
Deleting a snapshot schedule
Configuring cluster and volume pairing for real-time remote replication
Pairing clusters
Pairing clusters using known credentials
Pairing clusters with a pairing key
Validating the cluster pair connection
Pairing volumes
Pairing volumes using known credentials
Creating target volumes and pairing them with local volumes
Pairing volumes using a pairing key
Assigning a replication source and target to paired volumes
Validating volume replication
Deleting a volume relationship after replication
Managing volume relationships
Pausing replication
Changing the mode of replication
Deleting volume pairs
Deleting a cluster pair
Volume pair details
Volume pairing messages
Volume pairing warnings
Cluster management
Drives
Adding available drives to a cluster
Drive details
Removing a drive
Nodes
NetApp HCI storage nodes
NetApp HCI compute nodes
SolidFire Storage nodes
SolidFire Fibre Channel nodes
Adding a node to a cluster
Node details
Removing nodes from a cluster
Restarting cluster nodes
Shutting down cluster nodes
VLAN management
Creating a VLAN
Virtual network details
Editing a virtual network
Deleting a virtual network
Virtual volumes
Configuring vSphere Virtual Volumes (VVols) functionality
Registering the NetApp Element VASA Provider
Creating a VVol datastore
Viewing virtual volume details
Virtual volume details
Individual virtual volume details
Storage containers
Creating a storage container
Viewing storage container details
Storage container details
Individual storage container details
Deleting a storage container
Protocol endpoints
Viewing protocol endpoint details
Protocol endpoint details
Individual protocol endpoint details
Unregistering the vCenter Plug-in
Removing the vCenter Plug-in
Troubleshooting
Plug-in registration successful but icons do not appear in web client
Error registering plug-in using Registration UI
Error updating plug-in using Registration UI
Keystore error using Registration UI
Error message that NetApp extension cannot be upgraded
Removing plug-in completes successfully but icons remain
Plug-in cannot be unregistered or removed after admin password change
Plug-in management tasks fail or volumes are not accessible to ESXi host
Failure occurs during vCenter Plug-in use on Firefox 59.0.2 browsers
Delete datastore operation fails
Cluster pair cannot connect using a pairing key
Error message for QoSSIOC status
QoSSIOC service shown as available but is unavailable
QoSSIOC is enabled for datastore but unavailable
Using the management node
About this guide
Management node for Element software
Management services for NetApp HCI
Persistent volumes
Network port requirements
Installing a management node
Upgrading the management node
Upgrading the management node to version 11.7 from version 11.5
Upgrading the management node to version 11.7 from version 11.3
Upgrading the management node to version 11.7 from version 11.0 or 11.1
Migrating from management node 10.x to version 11.x
Configuring a storage NIC (eth1)
Recovering a management node
Working with the management node
Accessing the management node
Accessing the management node per-node UI
Accessing the management node REST API UI
Getting authorization to use REST APIs
NetApp HCI system alerts
Management node network settings
Management node cluster settings
Testing the management node settings
Running system utilities from the management node
Enabling remote NetApp Support connections
Enabling Active IQ and HCI monitoring services for NetApp HCI
Adding an asset to the management node
Configuring a proxy server
Getting logs from management services
Verifying management services version
Updating management services with NetApp Hybrid Cloud Control
Updating management services using mNode API
Setting up and using NetApp HCI 1.7
Deploying NetApp HCI
NetApp HCI overview
About this guide
Requirements for NetApp HCI deployment
Network and switch requirements
Network ports used by NetApp HCI
Network cable requirements
Network configuration
Required network segments
Network configuration and cabling options
Configuration option A: Two cables for compute nodes
Configuration option B: Six cables for compute nodes
Configuration option C: Six cables for compute nodes with native VLANs
IP address requirements
Configuring LACP for optimal storage performance
Configuring the IPMI ports
Changing the default compute node IPMI password
DNS and timekeeping requirements
Environmental requirements
Protection Domains
Final preparations
Deploying NetApp HCI
Accessing the NetApp Deployment Engine
Accessing the NetApp Deployment Engine in environments without DHCP
Accessing the NetApp Deployment Engine in environments with DHCP
Manually assigning IP addresses to access the NetApp Deployment Engine
Starting your deployment
VMware vSphere configuration
Configuring a new VMware vSphere environment
Joining an existing VMware vSphere deployment
Configuring credentials
Selecting a network topology
Inventory selection and node compatibility
Selecting inventory
Configuring network settings
Reviewing and deploying the configuration
Post-deployment tasks
Supported networking changes
Keeping VMware vSphere up to date
Installing GPU drivers for GPU-enabled compute nodes
Accessing NetApp Hybrid Cloud Control
Upgrading the entire NetApp HCI installation
Migrating from management node 10.x to version 11.x
Upgrading Element software to version 11.5 on the storage cluster
Determining the Element version on the management node
Using HealthTools to run pre-upgrade health checks
Checking the installed version of HealthTools
Checking the installed version of HealthTools on dark sites
Updating HealthTools
Checking for upgrade readiness
Upgrading Element software
What happens when an upgrade fails
Upgrading Element software at dark sites
Upgrading the management node to version 11.5 from version 11.3
Upgrading the management node to version 11.5 from version 11.0 or 11.1
Updating management services with NetApp Hybrid Cloud Control
Updating compute node firmware
Updating compute node drivers
Enabling cloud services on NetApp HCI
Requirements before you begin with cloud services
Understanding NetApp Cloud Central and Kubernetes information
Cloud Central accounts
What happens behind the scenes
Types of clusters on NetApp HCI
Kubernetes pods, volumes, and projects
Getting a NetApp Kubernetes Service API token
Enabling cloud services with NetApp Hybrid Cloud Control
Creating Kubernetes clusters
Creating a project within a NetApp Kubernetes Service workspace
Adding applications to your Kubernetes cluster
Expanding your NetApp HCI installation
Expanding NetApp HCI storage resources
Expanding NetApp HCI compute resources
Expanding NetApp HCI storage and compute resources at the same time
Monitoring your NetApp HCI installation
Using VCP to manage NetApp HCI
About this guide
vCenter Plug-in overview
Network port requirements
VMware vSphere prerequisites
Getting started
Installing the NetApp Element Plug-in for vCenter Server
Upgrading the vCenter Plug-in
Upgrading vCenter Server
Installing a management node
Registering the vCenter Plug-in with vCenter
Modifying vCenter properties for an in-house (dark site) HTTP server
Upgrading the management node
Upgrading the management node to version 11.7 from version 11.5
Upgrading the management node to version 11.7 from version 11.3
Upgrading the management node to version 11.7 from version 11.0 or 11.1
Migrating from management node 10.x to version 11.x
Configuring a storage NIC (eth1)
Persistent volumes
Updating the vCenter Plug-in registration for vCSA
Updating the vCenter plug-in registration for Windows vCenter
Updating management services
Updating management services with NetApp Hybrid Cloud Control
Updating management services using mNode API
Accessing the plug-in after installation
How to use the NetApp Element Plug-in for vCenter Server
NetApp Element Configuration Extension Point
NetApp Element Management Extension Point
vCenter Linked Mode
Using object naming best practices when managing multiple clusters
Cluster configuration
Adding a cluster
