[HCI 1.6] Configuring network settings

NetApp HCI provides a network settings page with an easy form to simplify network configuration. When you complete the easy form, NetApp HCI automatically populates much of the rest of the information on the network settings page. You can then enter final network settings and verify that the network configuration is correct before proceeding. You do not need to complete the form in its entirety.

Before you begin

You have obtained the following information:
- The planned naming prefix for the hosts and storage cluster
- All planned subnet mask, starting IP address, default gateway, and VLAN IDs for the management, iSCSI, and vMotion networks
- The IP address, default gateway, VLAN IDs, and subnet mask information for any planned VMware vCenter deployment
- The Network Time Protocol (NTP) server address for NetApp HCI
- The DNS server IP address information for NetApp HCI
If you are deploying a vSphere Distributed Switch, you have a vSphere Enterprise Plus license ready to apply after deployment is complete.
If you assigned VLAN IDs to node ports during terminal user interface (TUI) configuration, you have configured those ports with the same VLAN ID during network configuration. You do not need to configure tagged host ports as access ports or native VLANs on the connected switch ports.
You have verified that your network switch configuration is correct. Incorrect switch configurations (such as incorrect VLANs or MTU size) will cause deployment errors.

About this task

If you selected the two-cable network topology for compute nodes, you must use VLAN IDs for the vMotion and storage networks for all compute and storage nodes in the deployment (VLAN IDs are optional for the management networks).

Note: In environments that require host-side VLAN tagging before deployment, if you have configured VLAN IDs on compute and storage nodes so they are discoverable by the NetApp Deployment Engine, ensure you use the correct VLANs when configuring network settings in the NetApp Deployment Engine.

Steps

Optional: To disable live validation of network information you enter on this page, toggle the Live network validation for this page is currently switch to Off. If you enter a VLAN ID during configuration (including the easy form), or if you are using the two-cable compute node topology, network validation is automatically disabled.

In the Infrastructure Services section of the Network Settings page, enter the DNS and NTP server information for NetApp HCI in the following fields:

Field	Description
DNS Server IP Address 1	The IP address of the primary DNS server for NetApp HCI. If you specified a DNS server on the vCenter Configuration page, this field is populated and read-only.
DNS Server IP Address 2 (Optional)	An optional IP address of a secondary DNS server for NetApp HCI.
NTP Server Address 1	The IP address or fully qualified domain name of the primary NTP server for this infrastructure.
NTP Server Address 2 (Optional)	An optional IP address or fully qualified domain name of the secondary NTP server for this infrastructure.

Click To save time, launch the easy form to enter fewer network settings.
The Network Settings Easy Form dialog box appears.
Enter a naming prefix in the Naming Prefix field.
The naming prefix is applied to the hostname of each host and the name of the storage cluster. Prefixes can contain letters, numbers, and hyphens, and cannot exceed 55 characters.

Choose one of the following options for assigning VLAN IDs.

At any time when using the form, click Clear next to a row to clear input from a row of fields.

Note: When you assign VLAN IDs, you are configuring VLAN tags that NetApp HCI will apply to the network traffic. You do not need to enter your native VLAN as a VLAN ID; to use the native VLAN for a network, leave the appropriate field empty.

Option	Steps
Assign VLAN IDs	Select Yes for the Will you assign VLAN IDs option. In the VLAN ID column, enter a VLAN ID for each type of network traffic you want to assign to a VLAN. Both compute vMotion traffic and iSCSI traffic must use an unshared VLAN ID. Click Next. In the Subnet column, enter subnet definitions in CIDR format for each type of network traffic in each network; for example, `192.168.1.0/24`. In the Default Gateway column, enter the IP address of the default gateway for each type of network traffic in each network. In the Starting IP column, enter the first useable IP address for each network subnet in each network.
Do not assign VLAN IDs	Select No for the Will you assign VLAN IDs radio button. In the Subnet column, enter subnet definitions in CIDR format for each type of network traffic in each network; for example, `192.168.1.0/24`. In the Default Gateway column, enter the IP address of the default gateway for each type of network traffic in each network. In the Starting IP column, enter the first useable IP address for each type of network traffic in each network.

Option

Steps

Assign VLAN IDs

Select Yes for the Will you assign VLAN IDs option.
In the VLAN ID column, enter a VLAN ID for each type of network traffic you want to assign to a VLAN.
Both compute vMotion traffic and iSCSI traffic must use an unshared VLAN ID.
Click Next.
In the Subnet column, enter subnet definitions in CIDR format for each type of network traffic in each network; for example, 192.168.1.0/24.
In the Default Gateway column, enter the IP address of the default gateway for each type of network traffic in each network.
In the Starting IP column, enter the first useable IP address for each network subnet in each network.

Do not assign VLAN IDs

Select No for the Will you assign VLAN IDs radio button.
In the Subnet column, enter subnet definitions in CIDR format for each type of network traffic in each network; for example, 192.168.1.0/24.
In the Default Gateway column, enter the IP address of the default gateway for each type of network traffic in each network.
In the Starting IP column, enter the first useable IP address for each type of network traffic in each network.

Click Apply to Network Settings.
Click Yes to confirm.
This populates the Network Settings page with the settings you entered in the easy form.
Verify that the automatically populated data is correct.
Click Continue.