Release notes
  Links to the ONTAP Release Notes
  Links to the 7-Mode Transition Tool Release Notes
  Links to the ONTAP Release Notes
  Links to the 7-Mode Transition Tool Release Notes
Introduction and concepts
  ONTAP concepts
    Deciding whether to use this guide
    ONTAP platforms
    Cluster storage
    High-availability pairs
    AutoSupport and Active IQ Digital Advisor
    Network architecture
      Logical ports
      Support for industry-standard network technologies
    Client protocols
    Disks and aggregates
      Aggregates and RAID groups
      Root-data partitioning
    Volumes, qtrees, files, and LUNs
    Storage virtualization
      SVM use cases
      Cluster and SVM administration
      Namespaces and junction points
    Path failover
      NAS path failover
      SAN path failover
    Load balancing
    Replication
      Snapshot copies
      SnapMirror disaster recovery and data transfer
      SnapVault archiving
      Cloud backup and support for traditional backups
      MetroCluster continuous availability
    Storage efficiency
      Thin provisioning
      Deduplication
      Compression
      FlexClone volumes, files, and LUNs
    Security
      Client authentication and authorization
      Administrator authentication and RBAC
      Virus scanning
      Encryption
      WORM storage
    Application aware data management
    Where to find additional information
  ONTAP and the cloud
    Deciding whether to use the ONTAP and the Cloud guide
    Data protection and the cloud
      Data replication
      High availability
      Encryption of data at rest
      Antivirus protection
    Moving entire workloads to the cloud
      Storage protocols
        File sharing with NFS and SMB/CIFS
        iSCSI
      AutoSupport and Active IQ Digital Advisor
      Storage VMs
      FlexGroup volumes
    Performance and efficiency in the cloud
      FabricPool
      Storage Efficiency
    Managing ONTAP in the cloud
      Event and performance monitoring
      Volume management
      Volume move
      ONTAP updates
    Compliance and the cloud
      NetApp Cloud Compliance Service
      Data sovereignty
      SnapLock WORM storage
  ONTAP concepts
    Deciding whether to use this guide
    ONTAP platforms
    Cluster storage
    High-availability pairs
    AutoSupport and Active IQ Digital Advisor
    Network architecture
      Logical ports
      Support for industry-standard network technologies
    Client protocols
    Disks and aggregates
      Aggregates and RAID groups
      Root-data partitioning
    Volumes, qtrees, files, and LUNs
    Storage virtualization
      SVM use cases
      Cluster and SVM administration
      Namespaces and junction points
    Path failover
      NAS path failover
      SAN path failover
    Load balancing
    Replication
      Snapshot copies
      SnapMirror disaster recovery and data transfer
      SnapVault archiving
      Cloud backup and support for traditional backups
      MetroCluster continuous availability
    Storage efficiency
      Thin provisioning
      Deduplication
      Compression
      FlexClone volumes, files, and LUNs
    Security
      Client authentication and authorization
      Administrator authentication and RBAC
      Virus scanning
      Encryption
      WORM storage
    Application aware data management
    Where to find additional information
  ONTAP and the cloud
    Deciding whether to use the ONTAP and the Cloud guide
    Data protection and the cloud
      Data replication
      High availability
      Encryption of data at rest
      Antivirus protection
    Moving entire workloads to the cloud
      Storage protocols
        File sharing with NFS and SMB/CIFS
        iSCSI
      AutoSupport and Active IQ Digital Advisor
      Storage VMs
      FlexGroup volumes
    Performance and efficiency in the cloud
      FabricPool
      Storage Efficiency
    Managing ONTAP in the cloud
      Event and performance monitoring
      Volume management
      Volume move
      ONTAP updates
    Compliance and the cloud
      NetApp Cloud Compliance Service
      Data sovereignty
      SnapLock WORM storage
All SAN array
  All SAN Array software setup
    Supported All SAN Array configurations
    How to set up an ASA
    ASA limitations and restrictions
    Support for persistent ports
    ASA host settings and utilities
    Ways to identify an ASA system
  All SAN Array software setup
    Supported All SAN Array configurations
    How to set up an ASA
    ASA limitations and restrictions
    Support for persistent ports
    ASA host settings and utilities
    Ways to identify an ASA system
Cluster administration
  Cluster expansion express configuration
    Deciding whether to use this guide
    Cluster expansion workflow
      Verifying the cluster is ready for expansion
        Verifying the planned configuration
        Gathering the required network information
        Adding or replacing switches
      Preparing the cluster for expansion
        Adding node-locked licenses
        Verifying the health of the system
        Backing up the cluster configuration
        Generating an AutoSupport message about starting expansion
      Installing the new nodes
        Installing the controllers
        Configuring node-management LIFs
        Upgrading or downgrading the nodes
        Ensuring hardware-level HA is enabled
        Adding nodes to a cluster using System Manager
        Joining nodes to the cluster using the CLI
      Completing the expansion
        Configuring the node details in System Manager
        Configuring AutoSupport on the new nodes
        Configuring the Service Processor network
        Validating the configuration of the expanded cluster
        Generating an AutoSupport message about completing expansion
        Updating LUN paths for the new nodes
    Where to find additional information
  Cluster management using System Manager 9.6 and 9.7
    Understanding System Manager
    Icons used in the application interface
    System Manager window layout
    Window layout customization
    ONTAP System Manager enhancements
    Setting up your cluster environment
      Setting up the cluster by using ONTAP System Manager
        Setting up a cluster by using the template file
        Setting up the cluster manually
          Creating a cluster
          Setting up a network
            Setting up a network when an IP address range is enabled
            Setting up a network when an IP address range is disabled
          Setting up a support page
          Reviewing storage recommendations
          Creating an SVM
      Accessing a cluster by using the ONTAP System Manager browser-based graphic interface