Viewing cluster details
Cluster details
Individual cluster details
Editing cluster profiles
Removing a cluster profile
Enabling virtual volumes
Enabling encryption at rest
Disabling encryption at rest
Enabling SSH
Disabling SSH
Changing the SSH time limit
Setting protection domain monitoring
Shutting down a cluster
Expanding your NetApp HCI
Management node (mNode) settings
Configuring management node settings for QoSSIOC
Editing management node settings for QoSSIOC
Clearing management node settings for QoSSIOC
Changing the QoSSIOC service password
Viewing QoSSIOC events
QoSSIOC event details
Plug-in product information
Reporting
Reporting overview
Viewing event logs
Event log
Event types
Alerts
Alert error codes
iSCSI sessions
Running tasks
Volume performance
Management
Datastore management
Creating a datastore
Viewing the datastore list
Datastore details
Extending a datastore
Cloning a datastore
Sharing a datastore
Performing VAAI UNMAP
Deleting a datastore
QoSSIOC automation
Enabling QoSSIOC automation
Disabling QoSSIOC integration
Volume management
Creating a volume
Viewing volumes details
Volume details
Individual volume details
Editing a volume
Cloning a volume
Volume backup and restore operations
Volume backup operations
Backing up a volume to an Amazon S3 object store
Backing up a volume to an OpenStack Swift object store
Backing up a volume to a cluster running Element software
Volume restore operations
Restoring a volume from backup on an Amazon S3 object store
Restoring a volume from backup on an OpenStack Swift object store
Restoring a volume from backup on a cluster running Element software
Deleting volumes
Purging volumes
Restoring deleted volumes
Adding volumes to an access group
Removing volumes from an access group
Applying a QoS policy to multiple volumes
Changing the QoS policy association of a volume
User account management
Creating an account
Account details
Editing an account
Deleting an account
Volume access groups
Creating access groups
Volume access group details
Editing access groups
Deleting access groups
Initiators
Creating an initiator
Initiator details
Editing an initiator
Deleting initiators
Adding initiators to a volume access group
QoS policies
Creating a QoS policy
QoS policy details
Editing a QoS policy
Deleting a QoS policy
Data protection
Volume snapshots
Creating a volume snapshot
Volume snapshot details
Editing snapshots
Cloning a volume from a snapshot
Rolling back a volume to a snapshot
Volume snapshot backup operations
Backing up a volume snapshot to an Amazon S3 object store
Backing up a volume snapshot to an OpenStack Swift object store
Backing up a volume snapshot to a cluster running Element software
Deleting a snapshot
Group snapshots
Creating a group snapshot
Group snapshot details
Editing group snapshots
Cloning volumes from a group snapshot
Rolling back volumes to a group snapshot
Deleting a group snapshot
Snapshot schedules
Creating a snapshot schedule
Snapshot schedule details
Editing a snapshot schedule
Copying a snapshot schedule
Deleting a snapshot schedule
Configuring cluster and volume pairing for real-time remote replication
Pairing clusters
Pairing clusters using known credentials
Pairing clusters with a pairing key
Validating the cluster pair connection
Pairing volumes
Pairing volumes using known credentials
Creating target volumes and pairing them with local volumes
Pairing volumes using a pairing key
Assigning a replication source and target to paired volumes
Validating volume replication
Deleting a volume relationship after replication
Managing volume relationships
Pausing replication
Changing the mode of replication
Deleting volume pairs
Deleting a cluster pair
Volume pair details
Volume pairing messages
Volume pairing warnings
Cluster management
Drives
Adding available drives to a cluster
Drive details
Removing a drive
Nodes
NetApp HCI storage nodes
NetApp HCI compute nodes
SolidFire Storage nodes
SolidFire Fibre Channel nodes
Adding a node to a cluster
Node details
Removing nodes from a cluster
Restarting cluster nodes
Shutting down cluster nodes
VLAN management
Creating a VLAN
Virtual network details
Editing a virtual network
Deleting a virtual network
Virtual volumes
Configuring vSphere Virtual Volumes (VVols) functionality
Registering the NetApp Element VASA Provider
Creating a VVol datastore
Viewing virtual volume details
Virtual volume details
Individual virtual volume details
Storage containers
Creating a storage container
Viewing storage container details
Storage container details
Individual storage container details
Deleting a storage container
Protocol endpoints
Viewing protocol endpoint details
Protocol endpoint details
Individual protocol endpoint details
Unregistering the vCenter Plug-in
Removing the vCenter Plug-in
Troubleshooting
Plug-in registration successful but icons do not appear in web client
Error registering plug-in using Registration UI
Error updating plug-in using Registration UI
Keystore error using Registration UI
Error message that NetApp extension cannot be upgraded
Removing plug-in completes successfully but icons remain
Plug-in cannot be unregistered or removed after admin password change
Plug-in management tasks fail or volumes are not accessible to ESXi host
Failure occurs during vCenter Plug-in use on Firefox 59.0.2 browsers
Delete datastore operation fails
Cluster pair cannot connect using a pairing key
Error message for QoSSIOC status
QoSSIOC service shown as available but is unavailable
QoSSIOC is enabled for datastore but unavailable
Using the management node
About this guide
Management node for Element software
Management services for NetApp HCI
Persistent volumes
Network port requirements
Installing a management node
Upgrading the management node
Upgrading the management node to version 11.7 from version 11.5
Upgrading the management node to version 11.7 from version 11.3
Upgrading the management node to version 11.7 from version 11.0 or 11.1
Migrating from management node 10.x to version 11.x
Configuring a storage NIC (eth1)
Recovering a management node
Working with the management node
Accessing the management node
Accessing the management node per-node UI
Accessing the management node REST API UI
Getting authorization to use REST APIs
NetApp HCI system alerts
Management node network settings
Management node cluster settings
Testing the management node settings
Running system utilities from the management node
Enabling remote NetApp Support connections
Enabling Active IQ and HCI monitoring services for NetApp HCI
Adding an asset to the management node
Configuring a proxy server
Getting logs from management services
Verifying management services version
Updating management services with NetApp Hybrid Cloud Control
Updating management services using mNode API
Deploying NetApp HCI
NetApp HCI overview
About this guide
Requirements for NetApp HCI deployment
Network and switch requirements
Network ports used by NetApp HCI
Network cable requirements
Network configuration
Required network segments
Network configuration and cabling options
Configuration option A: Two cables for compute nodes
Configuration option B: Six cables for compute nodes
Configuration option C: Six cables for compute nodes with native VLANs
IP address requirements
Configuring LACP for optimal storage performance
Configuring the IPMI ports
Changing the default compute node IPMI password
DNS and timekeeping requirements
Environmental requirements
Protection Domains
Final preparations
Deploying NetApp HCI
Accessing the NetApp Deployment Engine
Accessing the NetApp Deployment Engine in environments without DHCP
Accessing the NetApp Deployment Engine in environments with DHCP
Manually assigning IP addresses to access the NetApp Deployment Engine
Starting your deployment
VMware vSphere configuration
Configuring a new VMware vSphere environment
Joining an existing VMware vSphere deployment
Configuring credentials
Selecting a network topology
Inventory selection and node compatibility
Selecting inventory
Configuring network settings
Reviewing and deploying the configuration
Post-deployment tasks
