Installa il pacchetto di installazione di ONTAP Mediator
Per installare ONTAP Mediator, è necessario scaricare il pacchetto di installazione ed eseguire il programma di installazione sull'host.
|
|
Per aggiornare un'installazione ONTAP Mediator esistente, consulta "Aggiorna ONTAP Mediator" invece. |
-
A partire da ONTAP 9.19.1 e ONTAP Mediator 1.12, puoi installare ONTAP Mediator con supporto per iSCSI e HTTPS, oppure solo con supporto per HTTPS. Se scegli di installare ONTAP Mediator con supporto solo per HTTPS, il pacchetto SCST non viene installato.
-
Se si esegue l'aggiornamento da ONTAP Mediator 1.11 o versioni precedenti con SCST installato e si sceglie l'opzione solo HTTPS durante l'aggiornamento, il pacchetto SCST viene disinstallato e la nuova versione di ONTAP Mediator non contiene il pacchetto SCST.
-
Se hai intenzione di usare ONTAP Mediator per monitorare più configurazioni IP di MetroCluster, il supporto dipende dal tipo di Mediator, dalla versione di ONTAP e dal sistema operativo. Per ulteriori informazioni, consulta "Utilizza ONTAP Mediator per monitorare più configurazioni IP MetroCluster".
-
L'installazione di ONTAP Mediator con supporto solo per HTTPS è supportata nei seguenti casi d'uso:
-
Hai intenzione di utilizzare ONTAP Mediator esclusivamente per monitorare i tuoi SnapMirror cluster di sincronizzazione attivi.
-
Hai intenzione di configurare ONTAP Mediator con HTTPS per monitorare una o più configurazioni IP MetroCluster.
-
-
ONTAP Mediator deve essere installato con il supporto per iSCSI e HTTPS nel seguente scenario:
-
Si prevede di configurare ONTAP Mediator con iSCSI per monitorare una o più configurazioni IP MetroCluster.
-
-
Durante l'installazione o l'aggiornamento a ONTAP Mediator 1.12 o versioni successive, il programma di installazione richiede di rispondere alle seguenti:
ONTAP Mediator can be installed with iSCSI and HTTPS support, or HTTPS support only. Do you wish to install ONTAP Mediator with iSCSI and HTTPS support? Y(es)/n(o):-
Indica
Yesse intendi utilizzare ONTAP Mediator configurato con iSCSI per monitorare una o più configurazioni IP MetroCluster. -
Rispondi
Nose hai intenzione di usare ONTAP Mediator solo per SnapMirror active sync, oppure se hai intenzione di configurare ONTAP Mediator con HTTPS per monitorare una o più configurazioni IP MetroCluster.In alternativa, è possibile utilizzare l' `--https-only`opzione nel `./ontap-mediator-1.13.0/ontap-mediator-1.13.0`comando per specificare solo HTTPS.
-
-
Per i casi d'uso di automazione, puoi usare il comando
./ontap-mediator-1.13.0/ontap-mediator-1.13.0 -yper saltare le richieste dell'installer.
-
Avvia il programma di installazione e rispondi alle richieste quando necessario:
./ontap-mediator-1.13.0/ontap-mediator-1.13.0[root@mediator_host ~]# ./ontap-mediator-1.13.0/ontap-mediator-1.13.0
Per saltare il controllo della firma durante l'installazione, usa il
./ontap-mediator-1.13.0/ontap-mediator-1.13.0 --skip-code-signature-checkcomandoIl programma di installazione crea gli account necessari e installa i pacchetti richiesti. Se ONTAP Mediator è già installato, il programma di installazione ti chiederà di aggiornarlo; per istruzioni ed esempi specifici sull'aggiornamento, consulta "Aggiorna ONTAP Mediator".
Esempio di installazione di ONTAP Mediator con supporto HTTPS e iSCSI (output della console)
[root@mediator-host ~]# ontap-mediator-1.13.0/ontap-mediator-1.13.0 -y ONTAP Mediator: Self Extracting Installer + Extracting the ONTAP Mediator installation/upgrade archive + Performing the ONTAP Mediator run-time code signature check Using openssl from the path: /usr/bin/openssl configured for CApath:/etc/pki/tls Error querying OCSP responder 40B70028217F0000:error:1E800080:HTTP routines:OSSL_HTTP_REQ_CTX_nbio:failed reading data:crypto/http/http_client.c:596: 40B70028217F0000:error:1E800067:HTTP routines:OSSL_HTTP_REQ_CTX_exchange:error receiving:crypto/http/http_client.c:1046:server=http://ocsp.entrust.net:80 WARNING: The OCSP check failed while attempting to test the Code-Signature-Check certificate Continue without code signature checking (only recommended if integrity has been established manually)? y(es)/N(o): yes SKIPPING: Code signature check, manual override due to lack of OCSP response + Unpacking the ONTAP Mediator installer + ONTAP_MEDIATOR_INSTALL_HTTPS_ONLY is set to '0', args are: '' + Starting ONTAP Mediator install/update process: previous installation_mode is '' ONTAP Mediator can be installed with iSCSI and HTTPS support, or HTTPS support only. Do you wish to install ONTAP Mediator with iSCSI and HTTPS support? Y(es)/n(o): yes ONTAP Mediator will be installed with mode: ISCSI_HTTPS + Selected install package mode: ISCSI_HTTPS + Checking that required ports 3260 and 31784 are free ONTAP Mediator requires two user accounts. One for the service (netapp), and one for use by ONTAP to the mediator API (mediatoradmin). Would you like to use the default account names: netapp + mediatoradmin? (Y(es)/n(o)): yes Enter ONTAP Mediator user account (mediatoradmin) password: Re-Enter ONTAP Mediator user account (mediatoradmin) password: + Checking if SELinux is in enforcing mode SELinux is set to Enforcing. ONTAP Mediator server requires modifying the SELinux context of the file /opt/netapp/lib/ontap_mediator/pyenv/bin/uwsgi from type 'lib_t' to 'bin_t'. This is neccessary to start the ONTAP Mediator service while SELinux is set to Enforcing. Allow SELinux context change? Y(es)/n(o): yes The installer will change the SELinux context type of /opt/netapp/lib/ontap_mediator/pyenv/bin/uwsgi from type 'lib_t' to 'bin_t'. + Checking for default Linux firewall Linux firewall is running. Open ports 31784 and 3260? Y(es)/n(o): yes success success success + Installing required packages. Last metadata expiration check: 0:04:17 ago on Mon 02 Nov 2026 06:27:32 AM EST. Package openssl-1:3.5.5-2.0.1.el10_2.x86_64 is already installed. Package which-2.21-44.el10.x86_64 is already installed. Package libselinux-utils-3.10-1.el10.x86_64 is already installed. Package perl-Data-Dumper-2.189-512.el10.x86_64 is already installed. Package bzip2-1.0.8-25.el10.x86_64 is already installed. Package efibootmgr-18-8.0.1.el10.x86_64 is already installed. Package mokutil-2:0.7.2-4.el10.x86_64 is already installed. Package policycoreutils-python-utils-3.10-1.el10.noarch is already installed. Package python3-3.12.13-2.0.1.el10_2.x86_64 is already installed. Dependencies resolved. ============================================================================================================================================================= Package Architecture Version Repository Size ============================================================================================================================================================= Installing: elfutils-libelf-devel x86_64 0.194-2.el10_2 ol10_appstream_netapp 140 k gcc x86_64 14.3.1-4.4.0.1.el10 ol10_appstream_netapp 38 M kernel-uek-devel x86_64 6.12.0-204.92.4.2.el10uek ol10_uek8_netapp 47 M make x86_64 1:4.4.1-9.el10 ol10_baseos_netapp 620 k openssl-devel x86_64 1:3.5.8-2.0.1.el10_2 ol10_appstream_netapp 3.7 M patch x86_64 2.7.6-26.el10 ol10_appstream_netapp 133 k perl-ExtUtils-MakeMaker noarch 2:7.70-513.el10 ol10_appstream_netapp 344 k python3-devel x86_64 3.12.15-1.0.1.el10_2 ol10_appstream_netapp 521 k python3-pip noarch 23.3.2-11.el10_2 ol10_appstream_netapp 4.4 M Upgrading: openssl x86_64 1:3.5.8-2.0.1.el10_2 ol10_baseos_netapp 1.4 M openssl-libs x86_64 1:3.5.8-2.0.1.el10_2 ol10_baseos_netapp 2.3 M policycoreutils x86_64 3.10-2.el10_2 ol10_baseos_netapp 568 k policycoreutils-python-utils noarch 3.10-2.el10_2 ol10_appstream_netapp 250 k python-unversioned-command noarch 3.12.15-1.0.1.el10_2 ol10_appstream_netapp 15 k python3 x86_64 3.12.15-1.0.1.el10_2 ol10_baseos_netapp 37 k python3-libs x86_64 3.12.15-1.0.1.el10_2 ol10_baseos_netapp 11 M python3-policycoreutils noarch 3.10-2.el10_2 ol10_appstream_netapp 2.6 M which x86_64 2.21-44.el10_0 ol10_baseos_netapp 62 k Installing dependencies: annobin-docs noarch 13.02-2.el10 ol10_appstream_netapp 147 k annobin-plugin-gcc x86_64 13.02-2.el10 ol10_appstream_netapp 1.0 M binutils x86_64 2.41-63.0.1.el10 ol10_baseos_netapp 6.7 M binutils-devel x86_64 2.41-63.0.1.el10 ol10_appstream_netapp 8.8 M binutils-gold x86_64 2.41-63.0.1.el10 ol10_baseos_netapp 908 k cmake-filesystem x86_64 3.31.8-1.el10 ol10_appstream_netapp 57 k cpp x86_64 14.3.1-4.4.0.1.el10 ol10_appstream_netapp 13 M dwz x86_64 0.16-1.el10 ol10_appstream_netapp 150 k efi-srpm-macros noarch 6-6.0.1.el10 ol10_appstream_netapp 27 k fonts-srpm-macros noarch 1:2.0.5-18.el10 ol10_appstream_netapp 31 k forge-srpm-macros noarch 0.4.0-6.el10 