      Configuring System Manager options
      Viewing ONTAP System Manager log files
        How system logging works
      Configuring a cluster by using System Manager
        Accessing a cluster by using the ONTAP System Manager browser-based graphic interface
        Setting up the cluster
          Updating the cluster name
          Changing the cluster password
          Editing DNS configurations
          Creating a cluster management logical interface
          Editing the node name
          Creating a node management logical interface
          Editing AutoSupport settings
          Adding licenses
          Setting the time zone for a cluster
          Monitoring HA pairs
        Setting up the network
          Creating IPspaces
          Creating broadcast domains
          Creating subnets
        Setting up physical storage
          Assigning disks to nodes
          Zeroing spare disks
          Provisioning storage through aggregates
            Provisioning storage by creating an aggregate based on storage recommendations
            Provisioning storage by creating an aggregate manually
            Provisioning storage by creating a Flash Pool aggregate manually
            Provisioning storage by creating a SnapLock aggregate manually
            Provisioning storage by creating a FabricPool-enabled aggregate manually
        Setting up logical storage
          Creating SVMs
            Configuring CIFS and NFS protocols on SVMs
            Configuring iSCSI protocol on SVMs
            Configuring FC protocol and FCoE protocol on SVMs
            Configuring NVMe protocol on SVMs
            Delegating administration to SVM administrators
          Creating FlexVol volumes
          Creating SnapLock volumes
    Setting up SAML authentication
      Enabling SAML authentication
      Disabling SAML authentication
    Setting up peering
      Prerequisites for cluster peering
      Creating intercluster LIFs
      Creating cluster peer relationships
      Creating SVM peers
      What passphrases are
    Managing clusters
      Understanding quorum and epsilon
      Dashboard window
        Monitoring a cluster using the dashboard
      Applications
        Provisioning a basic template
        Storage service definitions
        Adding Microsoft SQL Server over SAN to System Manager
        Application provisioning settings
        Editing an application
        Deleting an application
        Applications window
      Configuration update
        Configuring the administration details of an SVM
        Configuration Updates window
      Service Processors
        Isolating management network traffic
        Assigning IP addresses to Service Processors
        Editing Service Processor settings
        Understanding the Service Processor
        Service Processors window
      Cluster peers
        Generating a peering passphrase
        Modifying the cluster peer passphrase
        Modifying LIFs that are configured for the remote cluster
        Changing the peering encryption status
        Deleting cluster peer relationships
        Cluster Peers window
      High availability
        High Availability window
      Licenses
        Deleting licenses
        License types and entitlement risk
        Licenses window
      Cluster Expansion
        Adding nodes to a cluster
        Configuring the network details of the nodes
      Updating clusters
        Updating clusters in a non MetroCluster configuration
        Updating clusters in a MetroCluster configuration
        Obtaining ONTAP software images
        Updating single-node clusters
        Updating a cluster nondisruptively
        How to update a cluster nondisruptively
        Cluster Update window
      MetroCluster switchover and switchback
        MetroCluster switchover and switchback workflow
        Preparing for switchover and switchback operations
          Renaming the MetroCluster local site (Site A)
        Performing a negotiated switchover
        Performing a unplanned switchover
        Performing a switchback
        MetroCluster Switchover and Switchback Operations window
      Date and time settings of a cluster
        Date and Time window
      SNMP
        Enabling or disabling SNMP
        Editing SNMP information
        Enabling or disabling SNMP traps
        Testing the trap host configuration
        SNMP window
      LDAP
        Viewing the LDAP client configuration
        Using LDAP services
        LDAP window
      Users
        Adding a cluster user account
        Editing a cluster user account
        Changing passwords for cluster user accounts
        Locking or unlocking cluster user accounts
        User accounts (cluster administrators only)
        Roles
        Users window
      Roles
        Adding roles
        Editing roles
        Roles and permissions
        Roles window
    Managing the network
      IPspaces
        Editing IPspaces
        Deleting IPspaces
      Broadcast domains
        Editing broadcast domain settings
        Deleting broadcast domains
      Subnets
        Editing subnet settings
        Deleting subnets
      Network interfaces
        Creating network interfaces
        Editing network interface settings
        Deleting network interfaces
        Migrating a LIF
      Ethernet ports
        Creating interface groups
        Creating VLAN interfaces
        Editing Ethernet port settings
        Editing interface group settings
        Modifying the MTU size of a VLAN
        Deleting VLANs
        Ports and adapters
      FC/FCoE and NVMe adapters
        Editing the FC/FCoE and NVMe adapter speed settings
      Network window
    Managing physical storage
      Storage tiers
        Editing aggregates
        Deleting aggregates
        Changing the RAID configuration when creating an aggregate
        Provisioning cache by adding SSDs
          Provisioning cache to aggregates by adding SSDs
          Increasing the cache for Flash Pool aggregates by adding SSDs
        Adding capacity disks
        Changing the RAID group when adding capacity disks
        Moving FlexVol volumes
        Mirroring aggregates
        Viewing aggregate information
        Installing a CA certificate if you use StorageGRID
        How moving a FlexVol volume works
        How you can use effective ONTAP disk type for mixing HDDs
        What compatible spare disks are
        How System Manager works with hot spares
        Rules for displaying disk types and disk RPM
        How mirrored aggregates work
        What a FabricPool is
        Storage recommendations for creating aggregates