Supported networking changes
Keeping VMware vSphere up to date
Installing GPU drivers for GPU-enabled compute nodes
Accessing NetApp Hybrid Cloud Control
Upgrading the entire NetApp HCI installation
Migrating from management node 10.x to version 11.x
Upgrading Element software to version 11.5 on the storage cluster
Determining the Element version on the management node
Using HealthTools to run pre-upgrade health checks
Checking the installed version of HealthTools
Checking the installed version of HealthTools on dark sites
Updating HealthTools
Checking for upgrade readiness
Upgrading Element software
What happens when an upgrade fails
Upgrading Element software at dark sites
Upgrading the management node to version 11.5 from version 11.3
Upgrading the management node to version 11.5 from version 11.0 or 11.1
Updating management services with NetApp Hybrid Cloud Control
Updating compute node firmware
Updating compute node drivers
Enabling cloud services on NetApp HCI
Requirements before you begin with cloud services
Understanding NetApp Cloud Central and Kubernetes information
Cloud Central accounts
What happens behind the scenes
Types of clusters on NetApp HCI
Kubernetes pods, volumes, and projects
Getting a NetApp Kubernetes Service API token
Enabling cloud services with NetApp Hybrid Cloud Control
Creating Kubernetes clusters
Creating a project within a NetApp Kubernetes Service workspace
Adding applications to your Kubernetes cluster
Expanding your NetApp HCI installation
Expanding NetApp HCI storage resources
Expanding NetApp HCI compute resources
Expanding NetApp HCI storage and compute resources at the same time
Monitoring your NetApp HCI installation
Using VCP to manage NetApp HCI
About this guide
vCenter Plug-in overview
Network port requirements
VMware vSphere prerequisites
Getting started
Installing the NetApp Element Plug-in for vCenter Server
Upgrading the vCenter Plug-in
Upgrading vCenter Server
Installing a management node
Registering the vCenter Plug-in with vCenter
Modifying vCenter properties for an in-house (dark site) HTTP server
Upgrading the management node
Upgrading the management node to version 11.7 from version 11.5
Upgrading the management node to version 11.7 from version 11.3
Upgrading the management node to version 11.7 from version 11.0 or 11.1
Migrating from management node 10.x to version 11.x
Configuring a storage NIC (eth1)
Persistent volumes
Updating the vCenter Plug-in registration for vCSA
Updating the vCenter plug-in registration for Windows vCenter
Updating management services
Updating management services with NetApp Hybrid Cloud Control
Updating management services using mNode API
Accessing the plug-in after installation
How to use the NetApp Element Plug-in for vCenter Server
NetApp Element Configuration Extension Point
NetApp Element Management Extension Point
vCenter Linked Mode
Using object naming best practices when managing multiple clusters
Cluster configuration
Adding a cluster
Viewing cluster details
Cluster details
Individual cluster details
Editing cluster profiles
Removing a cluster profile
Enabling virtual volumes
Enabling encryption at rest
Disabling encryption at rest
Enabling SSH
Disabling SSH
Changing the SSH time limit
Setting protection domain monitoring
Shutting down a cluster
Expanding your NetApp HCI
Management node (mNode) settings
Configuring management node settings for QoSSIOC
Editing management node settings for QoSSIOC
Clearing management node settings for QoSSIOC
Changing the QoSSIOC service password
Viewing QoSSIOC events
QoSSIOC event details
Plug-in product information
Reporting
Reporting overview
Viewing event logs
Event log
Event types
Alerts
Alert error codes
iSCSI sessions
Running tasks
Volume performance
Management
Datastore management
Creating a datastore
Viewing the datastore list
Datastore details
Extending a datastore
Cloning a datastore
Sharing a datastore
Performing VAAI UNMAP
Deleting a datastore
QoSSIOC automation
Enabling QoSSIOC automation
Disabling QoSSIOC integration
Volume management
Creating a volume
Viewing volumes details
Volume details
Individual volume details
Editing a volume
Cloning a volume
Volume backup and restore operations
Volume backup operations
Backing up a volume to an Amazon S3 object store
Backing up a volume to an OpenStack Swift object store
Backing up a volume to a cluster running Element software
Volume restore operations
Restoring a volume from backup on an Amazon S3 object store
Restoring a volume from backup on an OpenStack Swift object store
Restoring a volume from backup on a cluster running Element software
Deleting volumes
Purging volumes
Restoring deleted volumes
Adding volumes to an access group
Removing volumes from an access group
Applying a QoS policy to multiple volumes
Changing the QoS policy association of a volume
User account management
Creating an account
Account details
Editing an account
Deleting an account
Volume access groups
Creating access groups
Volume access group details
Editing access groups
Deleting access groups
Initiators
Creating an initiator
Initiator details
Editing an initiator
Deleting initiators
Adding initiators to a volume access group
QoS policies
Creating a QoS policy
QoS policy details
Editing a QoS policy
Deleting a QoS policy
Data protection
Volume snapshots
Creating a volume snapshot
Volume snapshot details
Editing snapshots
Cloning a volume from a snapshot
Rolling back a volume to a snapshot
Volume snapshot backup operations
Backing up a volume snapshot to an Amazon S3 object store
Backing up a volume snapshot to an OpenStack Swift object store
Backing up a volume snapshot to a cluster running Element software
Deleting a snapshot
Group snapshots
Creating a group snapshot
Group snapshot details
Editing group snapshots
Cloning volumes from a group snapshot
Rolling back volumes to a group snapshot
Deleting a group snapshot
Snapshot schedules
Creating a snapshot schedule
Snapshot schedule details
Editing a snapshot schedule
Copying a snapshot schedule
Deleting a snapshot schedule
Configuring cluster and volume pairing for real-time remote replication
Pairing clusters
Pairing clusters using known credentials
Pairing clusters with a pairing key
Validating the cluster pair connection
Pairing volumes
Pairing volumes using known credentials
Creating target volumes and pairing them with local volumes
Pairing volumes using a pairing key
Assigning a replication source and target to paired volumes
Validating volume replication
Deleting a volume relationship after replication
Managing volume relationships
Pausing replication
Changing the mode of replication
Deleting volume pairs
Deleting a cluster pair
Volume pair details
Volume pairing messages
Volume pairing warnings
Cluster management
Drives
Adding available drives to a cluster
Drive details
Removing a drive
Nodes
NetApp HCI storage nodes
NetApp HCI compute nodes
SolidFire Storage nodes
SolidFire Fibre Channel nodes
Adding a node to a cluster
Node details
Removing nodes from a cluster
Restarting cluster nodes
Shutting down cluster nodes
VLAN management
Creating a VLAN
Virtual network details
Editing a virtual network
Deleting a virtual network
Virtual volumes
Configuring vSphere Virtual Volumes (VVols) functionality
Registering the NetApp Element VASA Provider
Creating a VVol datastore
Viewing virtual volume details
Virtual volume details
Individual virtual volume details
Storage containers
Creating a storage container
Viewing storage container details
Storage container details
Individual storage container details
Deleting a storage container
Protocol endpoints
Viewing protocol endpoint details
Protocol endpoint details
Individual protocol endpoint details
Unregistering the vCenter Plug-in
Removing the vCenter Plug-in
Troubleshooting
Plug-in registration successful but icons do not appear in web client
Error registering plug-in using Registration UI
Error updating plug-in using Registration UI
Keystore error using Registration UI
Error message that NetApp extension cannot be upgraded
Removing plug-in completes successfully but icons remain