ol10_appstream_netapp 26 k gcc-c++ x86_64 14.3.1-4.4.0.1.el10 ol10_appstream_netapp 15 M gcc-plugin-annobin x86_64 14.3.1-4.4.0.1.el10 ol10_appstream_netapp 70 k glibc-devel x86_64 2.39-121.0.1.el10_2 ol10_appstream_netapp 1.1 M go-srpm-macros noarch 3.8.0-1.el10 ol10_appstream_netapp 34 k kernel-headers x86_64 6.12.0-211.69.1.el10_2 ol10_appstream_netapp 4.4 M kernel-srpm-macros noarch 1.0-27.0.1.el10 ol10_appstream_netapp 12 k libstdc++-devel x86_64 14.3.1-4.4.0.1.el10 ol10_appstream_netapp 3.5 M libxcrypt-devel x86_64 4.4.36-10.el10 ol10_appstream_netapp 42 k libzstd-devel x86_64 1.5.5-9.el10 ol10_appstream_netapp 55 k lua-srpm-macros noarch 1-15.el10 ol10_appstream_netapp 8.7 k ocaml-srpm-macros noarch 10-4.el10 ol10_appstream_netapp 9.0 k openblas-srpm-macros noarch 2-19.el10 ol10_appstream_netapp 7.6 k package-notes-srpm-macros noarch 0.5-13.el10 ol10_appstream_netapp 9.1 k perl-AutoSplit noarch 5.74-515.el10_2 ol10_appstream_netapp 103 k perl-Benchmark noarch 1.25-515.el10_2 ol10_appstream_netapp 108 k perl-CPAN-Meta-Requirements noarch 2.143-11.el10 ol10_appstream_netapp 43 k perl-CPAN-Meta-YAML noarch 0.018-512.el10 ol10_appstream_netapp 31 k perl-Devel-PPPort x86_64 3.72-512.el10 ol10_appstream_netapp 227 k perl-ExtUtils-Command noarch 2:7.70-513.el10 ol10_appstream_netapp 14 k perl-ExtUtils-Constant noarch 0.25-515.el10_2 ol10_appstream_netapp 134 k perl-ExtUtils-Install noarch 2.22-511.el10 ol10_appstream_netapp 51 k perl-ExtUtils-Manifest noarch 1:1.75-511.el10 ol10_appstream_netapp 40 k perl-ExtUtils-ParseXS noarch 1:3.51-512.el10 ol10_appstream_netapp 211 k perl-File-Compare noarch 1.100.800-515.el10_2 ol10_appstream_netapp 94 k perl-File-Copy noarch 2.41-515.el10_2 ol10_appstream_netapp 101 k perl-I18N-Langinfo x86_64 0.24-515.el10_2 ol10_appstream_netapp 107 k perl-JSON-PP noarch 1:4.16-513.el10 ol10_appstream_netapp 86 k perl-Test-Harness noarch 1:3.48-512.el10 ol10_appstream_netapp 375 k perl-lib x86_64 0.65-515.el10_2 ol10_appstream_netapp 96 k perl-srpm-macros noarch 1-57.el10 ol10_appstream_netapp 8.4 k perl-version x86_64 8:0.99.32-4.el10 ol10_appstream_netapp 74 k pyproject-srpm-macros noarch 1.18.5-1.el10 ol10_appstream_netapp 26 k python-srpm-macros noarch 3.12-11.el10 ol10_appstream_netapp 47 k qt6-srpm-macros noarch 6.10.1-1.el10 ol10_appstream_netapp 12 k redhat-rpm-config noarch 295-1.0.1.el10 ol10_appstream_netapp 155 k rust-toolset-srpm-macros noarch 1.92.0-2.el10_2 ol10_appstream_netapp 27 k systemtap-sdt-devel x86_64 5.4-3.0.1.el10 ol10_appstream_netapp 85 k systemtap-sdt-dtrace x86_64 5.4-3.0.1.el10 ol10_appstream_netapp 84 k zlib-ng-compat-devel x86_64 2.2.3-3.el10_1 ol10_appstream_netapp 45 k Installing weak dependencies: perl-CPAN-Meta noarch 2.150010-511.el10 ol10_appstream_netapp 288 k perl-Encode-Locale noarch 1.05-31.el10 ol10_appstream_netapp 22 k perl-Time-HiRes x86_64 4:1.9777-511.el10 ol10_appstream_netapp 64 k perl-devel x86_64 4:5.40.2-512.2.el10_0 ol10_appstream_netapp 925 k perl-doc noarch 5.40.2-512.2.el10_0 ol10_appstream_netapp 5.3 M Transaction Summary ============================================================================================================================================================= Install 64 Packages Upgrade 9 Packages Total download size: 177 M Is this ok [y/N]: y Downloading Packages: (1/73): make-4.4.1-9.el10.x86_64.rpm 3.4 MB/s | 620 kB 00:00 (2/73): binutils-gold-2.41-63.0.1.el10.x86_64.rpm 4.3 MB/s | 908 kB 00:00 (3/73): annobin-docs-13.02-2.el10.noarch.rpm 2.2 MB/s | 147 kB 00:00 (4/73): annobin-plugin-gcc-13.02-2.el10.x86_64.rpm 5.8 MB/s | 1.0 MB 00:00 (5/73): cmake-filesystem-3.31.8-1.el10.x86_64.rpm 862 kB/s | 57 kB 00:00 (6/73): binutils-2.41-63.0.1.el10.x86_64.rpm 11 MB/s | 6.7 MB 00:00 (7/73): dwz-0.16-1.el10.x86_64.rpm 937 kB/s | 150 kB 00:00 (8/73): binutils-devel-2.41-63.0.1.el10.x86_64.rpm 14 MB/s | 8.8 MB 00:00 (9/73): efi-srpm-macros-6-6.0.1.el10.noarch.rpm 221 kB/s | 27 kB 00:00 (10/73): elfutils-libelf-devel-0.194-2.el10_2.x86_64.rpm 1.9 MB/s | 140 kB 00:00 (11/73): fonts-srpm-macros-2.0.5-18.el10.noarch.rpm 402 kB/s | 31 kB 00:00 (12/73): cpp-14.3.1-4.4.0.1.el10.x86_64.rpm 21 MB/s | 13 MB 00:00 (13/73): forge-srpm-macros-0.4.0-6.el10.noarch.rpm 234 kB/s | 26 kB 00:00 (14/73): gcc-plugin-annobin-14.3.1-4.4.0.1.el10.x86_64.rpm 1.2 MB/s | 70 kB 00:00 (15/73): glibc-devel-2.39-121.0.1.el10_2.x86_64.rpm 6.0 MB/s | 1.1 MB 00:00 (16/73): go-srpm-macros-3.8.0-1.el10.noarch.rpm 701 kB/s | 34 kB 00:00 (17/73): gcc-c++-14.3.1-4.4.0.1.el10.x86_64.rpm 21 MB/s | 15 MB 00:00 (18/73): kernel-srpm-macros-1.0-27.0.1.el10.noarch.rpm 419 kB/s | 12 kB 00:00 (19/73): libstdc++-devel-14.3.1-4.4.0.1.el10.x86_64.rpm 19 MB/s | 3.5 MB 00:00 (20/73): gcc-14.3.1-4.4.0.1.el10.x86_64.rpm 29 MB/s | 38 MB 00:01 (21/73): libxcrypt-devel-4.4.36-10.el10.x86_64.rpm 145 kB/s | 42 kB 00:00 (22/73): lua-srpm-macros-1-15.el10.noarch.rpm 277 kB/s | 8.7 kB 00:00 (23/73): libzstd-devel-1.5.5-9.el10.x86_64.rpm 824 kB/s | 55 kB 00:00 (24/73): ocaml-srpm-macros-10-4.el10.noarch.rpm 194 kB/s | 9.0 kB 00:00 (25/73): openblas-srpm-macros-2-19.el10.noarch.rpm 68 kB/s | 7.6 kB 00:00 (26/73): package-notes-srpm-macros-0.5-13.el10.noarch.rpm 102 kB/s | 9.1 kB 00:00 (27/73): openssl-devel-3.5.8-2.0.1.el10_2.x86_64.rpm 14 MB/s | 3.7 MB 00:00 (28/73): patch-2.7.6-26.el10.x86_64.rpm 1.3 MB/s | 133 kB 00:00 (29/73): perl-AutoSplit-5.74-515.el10_2.noarch.rpm 1.6 MB/s | 103 kB 00:00 (30/73): perl-Benchmark-1.25-515.el10_2.noarch.rpm 1.5 MB/s | 108 kB 00:00 (31/73): perl-CPAN-Meta-2.150010-511.el10.noarch.rpm 4.0 MB/s | 288 kB 00:00 (32/73): perl-CPAN-Meta-YAML-0.018-512.el10.noarch.rpm 759 kB/s | 31 kB 00:00 (33/73): perl-CPAN-Meta-Requirements-2.143-11.el10.noarch.rpm 471 kB/s | 43 kB 00:00 (34/73): perl-Devel-PPPort-3.72-512.el10.x86_64.rpm 3.0 MB/s | 227 kB 00:00 (35/73): perl-Encode-Locale-1.05-31.el10.noarch.rpm 195 kB/s | 22 kB 00:00 (36/73): perl-ExtUtils-Command-7.70-513.el10.noarch.rpm 201 kB/s | 14 kB 00:00 (37/73): perl-ExtUtils-Constant-0.25-515.el10_2.noarch.rpm 1.8 MB/s | 134 kB 00:00 (38/73): perl-ExtUtils-Install-2.22-511.el10.noarch.rpm 971 kB/s | 51 kB 00:00 (39/73): perl-ExtUtils-Manifest-1.75-511.el10.noarch.rpm 893 kB/s | 40 kB 00:00 (40/73): perl-ExtUtils-MakeMaker-7.70-513.el10.noarch.rpm 3.9 MB/s | 344 kB 00:00 (41/73): perl-ExtUtils-ParseXS-3.51-512.el10.noarch.rpm 4.0 MB/s | 211 kB 00:00 (42/73): perl-File-Compare-1.100.800-515.el10_2.noarch.rpm 1.7 MB/s | 94 kB 00:00 (43/73): perl-File-Copy-2.41-515.el10_2.noarch.rpm 1.0 MB/s | 101 kB 00:00 (44/73): perl-I18N-Langinfo-0.24-515.el10_2.x86_64.rpm 1.3 MB/s | 107 kB 00:00 (45/73): perl-JSON-PP-4.16-513.el10.noarch.rpm 1.1 MB/s | 86 kB 00:00 (46/73): perl-Test-Harness-3.48-512.el10.noarch.rpm 4.6 MB/s | 375 kB 00:00 (47/73): perl-Time-HiRes-1.9777-511.el10.x86_64.rpm 758 kB/s | 64 kB 00:00 (48/73): perl-devel-5.40.2-512.2.el10_0.x86_64.rpm 6.0 MB/s | 925 kB 00:00 (49/73): perl-lib-0.65-515.el10_2.x86_64.rpm 1.1 MB/s | 96 kB 00:00 (50/73): perl-srpm-macros-1-57.el10.noarch.rpm 178 kB/s | 8.4 kB 00:00 (51/73): perl-doc-5.40.2-512.2.el10_0.noarch.rpm 14 MB/s | 5.3 MB 00:00 (52/73): perl-version-0.99.32-4.el10.x86_64.rpm 478 kB/s | 74 kB 00:00 (53/73): pyproject-srpm-macros-1.18.5-1.el10.noarch.rpm 446 kB/s | 26 kB 00:00 (54/73): python-srpm-macros-3.12-11.el10.noarch.rpm 616 kB/s | 47 kB 00:00 (55/73): python3-devel-3.12.15-1.0.1.el10_2.x86_64.rpm 4.3 MB/s | 521 kB 00:00 (56/73): qt6-srpm-macros-6.10.1-1.el10.noarch.rpm 256 kB/s | 12 kB 00:00 (57/73): redhat-rpm-config-295-1.0.1.el10.noarch.rpm 1.9 MB/s | 155 kB 00:00 (58/73): python3-pip-23.3.2-11.el10_2.noarch.rpm 13 MB/s | 4.4 MB 00:00 (59/73): rust-toolset-srpm-macros-1.92.0-2.el10_2.noarch.rpm 247 kB/s | 27 kB 00:00 (60/73): systemtap-sdt-dtrace-5.4-3.0.1.el10.x86_64.rpm 1.0 MB/s | 84 kB 00:00 (61/73): systemtap-sdt-devel-5.4-3.0.1.el10.x86_64.rpm 704 kB/s | 85 kB 00:00 (62/73): zlib-ng-compat-devel-2.2.3-3.el10_1.x86_64.rpm 448 kB/s | 45 kB 00:00 (63/73): openssl-3.5.8-2.0.1.el10_2.x86_64.rpm 9.0 MB/s | 1.4 MB 00:00 (64/73): openssl-libs-3.5.8-2.0.1.el10_2.x86_64.rpm 7.9 MB/s | 2.3 MB 00:00 (65/73): policycoreutils-3.10-2.el10_2.x86_64.rpm 3.8 MB/s | 568 kB 00:00 (66/73): python3-3.12.15-1.0.1.el10_2.x86_64.rpm 352 kB/s | 37 kB 00:00 (67/73): kernel-uek-devel-6.12.0-204.92.4.2.el10uek.x86_64.rpm 33 MB/s | 47 MB 00:01 (68/73): kernel-headers-6.12.0-211.69.1.el10_2.x86_64.rpm 1.0 MB/s | 4.4 MB 00:04 (69/73): which-2.21-44.el10_0.x86_64.rpm 814 kB/s | 62 kB 00:00 (70/73): python3-libs-3.12.15-1.0.1.el10_2.x86_64.rpm 13 MB/s | 11 MB 00:00 (71/73): python-unversioned-command-3.12.15-1.0.1.el10_2.noarch.rpm 113 kB/s | 15 kB 00:00 (72/73): policycoreutils-python-utils-3.10-2.el10_2.noarch.rpm 