        Storage Tiers window
      Configuring and managing cloud tiers
        Adding a cloud tier
        Attaching an aggregate to a cloud tier
        Provisioning storage by creating a FabricPool-enabled aggregate manually
        Changing the tiering policy of a volume
        Editing a cloud tier
        Deleting a cloud tier
        What cloud tiers and tiering policies are
        What inactive (cold) data is
        Cloud Tier window
      Aggregates
        Aggregates window
      Storage pools
        Creating a storage pool
        Adding disks to a storage pool
        Deleting storage pools
        How to use SSD storage pools
        Requirements and best practices for using SSD storage pools
        Considerations for when to use SSD storage pools
        Considerations for adding SSDs to an existing storage pool versus creating a new one
        Why you add disks to storage pools
        How storage pool works
        Storage Pools window
      Disks
        Reassigning disks to nodes
        Viewing disk information
        How ONTAP reports disk types
        Minimum number of hot spares required for disks
        Spare requirements for multi-disk carrier disks
        Shelf configuration requirements for multi-disk carrier storage shelves
        How to determine when it is safe to remove a multi-disk carrier
        Considerations for sizing RAID groups
        Disks window
      Array LUNs
        Assigning array LUNs
        Reassigning spare array LUNs to nodes
        Zeroing spare array LUNs
        About disks and array LUNs
        Array LUNs window
      Nodes
        Initializing the ComplianceClock time
        Nodes window
      Hardware Cache
        Enabling or disabling Flash Cache modules
        How Flash Cache modules work
        Hardware Cache window
      Events
        Events window
      System alerts
        Acknowledging system health alerts
        Suppressing system health alerts
        Deleting system health alerts
        Available cluster health monitors
        Ways to respond to system health alerts
        System Alerts window
      AutoSupport notifications
        Setting up AutoSupport notifications
        Enabling or disabling AutoSupport settings
        Adding AutoSupport email recipients
        Testing AutoSupport settings
        Generating AutoSupport data
        Viewing AutoSupport summary
        AutoSupport severity types
        AutoSupport window
      Jobs
        Jobs
        Job window
      Flash Pool statistics
        Flash Pool aggregate Statistics window
    Managing logical storage
      Storage Virtual Machines
        SVM Dashboard window
        Monitoring SVMs
        Editing SVM settings
        Deleting SVMs
        Starting SVMs
        Stopping SVMs
        Managing SVMs
        Tracing file access to diagnose access errors on SVMs
        Types of SVMs
        Why you use SVMs
        How ONTAP name service switch configuration works
        Storage Virtual Machines window
        Trace File Access window
      Volumes
        Editing volume properties
        Editing data protection volumes
        Deleting volumes
        Creating FlexClone volumes
        Creating FlexClone files
        Splitting a FlexClone volume from its parent volume
        Viewing the FlexClone volume hierarchy
        Changing the status of a volume
        Viewing the list of saved Snapshot copies
        Creating Snapshot copies outside a defined schedule
        Setting the Snapshot copy reserve
        Hiding the Snapshot copy directory
        Scheduling automatic creation of Snapshot copies
        Restoring a volume from a Snapshot copy
        Extending the expiry date of Snapshot copies
        Renaming Snapshot copies
        Deleting Snapshot copies
        Resizing volumes
        Enabling storage efficiency on a volume
        Changing the deduplication schedule
        Running deduplication operations
        Moving FlexVol volumes between aggregates or nodes
          Manually triggering the cutover for volume move
        Assigning volumes to Storage QoS
        Creating a mirror relationship from a source SVM
        Creating a vault relationship from a source SVM
        Creating a mirror and vault relationship from a source SVM
        Creating an NFS datastore for VMware
        Changing the tiering policy of a volume
        Creating FlexGroup volumes
        Viewing FlexGroup volume information
        Editing FlexGroup volumes
        Specifying advanced options for a FlexGroup volume
        Resizing FlexGroup volumes
        Changing the status of a FlexGroup volume
        Deleting FlexGroup volumes
        Creating FlexCache volumes
        Viewing FlexCache volume information
        Editing FlexCache volumes
        Specifying advanced options for a FlexCache volume
        Resizing FlexCache volumes
        Changing the status of a FlexCache volume
        Deleting FlexCache volumes
        What NetApp Volume Encryption is
        Snapshot configuration
        How volume guarantees work for FlexVol volumes
        FlexClone volumes and space guarantees
        Thin provisioning for greater efficiencies using FlexVol volumes
        Using space reservations with FlexVol volumes
        Benefits of storage efficiency
        Data compression and deduplication
        Guidelines for using deduplication
        Options for resizing volumes
        Considerations when moving volumes
        Volumes window
      Junction Path
        Mounting volumes
        Unmounting FlexVol volumes
        Changing export policies
        Junction Path window
      Shares
        Creating a CIFS share
        Stopping share access
        Creating home directory shares
        Editing share settings
        How ONTAP enables dynamic home directories
        Shares window
      LUNs
        Creating FC SAN optimized LUNs
        Application-specific LUN settings
        Creating LUNs
        Deleting LUNs
        Creating initiator groups
        Deleting initiator groups
        Adding initiators
        Deleting initiators from an initiator group
        Creating port sets
        Deleting port sets
        Cloning LUNs
        Editing LUNs
        Bringing LUNs online
        Taking LUNs offline
        Moving LUNs
        Assigning LUNs to storage QoS
        Editing initiator groups
        Editing initiators
        Editing port sets
        Viewing LUN information
        Viewing initiator groups
        Guidelines for working with FlexVol volumes that contain LUNs
        Understanding space reservations for LUNs
        Guidelines for using LUN multiprotocol type