Plug-in cannot be unregistered or removed after admin password change
Plug-in management tasks fail or volumes are not accessible to ESXi host
Failure occurs during vCenter Plug-in use on Firefox 59.0.2 browsers
Delete datastore operation fails
Cluster pair cannot connect using a pairing key
Error message for QoSSIOC status
QoSSIOC service shown as available but is unavailable
QoSSIOC is enabled for datastore but unavailable
Using the management node
About this guide
Management node for Element software
Management services for NetApp HCI
Persistent volumes
Network port requirements
Installing a management node
Upgrading the management node
Upgrading the management node to version 11.7 from version 11.5
Upgrading the management node to version 11.7 from version 11.3
Upgrading the management node to version 11.7 from version 11.0 or 11.1
Migrating from management node 10.x to version 11.x
Configuring a storage NIC (eth1)
Recovering a management node
Working with the management node
Accessing the management node
Accessing the management node per-node UI
Accessing the management node REST API UI
Getting authorization to use REST APIs
NetApp HCI system alerts
Management node network settings
Management node cluster settings
Testing the management node settings
Running system utilities from the management node
Enabling remote NetApp Support connections
Enabling Active IQ and HCI monitoring services for NetApp HCI
Adding an asset to the management node
Configuring a proxy server
Getting logs from management services
Verifying management services version
Updating management services with NetApp Hybrid Cloud Control
Updating management services using mNode API
Setting up and using NetApp HCI 1.6P1
Deploying NetApp HCI
NetApp HCI overview
About this guide
Requirements for NetApp HCI deployment
Network and switch requirements
Network ports used by NetApp HCI
Network cable requirements
Network configuration
Required network segments
Network configuration and cabling options
Configuration option A: Two cables for compute nodes
Configuration option B: Six cables for compute nodes
Configuration option C: Six cables for compute nodes with native VLANs
IP address requirements
Configuring LACP for optimal storage performance
Configuring the IPMI ports
Changing the default compute node IPMI password
DNS and timekeeping requirements
Environmental requirements
Protection Domains
Final preparations
Deploying NetApp HCI
Accessing the NetApp Deployment Engine
Accessing the NetApp Deployment Engine in environments without DHCP
Accessing the NetApp Deployment Engine in environments with DHCP
Manually assigning IP addresses to access the NetApp Deployment Engine
Starting your deployment
VMware vSphere configuration
Configuring a new VMware vSphere environment
Joining an existing VMware vSphere deployment
Configuring credentials
Selecting a network topology
Selecting inventory
Configuring network settings
Reviewing and deploying the configuration
Updating management services
Post-deployment tasks
Supported networking changes
Keeping VMware vSphere up to date
Installing GPU drivers for GPU-enabled compute nodes
Upgrading the entire NetApp HCI installation
Migrating from management node 10.x to version 11.x
Upgrading Element software to version 11.3 on the storage cluster
Determining the Element version on the management node
Using HealthTools to run pre-upgrade health checks
Checking the installed version of HealthTools
Checking the installed version of HealthTools on dark sites
Updating HealthTools
Checking for upgrade readiness
Upgrading Element software
What happens when an upgrade fails
Upgrading Element software at dark sites
Upgrading the management node to version 11.3
Updating management services
Updating compute node firmware
Updating compute node drivers
Updating the vCenter Plug-in registration for vCSA
Accessing NetApp Hybrid Cloud Control
Upgrading management services with NetApp Hybrid Cloud Control
Enabling cloud services on NetApp HCI
Requirements before you begin with cloud services
Understanding NetApp Cloud Central and Kubernetes information
Cloud Central accounts
What happens behind the scenes
Types of clusters on NetApp HCI
Kubernetes pods, volumes, and projects
Getting a NetApp Kubernetes Service API token
Enabling cloud services with NetApp Hybrid Cloud Control
Creating Kubernetes clusters
Creating a project within a NetApp Kubernetes Service workspace
Adding applications to your Kubernetes cluster
Expanding your NetApp HCI installation
Expanding NetApp HCI storage resources
Expanding NetApp HCI compute resources
Expanding NetApp HCI storage and compute resources at the same time
Monitoring your NetApp HCI installation
Using VCP to manage NetApp HCI
About this guide
vCenter Plug-in overview
Network port requirements
VMware vSphere prerequisites
Getting started
Installing the NetApp Element Plug-in for vCenter Server
Upgrading the vCenter Plug-in
Upgrading vCenter Server
Installing a management node
Registering the vCenter Plug-in with vCenter
Modifying vCenter properties for an in-house (dark site) HTTP server
Upgrading the management node to version 11.3
Configuring a storage NIC (eth1)
Persistent volumes
Updating management services
Updating the vCenter Plug-in registration for vCSA
Updating the vCenter plug-in registration for Windows vCenter
Accessing the plug-in after installation
How to use the NetApp Element Plug-in for vCenter Server
NetApp Element Configuration Extension Point
NetApp Element Management Extension Point
vCenter Linked Mode
Using object naming best practices when managing multiple clusters
Cluster configuration
Adding a cluster
Viewing cluster details
Cluster details
Individual cluster details
Editing cluster profiles
Removing a cluster profile
Enabling virtual volumes
Enabling encryption at rest
Disabling encryption at rest
Enabling SSH
Disabling SSH
Changing the SSH time limit
Setting protection domain monitoring
Shutting down a cluster
Expanding your NetApp HCI
Management node (mNode) settings
Configuring management node settings for QoSSIOC
Editing management node settings for QoSSIOC
Clearing management node settings for QoSSIOC
Changing the QoSSIOC service password
Viewing QoSSIOC events
QoSSIOC event details
Plug-in product information
Reporting
Reporting overview
Viewing event logs
Event log
Event types
Alerts
Alert error codes
iSCSI sessions
Running tasks
Volume performance
Management
Datastore management
Creating a datastore
Viewing the datastore list
Datastore details
Extending a datastore
Cloning a datastore
Sharing a datastore
Performing VAAI UNMAP
Deleting a datastore
QoSSIOC automation
Enabling QoSSIOC automation
Disabling QoSSIOC integration
Volume management
Creating a volume
Viewing volumes details
Volume details
Individual volume details
Editing a volume
Cloning a volume
Volume backup and restore operations
Volume backup operations
Backing up a volume to an Amazon S3 object store
Backing up a volume to an OpenStack Swift object store
Backing up a volume to a cluster running Element software
Volume restore operations
Restoring a volume from backup on an Amazon S3 object store
Restoring a volume from backup on an OpenStack Swift object store
Restoring a volume from backup on a cluster running Element software
Deleting volumes
Purging volumes
Restoring deleted volumes
Adding volumes to an access group
Removing volumes from an access group
Applying a QoS policy to multiple volumes
Changing the QoS policy association of a volume
User account management
Creating an account
Account details
Editing an account
Deleting an account
Volume access groups
Creating access groups
Volume access group details
Editing access groups
Deleting access groups
Initiators
Creating an initiator
Initiator details
Editing an initiator
Deleting initiators
Adding initiators to a volume access group
QoS policies
Creating a QoS policy
QoS policy details
Editing a QoS policy
Deleting a QoS policy
Data protection
Volume snapshots
Creating a volume snapshot
Volume snapshot details
Editing snapshots
Cloning a volume from a snapshot