1.7 MB/s | 250 kB 00:00 (73/73): python3-policycoreutils-3.10-2.el10_2.noarch.rpm 11 MB/s | 2.6 MB 00:00 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Total 28 MB/s | 177 MB 00:06 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : binutils-gold-2.41-63.0.1.el10.x86_64 1/82 Running scriptlet: binutils-gold-2.41-63.0.1.el10.x86_64 1/82 Installing : binutils-2.41-63.0.1.el10.x86_64 2/82 Running scriptlet: binutils-2.41-63.0.1.el10.x86_64 2/82 Upgrading : openssl-libs-1:3.5.8-2.0.1.el10_2.x86_64 3/82 Installing : perl-version-8:0.99.32-4.el10.x86_64 4/82 Installing : perl-File-Copy-2.41-515.el10_2.noarch 5/82 Installing : perl-CPAN-Meta-Requirements-2.143-11.el10.noarch 6/82 Upgrading : python-unversioned-command-3.12.15-1.0.1.el10_2.noarch 7/82 Upgrading : python3-3.12.15-1.0.1.el10_2.x86_64 8/82 Upgrading : python3-libs-3.12.15-1.0.1.el10_2.x86_64 9/82 Installing : systemtap-sdt-dtrace-5.4-3.0.1.el10.x86_64 10/82 Installing : perl-Time-HiRes-4:1.9777-511.el10.x86_64 11/82 Installing : perl-JSON-PP-1:4.16-513.el10.noarch 12/82 Installing : perl-File-Compare-1.100.800-515.el10_2.noarch 13/82 Installing : perl-ExtUtils-ParseXS-1:3.51-512.el10.noarch 14/82 Installing : systemtap-sdt-devel-5.4-3.0.1.el10.x86_64 15/82 Installing : python3-pip-23.3.2-11.el10_2.noarch 16/82 Installing : perl-ExtUtils-Command-2:7.70-513.el10.noarch 17/82 Installing : perl-ExtUtils-Manifest-1:1.75-511.el10.noarch 18/82 Upgrading : policycoreutils-3.10-2.el10_2.x86_64 19/82 Running scriptlet: policycoreutils-3.10-2.el10_2.x86_64 19/82 Upgrading : python3-policycoreutils-3.10-2.el10_2.noarch 20/82 Installing : rust-toolset-srpm-macros-1.92.0-2.el10_2.noarch 21/82 Installing : qt6-srpm-macros-6.10.1-1.el10.noarch 22/82 Installing : pyproject-srpm-macros-1.18.5-1.el10.noarch 23/82 Installing : perl-srpm-macros-1-57.el10.noarch 24/82 Installing : perl-lib-0.65-515.el10_2.x86_64 25/82 Installing : perl-doc-5.40.2-512.2.el10_0.noarch 26/82 Installing : perl-I18N-Langinfo-0.24-515.el10_2.x86_64 27/82 Installing : perl-Encode-Locale-1.05-31.el10.noarch 28/82 Installing : perl-ExtUtils-Constant-0.25-515.el10_2.noarch 29/82 Installing : perl-Devel-PPPort-3.72-512.el10.x86_64 30/82 Installing : perl-CPAN-Meta-YAML-0.018-512.el10.noarch 31/82 Installing : perl-CPAN-Meta-2.150010-511.el10.noarch 32/82 Installing : perl-Benchmark-1.25-515.el10_2.noarch 33/82 Installing : perl-Test-Harness-1:3.48-512.el10.noarch 34/82 Installing : perl-AutoSplit-5.74-515.el10_2.noarch 35/82 Installing : package-notes-srpm-macros-0.5-13.el10.noarch 36/82 Installing : openblas-srpm-macros-2-19.el10.noarch 37/82 Installing : ocaml-srpm-macros-10-4.el10.noarch 38/82 Installing : lua-srpm-macros-1-15.el10.noarch 39/82 Installing : libzstd-devel-1.5.5-9.el10.x86_64 40/82 Installing : libstdc++-devel-14.3.1-4.4.0.1.el10.x86_64 41/82 Installing : kernel-srpm-macros-1.0-27.0.1.el10.noarch 42/82 Installing : kernel-headers-6.12.0-211.69.1.el10_2.x86_64 43/82 Installing : libxcrypt-devel-4.4.36-10.el10.x86_64 44/82 Installing : glibc-devel-2.39-121.0.1.el10_2.x86_64 45/82 Installing : efi-srpm-macros-6-6.0.1.el10.noarch 46/82 Installing : dwz-0.16-1.el10.x86_64 47/82 Installing : cpp-14.3.1-4.4.0.1.el10.x86_64 48/82 Installing : cmake-filesystem-3.31.8-1.el10.x86_64 49/82 Installing : zlib-ng-compat-devel-2.2.3-3.el10_1.x86_64 50/82 Installing : binutils-devel-2.41-63.0.1.el10.x86_64 51/82 Installing : annobin-docs-13.02-2.el10.noarch 52/82 Installing : make-1:4.4.1-9.el10.x86_64 53/82 Installing : gcc-14.3.1-4.4.0.1.el10.x86_64 54/82 Installing : annobin-plugin-gcc-13.02-2.el10.x86_64 55/82 Installing : gcc-c++-14.3.1-4.4.0.1.el10.x86_64 56/82 Installing : gcc-plugin-annobin-14.3.1-4.4.0.1.el10.x86_64 57/82 Installing : fonts-srpm-macros-1:2.0.5-18.el10.noarch 58/82 Installing : forge-srpm-macros-0.4.0-6.el10.noarch 59/82 Installing : go-srpm-macros-3.8.0-1.el10.noarch 60/82 Installing : python-srpm-macros-3.12-11.el10.noarch 61/82 Installing : redhat-rpm-config-295-1.0.1.el10.noarch 62/82 Running scriptlet: redhat-rpm-config-295-1.0.1.el10.noarch 62/82 Installing : perl-devel-4:5.40.2-512.2.el10_0.x86_64 63/82 Installing : perl-ExtUtils-Install-2.22-511.el10.noarch 64/82 Installing : perl-ExtUtils-MakeMaker-2:7.70-513.el10.noarch 65/82 Installing : kernel-uek-devel-6.12.0-204.92.4.2.el10uek.x86_64 66/82 Running scriptlet: kernel-uek-devel-6.12.0-204.92.4.2.el10uek.x86_64 66/82 Installing : elfutils-libelf-devel-0.194-2.el10_2.x86_64 67/82 Upgrading : policycoreutils-python-utils-3.10-2.el10_2.noarch 68/82 Installing : python3-devel-3.12.15-1.0.1.el10_2.x86_64 69/82 Installing : openssl-devel-1:3.5.8-2.0.1.el10_2.x86_64 70/82 Upgrading : openssl-1:3.5.8-2.0.1.el10_2.x86_64 71/82 Upgrading : which-2.21-44.el10_0.x86_64 72/82 Installing : patch-2.7.6-26.el10.x86_64 73/82 Cleanup : openssl-1:3.5.5-2.0.1.el10_2.x86_64 74/82 Cleanup : policycoreutils-python-utils-3.10-1.el10.noarch 75/82 Cleanup : python3-policycoreutils-3.10-1.el10.noarch 76/82 Cleanup : python3-3.12.13-2.0.1.el10_2.x86_64 77/82 Cleanup : python-unversioned-command-3.12.13-2.0.1.el10_2.noarch 78/82 Cleanup : python3-libs-3.12.13-2.0.1.el10_2.x86_64 79/82 Cleanup : openssl-libs-1:3.5.5-2.0.1.el10_2.x86_64 80/82 Running scriptlet: policycoreutils-3.10-1.el10.x86_64 81/82 Cleanup : policycoreutils-3.10-1.el10.x86_64 81/82 Cleanup : which-2.21-44.el10.x86_64 82/82 Running scriptlet: which-2.21-44.el10.x86_64 82/82 Upgraded: openssl-1:3.5.8-2.0.1.el10_2.x86_64 openssl-libs-1:3.5.8-2.0.1.el10_2.x86_64 policycoreutils-3.10-2.el10_2.x86_64 policycoreutils-python-utils-3.10-2.el10_2.noarch python-unversioned-command-3.12.15-1.0.1.el10_2.noarch python3-3.12.15-1.0.1.el10_2.x86_64 python3-libs-3.12.15-1.0.1.el10_2.x86_64 python3-policycoreutils-3.10-2.el10_2.noarch which-2.21-44.el10_0.x86_64 Installed: annobin-docs-13.02-2.el10.noarch annobin-plugin-gcc-13.02-2.el10.x86_64 binutils-2.41-63.0.1.el10.x86_64 binutils-devel-2.41-63.0.1.el10.x86_64 binutils-gold-2.41-63.0.1.el10.x86_64 cmake-filesystem-3.31.8-1.el10.x86_64 cpp-14.3.1-4.4.0.1.el10.x86_64 dwz-0.16-1.el10.x86_64 efi-srpm-macros-6-6.0.1.el10.noarch elfutils-libelf-devel-0.194-2.el10_2.x86_64 fonts-srpm-macros-1:2.0.5-18.el10.noarch forge-srpm-macros-0.4.0-6.el10.noarch gcc-14.3.1-4.4.0.1.el10.x86_64 gcc-c++-14.3.1-4.4.0.1.el10.x86_64 gcc-plugin-annobin-14.3.1-4.4.0.1.el10.x86_64 glibc-devel-2.39-121.0.1.el10_2.x86_64 go-srpm-macros-3.8.0-1.el10.noarch kernel-headers-6.12.0-211.69.1.el10_2.x86_64 kernel-srpm-macros-1.0-27.0.1.el10.noarch kernel-uek-devel-6.12.0-204.92.4.2.el10uek.x86_64 libstdc++-devel-14.3.1-4.4.0.1.el10.x86_64 libxcrypt-devel-4.4.36-10.el10.x86_64 libzstd-devel-1.5.5-9.el10.x86_64 lua-srpm-macros-1-15.el10.noarch make-1:4.4.1-9.el10.x86_64 ocaml-srpm-macros-10-4.el10.noarch openblas-srpm-macros-2-19.el10.noarch openssl-devel-1:3.5.8-2.0.1.el10_2.x86_64 package-notes-srpm-macros-0.5-13.el10.noarch patch-2.7.6-26.el10.x86_64 perl-AutoSplit-5.74-515.el10_2.noarch perl-Benchmark-1.25-515.el10_2.noarch perl-CPAN-Meta-2.150010-511.el10.noarch perl-CPAN-Meta-Requirements-2.143-11.el10.noarch perl-CPAN-Meta-YAML-0.018-512.el10.noarch perl-Devel-PPPort-3.72-512.el10.x86_64 perl-Encode-Locale-1.05-31.el10.noarch perl-ExtUtils-Command-2:7.70-513.el10.noarch perl-ExtUtils-Constant-0.25-515.el10_2.noarch perl-ExtUtils-Install-2.22-511.el10.noarch perl-ExtUtils-MakeMaker-2:7.70-513.el10.noarch perl-ExtUtils-Manifest-1:1.75-511.el10.noarch perl-ExtUtils-ParseXS-1:3.51-512.el10.noarch perl-File-Compare-1.100.800-515.el10_2.noarch perl-File-Copy-2.41-515.el10_2.noarch perl-I18N-Langinfo-0.24-515.el10_2.x86_64 perl-JSON-PP-1:4.16-513.el10.noarch perl-Test-Harness-1:3.48-512.el10.noarch perl-Time-HiRes-4:1.9777-511.el10.x86_64 perl-devel-4:5.40.2-512.2.el10_0.x86_64 perl-doc-5.40.2-512.2.el10_0.noarch perl-lib-0.65-515.el10_2.x86_64 perl-srpm-macros-1-57.el10.noarch perl-version-8:0.99.32-4.el10.x86_64 pyproject-srpm-macros-1.18.5-1.el10.noarch python-srpm-macros-3.12-11.el10.noarch python3-devel-3.12.15-1.0.1.el10_2.x86_64 python3-pip-23.3.2-11.el10_2.noarch qt6-srpm-macros-6.10.1-1.el10.noarch redhat-rpm-config-295-1.0.1.el10.noarch rust-toolset-srpm-macros-1.92.0-2.el10_2.noarch systemtap-sdt-devel-5.4-3.0.1.el10.x86_64 systemtap-sdt-dtrace-5.4-3.0.1.el10.x86_64 zlib-ng-compat-devel-2.2.3-3.el10_1.x86_64 Complete! OS package installations finished + Installing ONTAP Mediator. (Log: /root/ontap_mediator.26mL7P/ontap-mediator-1.13.0/ontap-mediator-1.13.0/install_20261102063122.log) This step will take several minutes. Use the log file to view progress. Sudoer config verified ONTAP Mediator rsyslog and logging rotation enabled + Install successful. (Moving log to /opt/netapp/lib/ontap_mediator/log/install_20261102063122.log) + WARNING: This system supports UEFI Secure Boot (SB) is currently enabled on this system. The following action need be taken: Using the keys in /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys follow instructions in /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/README.module-signing to sign the SCST kernel module. Note that reboot will be needed. SCST will not start automatically when Secure Boot is enabled and not configured properly. + Note: ONTAP Mediator generated a self-signed server certificate for temporary use on this host. If the DNS name or IP address for the host is changed, the certificate will no longer be valid. The default certificates should be replaced with secure trusted certificates signed by a known certificate authority prior to use for production. For more information, see /opt/netapp/lib/ontap_mediator/README + Note: ONTAP Mediator uses a kernel module compiled specifically for the current OS. Using 'yum update' to upgrade the kernel might cause service interruption. For more information, see /opt/netapp/lib/ontap_mediator/README [root@mediator-host ~]#Esempio di installazione di ONTAP Mediator con supporto solo per HTTPS (output della console)
[root@localhost ~]# ontap-mediator-1.13.0/ontap-mediator-1.13.0 --https-only ONTAP Mediator: Self Extracting Installer + Extracting the ONTAP Mediator installation/upgrade archive + Performing the ONTAP Mediator run-time code signature check Using openssl from the path: /usr/bin/openssl configured for CApath:/etc/pki/tls Error querying OCSP responder 4097E2673F7F0000:error:10080002:BIO routines:BIO_lookup_ex:system lib:crypto/bio/bio_addr.c:767:Name or service not known WARNING: The OCSP check failed while attempting to test the Code-Signature-Check certificate Continue without code signature checking (only recommended if integrity has been established manually)? y(es)/N(o): yes SKIPPING: Code signature check, manual override due to lack of OCSP response + Unpacking the ONTAP Mediator installer + ONTAP_MEDIATOR_INSTALL_HTTPS_ONLY is set to '1', args are: '' + Starting ONTAP Mediator install/update process: previous installation_mode is '' + Selected install package mode: HTTPS_ONLY + Checking that required port 31784 is free ONTAP Mediator requires two user accounts. One for the service (netapp), and one for use by ONTAP to the mediator API (mediatoradmin). Would you like to use the default account names: netapp + mediatoradmin? (Y(es)/n(o)): yes Enter ONTAP Mediator user account (mediatoradmin) password: Re-Enter ONTAP Mediator user account (mediatoradmin) password: + Checking if SELinux is in enforcing mode SELinux is set to Enforcing. ONTAP Mediator server requires modifying the SELinux context of the file /opt/netapp/lib/ontap_mediator/pyenv/bin/uwsgi from type 'lib_t' to 'bin_t'. This is neccessary to start the ONTAP Mediator service while SELinux is set to Enforcing. Allow SELinux context change? Y(es)/n(o): yes The installer will change the SELinux context type of /opt/netapp/lib/ontap_mediator/pyenv/bin/uwsgi from type 'lib_t' to 'bin_t'. + Checking for default Linux firewall + Installing required packages. Updating Subscription Management repositories. Unable to read consumer identity This system is not registered with an entitlement server. You can use "rhc" or "subscription-manager" to register. Last metadata expiration check: 1:00:07 ago on Fri 16 Oct 2026 01:18:47 AM EDT. Package openssl-1:3.5.8-2.el9_8.x86_64 is already installed. Package openssl-devel-1:3.5.8-2.el9_8.x86_64 is already installed. Package gcc-11.5.0-15.el9.x86_64 is already installed. Package make-1:4.3-8.el9.x86_64 is already installed. Package which-2.21-30.el9.x86_64 is already installed. Package libselinux-utils-3.6-4.el9.x86_64 is already installed. Package patch-2.7.6-16.el9.x86_64 is already installed. Package perl-Data-Dumper-2.174-462.el9.x86_64 is already installed. Package perl-ExtUtils-MakeMaker-2:7.60-3.el9.noarch is already installed. Package bzip2-1.0.8-11.el9.x86_64 is already installed. Package efibootmgr-16-12.el9.x86_64 is already installed. Package mokutil-2:0.7.2-6.el9_9.x86_64 is already installed. Package python3-pip-21.3.1-2.el9_8.noarch is already installed. Package elfutils-libelf-devel-0.195-1.el9.x86_64 is already installed. Package