        Understanding LUN clones
        Initiator hosts
        igroup name
        igroup type
        igroup ostype
        LUNs window
      Qtrees
        Creating qtrees
        Deleting qtrees
        Editing qtrees
        Assigning export policies to qtrees
        Viewing qtree information
        Qtree options
        Qtrees window
      Quotas
        Creating quotas
        Deleting quotas
        Editing quota limits
        Activating or deactivating quotas
        Resizing quotas
        Viewing quota information
        Types of quotas
        Quota limits
        Quota management
        Quotas window
      CIFS protocol
        Setting up CIFS
        Editing the general properties for CIFS
        Adding home directory paths
        Deleting home directory paths
        Resetting CIFS domain controllers
        Updating the CIFS group policy configuration
        Enabling or disabling a CIFS group policy configuration
        Reloading CIFS group policy
        Setting up BranchCache
        Modifying the BranchCache settings
        Deleting the BranchCache configuration
        Adding preferred domain controllers
        Editing preferred domain controllers
        Deleting preferred domain controllers
        Viewing CIFS domain information
        CIFS window
      NFS protocol
        Editing NFS settings
        NFS window
      NVMe protocol
        Setting up NVMe
        Creating an NVMe namespace
        Editing an NVMe namespace
        Cloning an NVMe namespace
        Starting and stopping the NVMe service
        What NVMe is
        What an NVMe subsystem is
          Creating NVMe subsystems
          Editing NVMe subsystems details
          Deleting an NVMe subsystem
          NVMe Subsystems window
        NVMe namespaces
        NVMe namespaces window
      iSCSI protocol
        Creating iSCSI aliases
        Enabling or disabling the iSCSI service on storage system interfaces
        Adding the security method for iSCSI initiators
        Editing default security settings
        Editing initiator security
        Changing the default iSCSI initiator authentication method
        Setting the default security for iSCSI initiators
        Starting or stopping the iSCSI service
        Viewing initiator security information
        iSCSI window
      FC/FCoE protocol
        Starting or stopping the FC or FCoE service
        Changing an FC or FCoE node name
        The FCoE protocol
        FC/FCoE window
      Export policies
        Creating an export policy
        Renaming export policies
        Deleting export policies
        Adding rules to an export policy
        Modifying export policy rules
        Deleting export policy rules
        How export policies control client access to volumes or qtrees
        Export Policies window
      Efficiency policies
        Adding efficiency policies
        Editing efficiency policies
        Deleting efficiency policies
        Enabling or disabling efficiency policies
        What an efficiency policy is
        Understanding predefined efficiency policies
        Efficiency Policies window
      Protection policies
        Creating protection policies
        Deleting protection policies
        Editing protection policies
        Protection Policies window
      QoS policy groups
        Creating QoS policy groups
        Deleting QoS policy groups
        Editing QoS policy groups
        Managing workload performance by using Storage QoS
        How Storage QoS works
        How the maximum throughput limit works
        Rules for assigning storage objects to policy groups
        QoS Policy Groups window
      NIS services
        Adding NIS domains
        Editing NIS domains
        NIS window
      LDAP client services
        Adding an LDAP client configuration
        Deleting an LDAP client configuration
        Editing an LDAP client configuration
        LDAP Client window
      LDAP configuration services
        Editing active LDAP clients
        Deleting active LDAP clients
        LDAP Configuration window
      Kerberos realm services
        Creating a Kerberos realm configuration
        Editing a Kerberos realm configuration
        Deleting Kerberos realm configurations
        Using Kerberos with NFS for strong security
        Kerberos authentication for CIFS
        Kerberos Realm window
      Kerberos interface services
        Editing Kerberos configuration
        Kerberos Interface window
      DNS/DDNS Services
        Enabling or disabling DDNS
        Editing DNS and DDNS settings
        DNS/DDNS Services window
      Users
        Adding SVM user accounts
        Changing the password for SVM user accounts
        Editing SVM user accounts
        Locking or unlocking SVM user accounts
        Users window
      Roles
        Adding roles
        Editing roles
        Roles window
      UNIX
        UNIX window
      Windows
        Creating a local Windows group
        Editing local Windows group properties
        Adding user accounts to a Windows local group
        Renaming a local Windows group
        Deleting a local Windows group
        Creating a local Windows user account
        Editing the local Windows user properties
        Assigning group memberships to a user account
        Renaming a local Windows user
        Resetting the password of a Windows local user
        Deleting a local Windows user account
        Windows window
      Name mapping
        Name mapping conversion rules
        Name Mapping window
    Managing data protection
      Mirror relationships
        Creating a mirror relationship from a destination SVM
        Deleting mirror relationships
        Editing mirror relationships
        Initializing mirror relationships
        Updating mirror relationships
        Quiescing mirror relationships
        Resuming mirror relationships
        Breaking SnapMirror relationships
        Resynchronizing mirror relationships
        Reverse resynchronizing mirror relationships
        Aborting a mirror transfer
        Restoring a volume in a mirror relationship
        How SnapMirror relationships work
      Vault relationships
        Creating a vault relationship from a destination SVM
        Deleting vault relationships
        Editing vault relationships
        Initializing a vault relationship
        Updating a vault relationship
        Quiescing a vault relationship
        Resuming a vault relationship
        Aborting a Snapshot copy transfer
        Restoring a volume in a vault relationship
        What a SnapVault backup is
      Mirror and vault relationships
        Creating a mirror and vault relationship from a destination SVM