Rolling back a volume to a snapshot
Volume snapshot backup operations
Backing up a volume snapshot to an Amazon S3 object store
Backing up a volume snapshot to an OpenStack Swift object store
Backing up a volume snapshot to a cluster running Element software
Deleting a snapshot
Group snapshots
Creating a group snapshot
Group snapshot details
Editing group snapshots
Cloning volumes from a group snapshot
Rolling back volumes to a group snapshot
Deleting a group snapshot
Snapshot schedules
Creating a snapshot schedule
Snapshot schedule details
Editing a snapshot schedule
Copying a snapshot schedule
Deleting a snapshot schedule
Configuring cluster and volume pairing for real-time remote replication
Pairing clusters
Pairing clusters using known credentials
Pairing clusters with a pairing key
Validating the cluster pair connection
Pairing volumes
Pairing volumes using known credentials
Creating target volumes and pairing them with local volumes
Pairing volumes using a pairing key
Assigning a replication source and target to paired volumes
Validating volume replication
Deleting a volume relationship after replication
Managing volume relationships
Pausing replication
Changing the mode of replication
Deleting volume pairs
Deleting a cluster pair
Volume pair details
Volume pairing messages
Volume pairing warnings
Cluster management
Drives
Adding available drives to a cluster
Drive details
Removing a drive
Nodes
NetApp HCI storage nodes
NetApp HCI compute nodes
SolidFire Storage nodes
SolidFire Fibre Channel nodes
Adding a node to a cluster
Node details
Removing nodes from a cluster
Restarting cluster nodes
Shutting down cluster nodes
VLAN management
Creating a VLAN
Virtual network details
Editing a virtual network
Deleting a virtual network
Virtual volumes
Configuring vSphere Virtual Volumes (VVols) functionality
Registering the NetApp Element VASA Provider
Creating a VVol datastore
Viewing virtual volume details
Virtual volume details
Individual virtual volume details
Storage containers
Creating a storage container
Viewing storage container details
Storage container details
Individual storage container details
Deleting a storage container
Protocol endpoints
Viewing protocol endpoint details
Protocol endpoint details
Individual protocol endpoint details
Unregistering the vCenter Plug-in
Removing the vCenter Plug-in
Troubleshooting
Plug-in registration successful but icons do not appear in web client
Error registering plug-in using Registration UI
Error updating plug-in using Registration UI
Keystore error using Registration UI
Error message that NetApp extension cannot be upgraded
Removing plug-in completes successfully but icons remain
Plug-in cannot be unregistered or removed after admin password change
Plug-in management tasks fail or volumes are not accessible to ESXi host
Failure occurs during vCenter Plug-in use on Firefox 59.0.2 browsers
Delete datastore operation fails
Cluster pair cannot connect using a pairing key
Error message for QoSSIOC status
QoSSIOC service shown as available but is unavailable
QoSSIOC is enabled for datastore but unavailable
Using the management node
About this guide
Management node for Element software
Management services for NetApp HCI
Persistent volumes
Network port requirements
Installing a management node
Upgrading the management node to version 11.3
Configuring a storage NIC (eth1)
Recovering a management node
Working with the management node
Accessing the management node
Accessing the management node per-node UI
Accessing the management node REST API UI
Getting authorization to use REST APIs
NetApp HCI system alerts
Management node network settings
Management node cluster settings
Testing the management node settings
Running system utilities from the management node
Enabling remote NetApp Support connections
Enabling Active IQ and HCI monitoring services for NetApp HCI
Configuring a proxy server
Getting logs from management services
Verifying management services version
Updating management services
Deploying NetApp HCI
NetApp HCI overview
About this guide
Requirements for NetApp HCI deployment
Network and switch requirements
Network ports used by NetApp HCI
Network cable requirements
Network configuration
Required network segments
Network configuration and cabling options
Configuration option A: Two cables for compute nodes
Configuration option B: Six cables for compute nodes
Configuration option C: Six cables for compute nodes with native VLANs
IP address requirements
Configuring LACP for optimal storage performance
Configuring the IPMI ports
Changing the default compute node IPMI password
DNS and timekeeping requirements
Environmental requirements
Protection Domains
Final preparations
Deploying NetApp HCI
Accessing the NetApp Deployment Engine
Accessing the NetApp Deployment Engine in environments without DHCP
Accessing the NetApp Deployment Engine in environments with DHCP
Manually assigning IP addresses to access the NetApp Deployment Engine
Starting your deployment
VMware vSphere configuration
Configuring a new VMware vSphere environment
Joining an existing VMware vSphere deployment
Configuring credentials
Selecting a network topology
Selecting inventory
Configuring network settings
Reviewing and deploying the configuration
Updating management services
Post-deployment tasks
Supported networking changes
Keeping VMware vSphere up to date
Installing GPU drivers for GPU-enabled compute nodes
Upgrading the entire NetApp HCI installation
Migrating from management node 10.x to version 11.x
Upgrading Element software to version 11.3 on the storage cluster
Determining the Element version on the management node
Using HealthTools to run pre-upgrade health checks
Checking the installed version of HealthTools
Checking the installed version of HealthTools on dark sites
Updating HealthTools
Checking for upgrade readiness
Upgrading Element software
What happens when an upgrade fails
Upgrading Element software at dark sites
Upgrading the management node to version 11.3
Updating management services
Updating compute node firmware
Updating compute node drivers
Updating the vCenter Plug-in registration for vCSA
Accessing NetApp Hybrid Cloud Control
Upgrading management services with NetApp Hybrid Cloud Control
Enabling cloud services on NetApp HCI
Requirements before you begin with cloud services
Understanding NetApp Cloud Central and Kubernetes information
Cloud Central accounts
What happens behind the scenes
Types of clusters on NetApp HCI
Kubernetes pods, volumes, and projects
Getting a NetApp Kubernetes Service API token
Enabling cloud services with NetApp Hybrid Cloud Control
Creating Kubernetes clusters
Creating a project within a NetApp Kubernetes Service workspace
Adding applications to your Kubernetes cluster
Expanding your NetApp HCI installation
Expanding NetApp HCI storage resources
Expanding NetApp HCI compute resources
Expanding NetApp HCI storage and compute resources at the same time
Monitoring your NetApp HCI installation
Using VCP to manage NetApp HCI
About this guide
vCenter Plug-in overview
Network port requirements
VMware vSphere prerequisites
Getting started
Installing the NetApp Element Plug-in for vCenter Server
Upgrading the vCenter Plug-in
Upgrading vCenter Server
Installing a management node
Registering the vCenter Plug-in with vCenter
Modifying vCenter properties for an in-house (dark site) HTTP server
Upgrading the management node to version 11.3
Configuring a storage NIC (eth1)
Persistent volumes
Updating management services
Updating the vCenter Plug-in registration for vCSA
Updating the vCenter plug-in registration for Windows vCenter
Accessing the plug-in after installation
How to use the NetApp Element Plug-in for vCenter Server
NetApp Element Configuration Extension Point
NetApp Element Management Extension Point
vCenter Linked Mode
Using object naming best practices when managing multiple clusters
Cluster configuration
Adding a cluster
Viewing cluster details
Cluster details
Individual cluster details
Editing cluster profiles
Removing a cluster profile
Enabling virtual volumes
Enabling encryption at rest