policycoreutils-python-utils-3.6-9.el9.noarch is already installed. Package python3.12-3.12.15-1.el9_8.x86_64 is already installed. Package python3.12-devel-3.12.15-1.el9_8.x86_64 is already installed. Dependencies resolved. Nothing to do. Complete! OS package installations finished + Installing ONTAP Mediator. (Log: /root/ontap_mediator.aq18RI/ontap-mediator-1.13.0/ontap-mediator-1.13.0/install_20261016021831.log) This step will take several minutes. Use the log file to view progress. Sudoer config verified ONTAP Mediator rsyslog and logging rotation enabled + Install successful. (Moving log to /opt/netapp/lib/ontap_mediator/log/install_20261016021831.log) + WARNING: This system supports UEFI + Note: Not signing the SCST modules since they were not installed by this installation. + Note: SCST will not start automatically if Secure Boot is enabled and not configured properly. + Note: ONTAP Mediator generated a self-signed server certificate for temporary use on this host. If the DNS name or IP address for the host is changed, the certificate will no longer be valid. The default certificates should be replaced with secure trusted certificates signed by a known certificate authority prior to use for production. For more information, see /opt/netapp/lib/ontap_mediator/README [root@localhost ~]# [root@localhost ~]#
Registra la chiave di sicurezza per UEFI Secure Boot
A partire da ONTAP Mediator 1.4, il meccanismo Secure Boot è abilitato sui sistemi UEFI. Quando Secure Boot è abilitato, devi eseguire ulteriori passaggi per registrare la chiave di sicurezza dopo l'installazione.
|
|
Se hai installato ONTAP Mediator 1.12 o versioni successive con supporto solo per HTTPS, il pacchetto SCST non è installato e puoi saltare questo passaggio. |
-
Segui le istruzioni contenute nel file README per firmare il modulo del kernel SCST:
/opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/README.module-signing -
Individua le chiavi necessarie:
/opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keysAl termine dell'installazione, l'output del sistema fornisce i file README e la posizione della chiave. -
Aggiungi la chiave pubblica all'elenco MOK:
mokutil --import /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/scst_module_key.derPuoi lasciare la chiave privata nella posizione predefinita oppure spostarla in una posizione sicura. Devi mantenere la chiave pubblica nella posizione attuale affinché il Boot Manager possa utilizzarla. Per ulteriori informazioni, consulta il file README.module-signing:
[root@hostname ~]# ls /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/ README.module-signing scst_module_key.der scst_module_key.priv -
Riavvia l'host e usa il gestore di avvio UEFI del tuo dispositivo per approvare il nuovo MOK. Ti servirà la passphrase fornita per l' `mokutil`utilità in "Installa ONTAP Mediator quando l'avvio protetto UEFI è abilitato".
Firma i moduli del kernel SCST
Dopo aver installato ONTAP Mediator, se systemctl status mediator-scst risulta failed (inactive), segui questi passaggi per firmare il modulo kernel SCST.
|
|
Se hai installato ONTAP Mediator 1.12 o versioni successive con supporto solo per HTTPS, il pacchetto SCST non è installato e puoi saltare questo passaggio. |
-
Durante il processo di compilazione, viene generata una coppia di chiavi pubblica/privata nella directory
/opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/. Esegui il seguente comando per visualizzare le chiavi generate:ls /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/README.module-signing scst_module_key.der scst_module_key.priv
-
Avvia il processo di importazione della chiave pubblica nel repository delle chiavi UEFI eseguendo il seguente comando:
mokutil --import /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/scst_module_key.derL' `mokutil`utility ti chiede di inserire la password due volte.
-
Il software mokutil richiede una password temporanea da utilizzare per questa chiave durante il processo di importazione.
-
Verifica se il processo di importazione si è avviato con il seguente comando, quindi riavvia il sistema. Il bootloader avvia il gestore EFI MOK.
mokutil --list-new -
Usa i menu a schermo per attivare la chiave del modulo kernel SCST. Dopo l'avvio, esegui il seguente comando. Una volta avviato il servizio, i moduli kernel SCST vengono firmati.
systemctl status mediator-scst