La versione in lingua italiana fornita proviene da una traduzione automatica. Per eventuali incoerenze, fare riferimento alla versione in lingua inglese.
Generare un messaggio AutoSupport sull'avvio dell'espansione
Collaboratori
Suggerisci modifiche
-
PDF del sito di questa documentazione
- Eseguire il provisioning dello storage NAS
- Eseguire il provisioning dello storage SAN
- Protezione dei dati e disaster recovery
Raccolta di documenti PDF separati
Creating your file...
This may take a few minutes. Thanks for your patience.
Your file is ready
Immediatamente prima di espandere un cluster, è necessario inviare un messaggio AutoSupport per indicare che si sta per avviare il processo di espansione. Il messaggio informa il personale di supporto interno ed esterno dell'espansione e funge da indicatore orario per qualsiasi risoluzione dei problemi che potrebbe essere richiesta in seguito.
Prima di iniziare
AutoSupport deve essere configurato.
Fasi
-
Per ciascun nodo del cluster, inviare un messaggio AutoSupport utilizzando
system node autosupport invoke
comando.cluster1::> system node autosupport invoke -node * -message "cluster expansion started" -type all The AutoSupport was successfully invoked on node "cluster1-1". To view the status of the AutoSupport, use the "system node autosupport history show" command. Note: It may take several minutes for the AutoSupport to appear in the history list. The AutoSupport was successfully invoked on node "cluster1-2". To view the status of the AutoSupport, use the "system node autosupport history show" command. Note: It may take several minutes for the AutoSupport to appear in the history list. 2 entries were acted on.