Disabling encryption at rest
Enabling SSH
Disabling SSH
Changing the SSH time limit
Setting protection domain monitoring
Shutting down a cluster
Expanding your NetApp HCI
Management node (mNode) settings
Configuring management node settings for QoSSIOC
Editing management node settings for QoSSIOC
Clearing management node settings for QoSSIOC
Changing the QoSSIOC service password
Viewing QoSSIOC events
QoSSIOC event details
Plug-in product information
Reporting
Reporting overview
Viewing event logs
Event log
Event types
Alerts
Alert error codes
iSCSI sessions
Running tasks
Volume performance
Management
Datastore management
Creating a datastore
Viewing the datastore list
Datastore details
Extending a datastore
Cloning a datastore
Sharing a datastore
Performing VAAI UNMAP
Deleting a datastore
QoSSIOC automation
Enabling QoSSIOC automation
Disabling QoSSIOC integration
Volume management
Creating a volume
Viewing volumes details
Volume details
Individual volume details
Editing a volume
Cloning a volume
Volume backup and restore operations
Volume backup operations
Backing up a volume to an Amazon S3 object store
Backing up a volume to an OpenStack Swift object store
Backing up a volume to a cluster running Element software
Volume restore operations
Restoring a volume from backup on an Amazon S3 object store
Restoring a volume from backup on an OpenStack Swift object store
Restoring a volume from backup on a cluster running Element software
Deleting volumes
Purging volumes
Restoring deleted volumes
Adding volumes to an access group
Removing volumes from an access group
Applying a QoS policy to multiple volumes
Changing the QoS policy association of a volume
User account management
Creating an account
Account details
Editing an account
Deleting an account
Volume access groups
Creating access groups
Volume access group details
Editing access groups
Deleting access groups
Initiators
Creating an initiator
Initiator details
Editing an initiator
Deleting initiators
Adding initiators to a volume access group
QoS policies
Creating a QoS policy
QoS policy details
Editing a QoS policy
Deleting a QoS policy
Data protection
Volume snapshots
Creating a volume snapshot
Volume snapshot details
Editing snapshots
Cloning a volume from a snapshot
Rolling back a volume to a snapshot
Volume snapshot backup operations
Backing up a volume snapshot to an Amazon S3 object store
Backing up a volume snapshot to an OpenStack Swift object store
Backing up a volume snapshot to a cluster running Element software
Deleting a snapshot
Group snapshots
Creating a group snapshot
Group snapshot details
Editing group snapshots
Cloning volumes from a group snapshot
Rolling back volumes to a group snapshot
Deleting a group snapshot
Snapshot schedules
Creating a snapshot schedule
Snapshot schedule details
Editing a snapshot schedule
Copying a snapshot schedule
Deleting a snapshot schedule
Configuring cluster and volume pairing for real-time remote replication
Pairing clusters
Pairing clusters using known credentials
Pairing clusters with a pairing key
Validating the cluster pair connection
Pairing volumes
Pairing volumes using known credentials
Creating target volumes and pairing them with local volumes
Pairing volumes using a pairing key
Assigning a replication source and target to paired volumes
Validating volume replication
Deleting a volume relationship after replication
Managing volume relationships
Pausing replication
Changing the mode of replication
Deleting volume pairs
Deleting a cluster pair
Volume pair details
Volume pairing messages
Volume pairing warnings
Cluster management
Drives
Adding available drives to a cluster
Drive details
Removing a drive
Nodes
NetApp HCI storage nodes
NetApp HCI compute nodes
SolidFire Storage nodes
SolidFire Fibre Channel nodes
Adding a node to a cluster
Node details
Removing nodes from a cluster
Restarting cluster nodes
Shutting down cluster nodes
VLAN management
Creating a VLAN
Virtual network details
Editing a virtual network
Deleting a virtual network
Virtual volumes
Configuring vSphere Virtual Volumes (VVols) functionality
Registering the NetApp Element VASA Provider
Creating a VVol datastore
Viewing virtual volume details
Virtual volume details
Individual virtual volume details
Storage containers
Creating a storage container
Viewing storage container details
Storage container details
Individual storage container details
Deleting a storage container
Protocol endpoints
Viewing protocol endpoint details
Protocol endpoint details
Individual protocol endpoint details
Unregistering the vCenter Plug-in
Removing the vCenter Plug-in
Troubleshooting
Plug-in registration successful but icons do not appear in web client
Error registering plug-in using Registration UI
Error updating plug-in using Registration UI
Keystore error using Registration UI
Error message that NetApp extension cannot be upgraded
Removing plug-in completes successfully but icons remain
Plug-in cannot be unregistered or removed after admin password change
Plug-in management tasks fail or volumes are not accessible to ESXi host
Failure occurs during vCenter Plug-in use on Firefox 59.0.2 browsers
Delete datastore operation fails
Cluster pair cannot connect using a pairing key
Error message for QoSSIOC status
QoSSIOC service shown as available but is unavailable
QoSSIOC is enabled for datastore but unavailable
Using the management node
About this guide
Management node for Element software
Management services for NetApp HCI
Persistent volumes
Network port requirements
Installing a management node
Upgrading the management node to version 11.3
Configuring a storage NIC (eth1)
Recovering a management node
Working with the management node
Accessing the management node
Accessing the management node per-node UI
Accessing the management node REST API UI
Getting authorization to use REST APIs
NetApp HCI system alerts
Management node network settings
Management node cluster settings
Testing the management node settings
Running system utilities from the management node
Enabling remote NetApp Support connections
Enabling Active IQ and HCI monitoring services for NetApp HCI
Configuring a proxy server
Getting logs from management services
Verifying management services version
Updating management services
Configuración y uso de NetApp HCI 1.4P2 y 1.4
Implementar HCI de NetApp
Información general de HCI de NetApp
Requisitos para la implementación de HCI de NetApp
Requisitos de switch y red
Puertos de red que utiliza HCI de NetApp
Requisitos de cables de red
Configuración de red
Segmentos de red requeridos
Opciones de configuración y cableado de red
Opción de configuración A: Dos cables para nodos de computación
Opción de configuración B: Seis cables para nodos de computación
Opción de configuración C: Seis cables para nodos de computación con VLAN nativas
Requisitos de dirección IP
Configurar LACP para alcanzar un rendimiento de almacenamiento óptimo
Configurar puertos IPMI
Cambiar la contraseña de IPMI
Requisitos de DNS y de control del tiempo
Requisitos del entorno
Protection Domains
Preparaciones finales
Implementar HCI de NetApp
Acceder al motor de implementación de NetApp
Acceder al motor de implementación de NetApp en entornos sin DHCP
Acceder al motor de implementación de NetApp en entornos con DHCP
Asignar manualmente todas las direcciones IP para acceder al motor de implementación de NetApp
Iniciar la implementación
Habilitar los servicios Data Fabric
Configuración de VMware vCenter
Configurar un nuevo entorno de VMware vCenter Server
Configurar credenciales
Seleccionar una topología de red
Seleccionar un inventario
Configurar ajustes de red
Revisar e implementar la configuración
Tareas posteriores a la implementación
Migrar a una instancia existente de vCenter
Configurar servicios de archivos con tecnología ONTAP
Mantener actualizado VMware vSphere
Ampliar una instalación existente de HCI de NetApp
Ampliar los recursos de almacenamiento de HCI de NetApp
Ampliar los recursos de computación de HCI de NetApp
Acceder a SolidFire Active IQ de NetApp
Alertas del sistema HCI de NetApp
Using VCP to manage NetApp HCI