        Deleting mirror and vault relationships
        Editing mirror and vault relationships
        Initializing mirror and vault relationships
        Updating mirror and vault relationships
        Quiescing mirror and vault relationships
        Resuming mirror and vault relationships
        Breaking mirror and vault relationships
        Resynchronizing mirror and vault relationships
        Reverse resynchronizing mirror and vault relationships
        Aborting mirror and vault relationships
        Restoring a volume in a mirror and vault relationship
      What lag time is
      Types of data protection relationships
      Understanding workloads supported by StrictSync and Sync policies
      SnapMirror licensing
      Protection window
      SVM Relationships
        Creating SVM relationships
        Editing SVM relationships
        Managing SVM relationships
        SVM Relationships Window
      Protection policies
        Creating protection policies
        Protection Policies window
      Snapshot policies
        Creating Snapshot policies
        Editing Snapshot policies
        Deleting Snapshot policies
        About Snapshot policies
        Snapshot Policies window
      Schedules
        Creating schedules
        Editing schedules
        Deleting schedules
        Schedules
        Schedules window
  Cluster management using System Manager 9.5
    Understanding System Manager
    Icons used in the application interface
    System Manager window layouts
    Window layout customization
    System Manager enhancements
    Setting up your cluster environment
      Setting up the cluster by using OnCommand System Manager
        Setting up a cluster by using the template file
        Setting up the cluster manually
          Creating a cluster
          Setting up a network
            Setting up a network when an IP address range is enabled
            Setting up a network when an IP address range is disabled
          Setting up a support page
          Reviewing storage recommendations
          Creating an SVM
      Accessing a cluster by using the OnCommand System Manager browser-based graphic interface
      Configuring System Manager options
      Viewing OnCommand System Manager log files
        How system logging works
      Configuring a cluster by using System Manager
        Accessing a cluster by using the OnCommand System Manager browser-based graphic interface
        Setting up the cluster
          Updating the cluster name
          Changing the cluster password
          Editing DNS configurations
          Creating a cluster management logical interface
          Editing the node name
          Creating a node management logical interface
          Editing AutoSupport settings
          Adding licenses
          Setting the time zone for a cluster
          Monitoring HA pairs
        Setting up the network
          Creating IPspaces
          Creating broadcast domains
          Creating subnets
        Setting up physical storage
          Assigning disks to nodes
          Zeroing spare disks
          Provisioning storage through aggregates
            Provisioning storage by creating an aggregate based on storage recommendations
            Provisioning storage by creating an aggregate manually
            Provisioning storage by creating a Flash Pool aggregate manually
            Provisioning storage by creating a SnapLock aggregate manually
            Provisioning storage by creating a FabricPool-enabled aggregate manually
        Setting up logical storage
          Creating SVMs
            Configuring CIFS and NFS protocols on SVMs
            Configuring iSCSI protocol on SVMs
            Configuring FC protocol and FCoE protocol on SVMs
            Configuring NVMe protocol on SVMs
            Delegating administration to SVM administrators
          Creating FlexVol volumes
          Creating SnapLock volumes
    Setting up SAML authentication
      Enabling SAML authentication
      Disabling SAML authentication
    Setting up peering
      Prerequisites for cluster peering
      Creating intercluster LIFs
      Creating cluster peer relationships
      Creating SVM peers
      What passphrases are
    Managing clusters
      Understanding quorum and epsilon
      Dashboard window
        Monitoring a cluster using the dashboard
      Applications
        Provisioning a basic template
        Adding Microsoft SQL Server over SAN to System Manager
        Application provisioning settings
        Editing an application
        Deleting an application
      Configuration update
        Configuring the administration details of an SVM
        Configuration Updates window
      Service Processors
        Assigning IP addresses to Service Processors
        Editing Service Processor settings
        Understanding the Service Processor
        Service Processors window
      Cluster peers
        Modifying the cluster peer passphrase
        Modifying the peer network parameters
        Deleting cluster peer relationships
        Peers window
      High availability
        High Availability window
      Licenses
        Deleting licenses
        License types and entitlement risk
        Licenses window
      Cluster Expansion
        Adding nodes to a cluster
        Configuring the network details of the nodes
      Updating clusters
        Updating clusters in a non MetroCluster configuration
        Updating clusters in a MetroCluster configuration
        Obtaining ONTAP software images
        Updating single-node clusters
        Updating a cluster nondisruptively
        How to update a cluster nondisruptively
        Cluster Update window
      Date and time settings of a cluster
        Date and Time window
      SNMP
        Enabling or disabling SNMP
        Editing SNMP information
        Enabling or disabling SNMP traps
        Testing the trap host configuration
        SNMP window
      LDAP
        Viewing the LDAP client configuration
        Using LDAP services
        LDAP window
      Users
        Adding a cluster user account
        Editing a cluster user account
        Changing passwords for cluster user accounts
        Locking or unlocking cluster user accounts
        User accounts (cluster administrators only)
        Roles
        Users window
      Roles
        Adding roles
        Editing roles
        Roles and permissions
        Roles window
    Managing the network
      IPspaces
        Editing IPspaces
        Deleting IPspaces
      Broadcast domains
        Editing broadcast domain settings
        Deleting broadcast domains
      Subnets
