OnCommand Insight uses the 3PAR InServ (Firmware 2.2.2+, SSH) data source to discover inventory for HP 3PAR StoreServ storage arrays.
OnCommand Insight acquires the following inventory information from the 3PAR InServ data source. For each asset type acquired by Insight, the most common terminology used for this asset is shown. When viewing or troubleshooting this data source, keep the following terminology in mind:
Vendor/Model Term | Insight Term |
---|---|
Physical Disk | Disk |
Storage System | Storage |
Controller Node | Storage Node |
Common Provisioning Group | Storage Pool |
Virtual Volume | Volume |
Field | Description |
---|---|
Cluster IP | IP address or fully-qualified domain name of the InServ cluster |
User Name | User name for the InServ Server |
Password | Password used for the InServ Server |
SMI-S Host IP | IP address of the SMI-S Provider Host |
SMI-S User Name | User name for the SMI-S Provider Host |
SMI-S Password | Password used for the SMI-S Provider Host |
Field | Description |
---|---|
Inventory Poll Interval (min) | Interval between inventory polls (default 40 minutes) |
Exclude Devices | Comma-separated list of device IPs to exclude |
SSH Process Wait Timeout (sec) | SSH process timeout (default 60 seconds) |
Number of SSH Retries | Number of SSH retry attempts |
SSH Banner Wait Timeout (sec) | SSH banner wait timeout (default 20 seconds) |
SMI-S Port | Port used by SMI-S Provider Host |
Protocol | Protocol used to connect to the SMI-S provider |
SMI-S namespace | SMI-S namespace |
Performance Poll Interval (sec) | Interval between performance polls (default 300 seconds) |
Number of SMI-S Connection Retries | Number of SMI-S connection retry attempts |