Installing a power supply unit

After you remove the failed power supply unit, slide the replacement power supply unit into the chassis and reconnect the power cord.

Before you begin

You have the replacement power supply unit.

Procedure

  1. Using both hands, align the edges of the power supply unit with the opening in the chassis, and gently push the unit into the chassis using the cam handle, until it locks into place.

    This shows installing the new power supply unit into the chassis.
    Note: The above illustration is only an example. The location of the power supply unit in the chassis and the color of the release button vary depending on the type of chassis you have.
    Attention: Do not use excessive force when sliding the power supply unit into the chassis to prevent damage to the hardware.
  2. Return the cam handle to the upright position.
  3. Plug in the power cord.
  4. Return the failed unit to NetApp by following the instructions in the box that was shipped to you.