        Editing subnet settings
        Deleting subnets
      Network interfaces
        Creating network interfaces
        Editing network interface settings
        Deleting network interfaces
        Migrating a LIF
      Ethernet ports
        Creating interface groups
        Creating VLAN interfaces
        Editing Ethernet port settings
        Editing interface group settings
        Modifying the MTU size of a VLAN
        Deleting VLANs
        Ports and adapters
      FC/FCoE and NVMe adapters
        Editing the FC/FCoE and NVMe adapter speed settings
      Network window
    Managing physical storage
      Storage tiers
        Editing aggregates
        Deleting aggregates
        Changing the RAID configuration when creating an aggregate
        Provisioning cache by adding SSDs
          Provisioning cache to aggregates by adding SSDs
          Increasing the cache for Flash Pool aggregates by adding SSDs
        Adding capacity disks
        Changing the RAID group when adding capacity disks
        Moving FlexVol volumes
        Mirroring aggregates
        Viewing aggregate information
        Installing a CA certificate if you use StorageGRID
        How moving a FlexVol volume works
        How you can use effective ONTAP disk type for mixing HDDs
        What compatible spare disks are
        How System Manager works with hot spares
        Rules for displaying disk types and disk RPM
        How mirrored aggregates work
        What a FabricPool is
        Storage recommendations for creating aggregates
        Storage Tiers window
      Configuring and managing cloud tiers
        Adding a cloud tier
        Attaching an aggregate to a cloud tier
        Provisioning storage by creating a FabricPool-enabled aggregate manually
        Changing the tiering policy of a volume
        Editing a cloud tier
        Deleting a cloud tier
        What cloud tiers and tiering policies are
        What inactive (cold) data is
        Cloud Tier window
      Aggregates
        Aggregates window
      Storage pools
        Creating a storage pool
        Adding disks to a storage pool
        Deleting storage pools
        How to use SSD storage pools
        Requirements and best practices for using SSD storage pools
        Considerations for when to use SSD storage pools
        Considerations for adding SSDs to an existing storage pool versus creating a new one
        Why you add disks to storage pools
        How storage pool works
        Storage Pools window
      Disks
        Reassigning disks to nodes
        Viewing disk information
        How ONTAP reports disk types
        Minimum number of hot spares required for disks
        Spare requirements for multi-disk carrier disks
        Shelf configuration requirements for multi-disk carrier storage shelves
        How to determine when it is safe to remove a multi-disk carrier
        Considerations for sizing RAID groups
        Disks window
      Array LUNs
        Assigning array LUNs
        Reassigning spare array LUNs to nodes
        Zeroing spare array LUNs
        About disks and array LUNs
        Array LUNs window
      Nodes
        Initializing the ComplianceClock time
        Nodes window
      Hardware Cache
        Enabling or disabling Flash Cache modules
        How Flash Cache modules work
        Hardware Cache window
      Events
        Events window
      System alerts
        Acknowledging system health alerts
        Suppressing system health alerts
        Deleting system health alerts
        Available cluster health monitors
        Ways to respond to system health alerts
        System Alerts window
      AutoSupport notifications
        Setting up AutoSupport notifications
        Enabling or disabling AutoSupport settings
        Adding AutoSupport email recipients
        Testing AutoSupport settings
        Generating AutoSupport data
        Viewing AutoSupport summary
        AutoSupport severity types
        AutoSupport window
      Jobs
        Jobs
        Job window
      Flash Pool statistics
        Flash Pool aggregate Statistics window
    Managing logical storage
      Storage Virtual Machines
        SVM Dashboard window
        Monitoring SVMs
        Editing SVM settings
        Deleting SVMs
        Starting SVMs
        Stopping SVMs
        Managing SVMs
        Types of SVMs
        Why you use SVMs
        How ONTAP name service switch configuration works
        Storage Virtual Machines window
      Volumes
        Editing volume properties
        Editing data protection volumes
        Deleting volumes
        Creating FlexClone volumes
        Creating FlexClone files
        Splitting a FlexClone volume from its parent volume
        Viewing the FlexClone volume hierarchy
        Changing the status of a volume
        Viewing the list of saved Snapshot copies
        Creating Snapshot copies outside a defined schedule
        Setting the Snapshot copy reserve
        Hiding the Snapshot copy directory
        Scheduling automatic creation of Snapshot copies
        Restoring a volume from a Snapshot copy
        Extending the expiry date of Snapshot copies
        Renaming Snapshot copies
        Deleting Snapshot copies
        Resizing volumes
        Enabling storage efficiency on a volume
        Changing the deduplication schedule
        Running deduplication operations
        Moving FlexVol volumes between aggregates or nodes
          Manually triggering the cutover for volume move
        Assigning volumes to Storage QoS
        Creating a mirror relationship from a source SVM
        Creating a vault relationship from a source SVM
        Creating a mirror and vault relationship from a source SVM
        Creating an NFS datastore for VMware
        Changing the tiering policy of a volume
        Creating FlexGroup volumes
          Specifying advanced options for a FlexGroup volume
        Editing FlexGroup volumes
        Resizing FlexGroup volumes
        Changing the status of a FlexGroup volume
        Deleting FlexGroup volumes
        Viewing FlexGroup volume information
        What NetApp Volume Encryption is
        Snapshot configuration
        How volume guarantees work for FlexVol volumes
        FlexClone volumes and space guarantees
        Thin provisioning for greater efficiencies using FlexVol volumes
        Using space reservations with FlexVol volumes
        Benefits of storage efficiency
        Data compression and deduplication
        Guidelines for using deduplication
        Options for resizing volumes
        Considerations when moving volumes
        Volumes window
      Junction Path