About this guide
vCenter Plug-in overview
Network port requirements
VMware vSphere prerequisites
Getting started
Installing the NetApp Element Plug-in for vCenter Server
Upgrading the vCenter Plug-in
Upgrading vCenter Server
Deploying a new management node
Registering the vCenter Plug-in with vCenter
Modifying vCenter properties for an in-house (dark site) HTTP server
Upgrading a management node
Updating the vCenter Plug-in registration for vCSA
Updating the vCenter plug-in registration for Windows vCenter
Accessing the plug-in after installation
How to use the NetApp Element Plug-in for vCenter Server
NetApp Element Configuration Extension Point
NetApp Element Management Extension Point
vCenter Linked Mode
Using object naming best practices when managing multiple clusters
Cluster configuration
Adding a cluster
Viewing cluster details
Cluster details
Individual cluster details
Editing cluster profiles
Removing a cluster profile
Enabling virtual volumes
Enabling encryption at rest
Disabling encryption at rest
Enabling SSH
Disabling SSH
Changing the SSH time limit
Setting protection domain monitoring
Shutting down a cluster
Expanding your NetApp HCI
Management node (mNode) settings
Configuring management node settings for QoSSIOC
Editing management node settings for QoSSIOC
Clearing management node settings for QoSSIOC
Changing the QoSSIOC service password
Viewing QoSSIOC events
QoSSIOC event details
Plug-in product information
Reporting
Reporting overview
Viewing event logs
Event log
Event types
Alerts
Alert error codes
iSCSI sessions
Running tasks
Volume performance
Management
Datastore management
Creating a datastore
Viewing the datastore list
Datastore details
Extending a datastore
Cloning a datastore
Sharing a datastore
Performing VAAI UNMAP
Deleting a datastore
QoSSIOC automation
Enabling QoSSIOC automation
Disabling QoSSIOC integration
Volume management
Creating a volume
Viewing volumes details
Volume details
Individual volume details
Editing a volume
Cloning a volume
Volume backup and restore operations
Volume backup operations
Backing up a volume to an Amazon S3 object store
Backing up a volume to an OpenStack Swift object store
Backing up a volume to a cluster running Element software
Volume restore operations
Restoring a volume from backup on an Amazon S3 object store
Restoring a volume from backup on an OpenStack Swift object store
Restoring a volume from backup on a cluster running Element software
Deleting volumes
Purging volumes
Restoring deleted volumes
Adding volumes to an access group
Removing volumes from an access group
Applying a QoS policy to multiple volumes
Changing the QoS policy association of a volume
User account management
Creating an account
Account details
Editing an account
Deleting an account
Volume access groups
Creating access groups
Volume access group details
Editing access groups
Deleting access groups
Initiators
Creating an initiator
Initiator details
Editing an initiator
Deleting initiators
Adding initiators to a volume access group
QoS policies
Creating a QoS policy
QoS policy details
Editing a QoS policy
Deleting a QoS policy
Data protection
Volume snapshots
Creating a volume snapshot
Volume snapshot details
Editing snapshots
Cloning a volume from a snapshot
Rolling back a volume to a snapshot
Volume snapshot backup operations
Backing up a volume snapshot to an Amazon S3 object store
Backing up a volume snapshot to an OpenStack Swift object store
Backing up a volume snapshot to a cluster running Element software
Deleting a snapshot
Group snapshots
Creating a group snapshot
Group snapshot details
Editing group snapshots
Cloning volumes from a group snapshot
Rolling back volumes to a group snapshot
Deleting a group snapshot
Snapshot schedules
Creating a snapshot schedule
Snapshot schedule details
Editing a snapshot schedule
Copying a snapshot schedule
Deleting a snapshot schedule
Real-time replication
Configuring cluster and volume pairing for real-time remote replication
Cluster pairs
Pairing clusters
Pairing clusters using known credentials
Pairing clusters with a pairing key
Cluster pair details
Deleting a cluster pair
Volume pairs
Pairing volumes
Pairing volumes using known credentials
Creating target volumes and pairing them with local volumes
Pairing volumes using a pairing key
Assigning a replication source and target to paired volumes
Volume pair details
Volume pairing messages
Volume pairing warnings
Pausing replication
Deleting volume pairs
Cluster management
Drives
Adding available drives to a cluster
Drive details
Removing a drive
Nodes
NetApp HCI storage nodes
NetApp HCI compute nodes
Adding a node to a cluster
Node details
Removing nodes from a cluster
Restarting cluster nodes
Shutting down cluster nodes
VLAN management
Creating a VLAN
Virtual network details
Editing a virtual network
Deleting a virtual network
Virtual volumes
Configuring vSphere Virtual Volumes (VVols) functionality
Registering the NetApp Element VASA Provider
Creating a VVol datastore
Viewing virtual volume details
Virtual volume details
Individual virtual volume details
Storage containers
Creating a storage container
Viewing storage container details
Storage container details
Individual storage container details
Deleting a storage container
Protocol endpoints
Viewing protocol endpoint details
Protocol endpoint details
Individual protocol endpoint details
Unregistering the vCenter Plug-in
Removing the vCenter Plug-in
Troubleshooting
Plug-in registration successful but icons do not appear in web client
Error registering plug-in using Registration UI
Error updating plug-in using Registration UI
Keystore error using Registration UI
Error message that NetApp extension cannot be upgraded
Removing plug-in completes successfully but icons remain
Plug-in cannot be unregistered or removed after admin password change
Plug-in management tasks fail or volumes are not accessible to ESXi host
Failure occurs during vCenter Plug-in use on Firefox 59.0.2 browsers
Delete datastore operation fails
Cluster pair cannot connect using a pairing key
Error message for QoSSIOC status
QoSSIOC service shown as available but is unavailable
QoSSIOC is enabled for datastore but unavailable
Implementar HCI de NetApp
Información general de HCI de NetApp
Requisitos para la implementación de HCI de NetApp
Requisitos de switch y red
Puertos de red que utiliza HCI de NetApp
Requisitos de cables de red
Configuración de red
Segmentos de red requeridos
Opciones de configuración y cableado de red
Opción de configuración A: Dos cables para nodos de computación
Opción de configuración B: Seis cables para nodos de computación
Opción de configuración C: Seis cables para nodos de computación con VLAN nativas
Requisitos de dirección IP
Configurar LACP para alcanzar un rendimiento de almacenamiento óptimo
Configurar puertos IPMI
Cambiar la contraseña de IPMI
Requisitos de DNS y de control del tiempo
Requisitos del entorno
Protection Domains
Preparaciones finales
Implementar HCI de NetApp
Acceder al motor de implementación de NetApp
Acceder al motor de implementación de NetApp en entornos sin DHCP
Acceder al motor de implementación de NetApp en entornos con DHCP
Asignar manualmente todas las direcciones IP para acceder al motor de implementación de NetApp
Iniciar la implementación
Habilitar los servicios Data Fabric
Configuración de VMware vCenter
Configurar un nuevo entorno de VMware vCenter Server
Configurar credenciales
Seleccionar una topología de red
Seleccionar un inventario
Configurar ajustes de red
Revisar e implementar la configuración
Tareas posteriores a la implementación
Migrar a una instancia existente de vCenter
Configurar servicios de archivos con tecnología ONTAP
Mantener actualizado VMware vSphere
Ampliar una instalación existente de HCI de NetApp
Ampliar los recursos de almacenamiento de HCI de NetApp
Ampliar los recursos de computación de HCI de NetApp
Acceder a SolidFire Active IQ de NetApp
Alertas del sistema HCI de NetApp
Using VCP to manage NetApp HCI
About this guide
vCenter Plug-in overview
Network port requirements
VMware vSphere prerequisites