        Mounting volumes
        Unmounting FlexVol volumes
        Changing export policies
        Junction Path window
      Shares
        Creating a CIFS share
        Stopping share access
        Creating home directory shares
        Editing share settings
        How ONTAP enables dynamic home directories
        Shares window
      LUNs
        Creating FC SAN optimized LUNs
        Application-specific LUN settings
        Creating LUNs
        Deleting LUNs
        Creating initiator groups
        Deleting initiator groups
        Adding initiators
        Deleting initiators from an initiator group
        Creating port sets
        Deleting port sets
        Cloning LUNs
        Editing LUNs
        Bringing LUNs online
        Taking LUNs offline
        Moving LUNs
        Assigning LUNs to storage QoS
        Editing initiator groups
        Editing initiators
        Editing port sets
        Viewing LUN information
        Viewing initiator groups
        Guidelines for working with FlexVol volumes that contain LUNs
        Understanding space reservations for LUNs
        Guidelines for using LUN multiprotocol type
        Understanding LUN clones
        Initiator hosts
        igroup name
        igroup type
        igroup ostype
        LUNs window
      Qtrees
        Creating qtrees
        Deleting qtrees
        Editing qtrees
        Assigning export policies to qtrees
        Viewing qtree information
        Qtree options
        Qtrees window
      Quotas
        Creating quotas
        Deleting quotas
        Editing quota limits
        Activating or deactivating quotas
        Resizing quotas
        Viewing quota information
        Types of quotas
        Quota limits
        Quota management
        Quotas window
      CIFS protocol
        Setting up CIFS
        Editing the general properties for CIFS
        Adding home directory paths
        Deleting home directory paths
        Resetting CIFS domain controllers
        Updating the CIFS group policy configuration
        Enabling or disabling a CIFS group policy configuration
        Reloading CIFS group policy
        Setting up BranchCache
        Modifying the BranchCache settings
        Deleting the BranchCache configuration
        Adding preferred domain controllers
        Editing preferred domain controllers
        Deleting preferred domain controllers
        Viewing CIFS domain information
        CIFS window
      NFS protocol
        Editing NFS settings
        NFS window
      NVMe protocol
        Setting up NVMe
        Creating an NVMe namespace
        Editing an NVMe namespace
        Cloning an NVMe namespace
        Starting and stopping the NVMe service
        What NVMe is
        What an NVMe subsystem is
          Creating NVMe subsystems
          Editing NVMe subsystems details
          Deleting an NVMe subsystem
          NVMe Subsystems window
        NVMe namespaces
        NVMe namespaces window
      iSCSI protocol
        Creating iSCSI aliases
        Enabling or disabling the iSCSI service on storage system interfaces
        Adding the security method for iSCSI initiators
        Editing default security settings
        Editing initiator security
        Changing the default iSCSI initiator authentication method
        Setting the default security for iSCSI initiators
        Starting or stopping the iSCSI service
        Viewing initiator security information
        iSCSI window
      FC/FCoE protocol
        Starting or stopping the FC or FCoE service
        Changing an FC or FCoE node name
        The FCoE protocol
        FC/FCoE window
      Export policies
        Creating an export policy
        Renaming export policies
        Deleting export policies
        Adding rules to an export policy
        Modifying export policy rules
        Deleting export policy rules
        How export policies control client access to volumes or qtrees
        Export Policies window
      Efficiency policies
        Adding efficiency policies
        Editing efficiency policies
        Deleting efficiency policies
        Enabling or disabling efficiency policies
        What an efficiency policy is
        Understanding predefined efficiency policies
        Efficiency Policies window
      Protection policies
        Creating protection policies
        Deleting protection policies
        Editing protection policies
        Protection Policies window
      QoS policy groups
        Creating QoS policy groups
        Deleting QoS policy groups
        Editing QoS policy groups
        Managing workload performance by using Storage QoS
        How Storage QoS works
        How the maximum throughput limit works
        Rules for assigning storage objects to policy groups
        QoS Policy Groups window
      NIS services
        Adding NIS domains
        Editing NIS domains
        NIS window
      LDAP client services
        Adding an LDAP client configuration
        Deleting an LDAP client configuration
        Editing an LDAP client configuration
        LDAP Client window
      LDAP configuration services
        Editing active LDAP clients
        Deleting active LDAP clients
        LDAP Configuration window
      Kerberos realm services
        Creating a Kerberos realm configuration
        Editing a Kerberos realm configuration
        Deleting Kerberos realm configurations
        Using Kerberos with NFS for strong security
        Kerberos authentication for CIFS
        Kerberos Realm window
      Kerberos interface services
        Editing Kerberos configuration
        Kerberos Interface window
      DNS/DDNS Services
        Enabling or disabling DDNS
        Editing DNS and DDNS settings
        DNS/DDNS Services window
      Users
        Adding SVM user accounts
        Changing the password for SVM user accounts
        Editing SVM user accounts
        Locking or unlocking SVM user accounts
        Users window
      Roles
        Adding roles
        Editing roles
        Roles window
      UNIX
        UNIX window
      Windows
        Creating a local Windows group
        Editing local Windows group properties
        Adding user accounts to a Windows local group
        Renaming a local Windows group
        Deleting a local Windows group
        Creating a local Windows user account
        Editing the local Windows user properties
        Assigning group memberships to a user account
        Renaming a local Windows user
        Resetting the password of a Windows local user
        Deleting a local Windows user account
        Windows window
      Name mapping
        Name mapping conversion rules