Getting started
Installing the NetApp Element Plug-in for vCenter Server
Upgrading the vCenter Plug-in
Upgrading vCenter Server
Deploying a new management node
Registering the vCenter Plug-in with vCenter
Modifying vCenter properties for an in-house (dark site) HTTP server
Upgrading a management node
Updating the vCenter Plug-in registration for vCSA
Updating the vCenter plug-in registration for Windows vCenter
Accessing the plug-in after installation
How to use the NetApp Element Plug-in for vCenter Server
NetApp Element Configuration Extension Point
NetApp Element Management Extension Point
vCenter Linked Mode
Using object naming best practices when managing multiple clusters
Cluster configuration
Adding a cluster
Viewing cluster details
Cluster details
Individual cluster details
Editing cluster profiles
Removing a cluster profile
Enabling virtual volumes
Enabling encryption at rest
Disabling encryption at rest
Enabling SSH
Disabling SSH
Changing the SSH time limit
Setting protection domain monitoring
Shutting down a cluster
Expanding your NetApp HCI
Management node (mNode) settings
Configuring management node settings for QoSSIOC
Editing management node settings for QoSSIOC
Clearing management node settings for QoSSIOC
Changing the QoSSIOC service password
Viewing QoSSIOC events
QoSSIOC event details
Plug-in product information
Reporting
Reporting overview
Viewing event logs
Event log
Event types
Alerts
Alert error codes
iSCSI sessions
Running tasks
Volume performance
Management
Datastore management
Creating a datastore
Viewing the datastore list
Datastore details
Extending a datastore
Cloning a datastore
Sharing a datastore
Performing VAAI UNMAP
Deleting a datastore
QoSSIOC automation
Enabling QoSSIOC automation
Disabling QoSSIOC integration
Volume management
Creating a volume
Viewing volumes details
Volume details
Individual volume details
Editing a volume
Cloning a volume
Volume backup and restore operations
Volume backup operations
Backing up a volume to an Amazon S3 object store
Backing up a volume to an OpenStack Swift object store
Backing up a volume to a cluster running Element software
Volume restore operations
Restoring a volume from backup on an Amazon S3 object store
Restoring a volume from backup on an OpenStack Swift object store
Restoring a volume from backup on a cluster running Element software
Deleting volumes
Purging volumes
Restoring deleted volumes
Adding volumes to an access group
Removing volumes from an access group
Applying a QoS policy to multiple volumes
Changing the QoS policy association of a volume
User account management
Creating an account
Account details
Editing an account
Deleting an account
Volume access groups
Creating access groups
Volume access group details
Editing access groups
Deleting access groups
Initiators
Creating an initiator
Initiator details
Editing an initiator
Deleting initiators
Adding initiators to a volume access group
QoS policies
Creating a QoS policy
QoS policy details
Editing a QoS policy
Deleting a QoS policy
Data protection
Volume snapshots
Creating a volume snapshot
Volume snapshot details
Editing snapshots
Cloning a volume from a snapshot
Rolling back a volume to a snapshot
Volume snapshot backup operations
Backing up a volume snapshot to an Amazon S3 object store
Backing up a volume snapshot to an OpenStack Swift object store
Backing up a volume snapshot to a cluster running Element software
Deleting a snapshot
Group snapshots
Creating a group snapshot
Group snapshot details
Editing group snapshots
Cloning volumes from a group snapshot
Rolling back volumes to a group snapshot
Deleting a group snapshot
Snapshot schedules
Creating a snapshot schedule
Snapshot schedule details
Editing a snapshot schedule
Copying a snapshot schedule
Deleting a snapshot schedule
Real-time replication
Configuring cluster and volume pairing for real-time remote replication
Cluster pairs
Pairing clusters
Pairing clusters using known credentials
Pairing clusters with a pairing key
Cluster pair details
Deleting a cluster pair
Volume pairs
Pairing volumes
Pairing volumes using known credentials
Creating target volumes and pairing them with local volumes
Pairing volumes using a pairing key
Assigning a replication source and target to paired volumes
Volume pair details
Volume pairing messages
Volume pairing warnings
Pausing replication
Deleting volume pairs
Cluster management
Drives
Adding available drives to a cluster
Drive details
Removing a drive
Nodes
NetApp HCI storage nodes
NetApp HCI compute nodes
Adding a node to a cluster
Node details
Removing nodes from a cluster
Restarting cluster nodes
Shutting down cluster nodes
VLAN management
Creating a VLAN
Virtual network details
Editing a virtual network
Deleting a virtual network
Virtual volumes
Configuring vSphere Virtual Volumes (VVols) functionality
Registering the NetApp Element VASA Provider
Creating a VVol datastore
Viewing virtual volume details
Virtual volume details
Individual virtual volume details
Storage containers
Creating a storage container
Viewing storage container details
Storage container details
Individual storage container details
Deleting a storage container
Protocol endpoints
Viewing protocol endpoint details
Protocol endpoint details
Individual protocol endpoint details
Unregistering the vCenter Plug-in
Removing the vCenter Plug-in
Troubleshooting
Plug-in registration successful but icons do not appear in web client
Error registering plug-in using Registration UI
Error updating plug-in using Registration UI
Keystore error using Registration UI
Error message that NetApp extension cannot be upgraded
Removing plug-in completes successfully but icons remain
Plug-in cannot be unregistered or removed after admin password change
Plug-in management tasks fail or volumes are not accessible to ESXi host
Failure occurs during vCenter Plug-in use on Firefox 59.0.2 browsers
Delete datastore operation fails
Cluster pair cannot connect using a pairing key
Error message for QoSSIOC status
QoSSIOC service shown as available but is unavailable
QoSSIOC is enabled for datastore but unavailable
Maintaining hardware
DC power supply unit replacement for H615C and H610S nodes
DIMM replacement for compute nodes
Drive replacement for H410S storage nodes
Drive replacement for H610S storage nodes
H-series 2U chassis replacement
H410C node replacement
H410S node replacement
H610C and H615C nodes replacement
H610S node replacement
Power supply unit replacement
DC power supply unit replacement for H615C and H610S nodes
DIMM replacement for compute nodes
Drive replacement for H410S storage nodes
Drive replacement for H610S storage nodes
H-series 2U chassis replacement
H410C node replacement
H410S node replacement
H610C and H615C nodes replacement
H610S node replacement
Power supply unit replacement
Uso del centro de documentación
Visita guiada
Ayuda
Búsqueda de contenido
Aplicación de un filtro
Impresión de contenido
Guardado y uso compartido de enlaces
Envío de comentarios
Descarga de PDF o EPUB para uso sin conexión
Consejos
Mejora de los resultados de búsqueda
Dispositivos móviles
Entorno en varios idiomas
Visita guiada
Ayuda
Búsqueda de contenido
Aplicación de un filtro
Impresión de contenido
Guardado y uso compartido de enlaces
Envío de comentarios
Descarga de PDF o EPUB para uso sin conexión
Consejos
Mejora de los resultados de búsqueda
Dispositivos móviles
Entorno en varios idiomas
Avisos legales
Copyright, marca comercial, patente, privacidad y traducción automática
Copyright
Marca comercial
Patente
Privacidad
Traducción automática
Open source
Management node
NetApp Element software
NetApp Element Plug-in for vCenter Server
NetApp HCI Bootstrap OS
NetApp Monitoring Agent for vCenter
Copyright, marca comercial, patente, privacidad y traducción automática
Copyright
Marca comercial
Patente
Privacidad
Traducción automática
Open source
Management node
NetApp Element software
NetApp Element Plug-in for vCenter Server
NetApp HCI Bootstrap OS
NetApp Monitoring Agent for vCenter
NetApp HCI 18P1
Link to the 1.8P1 Release Notes
Link to the 1.8P1 Release Notes