        Name Mapping window
    Managing data protection
      Mirror relationships
        Creating a mirror relationship from a destination SVM
        Deleting mirror relationships
        Editing mirror relationships
        Initializing mirror relationships
        Updating mirror relationships
        Quiescing mirror relationships
        Resuming mirror relationships
        Breaking SnapMirror relationships
        Resynchronizing mirror relationships
        Reverse resynchronizing mirror relationships
        Aborting a mirror transfer
        Restoring a volume in a mirror relationship
        How SnapMirror relationships work
      Vault relationships
        Creating a vault relationship from a destination SVM
        Deleting vault relationships
        Editing vault relationships
        Initializing a vault relationship
        Updating a vault relationship
        Quiescing a vault relationship
        Resuming a vault relationship
        Aborting a Snapshot copy transfer
        Restoring a volume in a vault relationship
        What a SnapVault backup is
      Mirror and vault relationships
        Creating a mirror and vault relationship from a destination SVM
        Deleting mirror and vault relationships
        Editing mirror and vault relationships
        Initializing mirror and vault relationships
        Updating mirror and vault relationships
        Quiescing mirror and vault relationships
        Resuming mirror and vault relationships
        Breaking mirror and vault relationships
        Resynchronizing mirror and vault relationships
        Reverse resynchronizing mirror and vault relationships
        Aborting mirror and vault relationships
        Restoring a volume in a mirror and vault relationship
      What lag time is
      Types of data protection relationships
      Understanding workloads supported by StrictSync and Sync policies
      SnapMirror licensing
      Protection window
      SVM Relationships
        Creating SVM relationships
        Editing SVM relationships
        Managing SVM relationships
        SVM Relationships Window
      Protection policies
        Creating protection policies
        Protection Policies window
      Snapshot policies
        Creating Snapshot policies
        Editing Snapshot policies
        Deleting Snapshot policies
        About Snapshot policies
        Snapshot Policies window
      Schedules
        Creating schedules
        Editing schedules
        Deleting schedules
        Schedules
        Schedules window
  Cluster management using System Manager 9.3 and 9.4
    Understanding System Manager
    Icons used in the application interface
    System Manager window layouts
    Window layout customization
    System Manager enhancements
    Setting up your cluster environment
      Setting up the cluster by using OnCommand System Manager
        Setting up a cluster by using the template file
        Setting up the cluster manually
          Creating a cluster
          Setting up a network
            Setting up a network when an IP address range is enabled
            Setting up a network when an IP address range is disabled
          Setting up a support page
          Reviewing storage recommendations
          Creating an SVM
      Accessing a cluster by using the OnCommand System Manager browser-based graphic interface
      Configuring System Manager options
      Viewing OnCommand System Manager log files
        How system logging works
      Configuring a cluster by using System Manager
        Accessing a cluster by using the OnCommand System Manager browser-based graphic interface
        Setting up the cluster
          Updating the cluster name
          Changing the cluster password
          Editing DNS configurations
          Creating a cluster management interface
          Editing the node name
          Creating a node management LIF
          Editing AutoSupport settings
          Adding licenses
          Setting the time zone for a cluster
          Monitoring HA pairs
        Setting up the network
          Creating IPspaces
          Creating broadcast domains
          Creating subnets
        Setting up physical storage
          Assigning disks to nodes
          Zeroing spare disks
          Provisioning storage through aggregates
            Provisioning storage by creating an aggregate based on storage recommendations
            Provisioning storage by creating an aggregate manually
            Provisioning storage by creating a Flash Pool aggregate manually
            Provisioning storage by creating a SnapLock aggregate manually
            Provisioning storage by creating a FabricPool-enabled aggregate manually
        Setting up logical storage
          Creating SVMs
            Configuring CIFS and NFS protocols on SVMs
            Configuring iSCSI protocol on SVMs
            Configuring FC protocol and FCoE protocol on SVMs
            Configuring NVMe protocol on SVMs
            Delegating administration to SVM administrators
          Creating FlexVol volumes
          Creating SnapLock volumes
    Setting up SAML authentication
      Enabling SAML authentication
      Disabling SAML authentication
    Setting up peering
      Prerequisites for cluster peering
      Creating intercluster LIFs
      Creating cluster peer relationships
      Creating SVM peers
      What passphrases are
    Managing clusters
      Understanding quorum and epsilon
      Dashboard window
        Monitoring a cluster using the dashboard
      Applications
        Provisioning a basic template
        Adding applications to System Manager
        Application provisioning settings
      Configuration update
        Configuring the administration details of an SVM
        Configuration Updates window
      Service Processors
        Assigning IP addresses to Service Processors
        Editing Service Processor settings
        Understanding the Service Processor
        Service Processors window
      Cluster peers
        Modifying the cluster peer passphrase
        Modifying the peer network parameters
        Deleting cluster peer relationships
        Peers window
      High availability
        High Availability window
      Licenses
        Deleting licenses
        License types and entitlement risk
        Licenses window
      Cluster Expansion
        Adding nodes to a cluster
        Configuring the network details of the nodes
      Updating clusters
        Obtaining ONTAP software images
        Updating single-node clusters disruptively
        Updating a cluster nondisruptively
        How to update a cluster nondisruptively
        Cluster Update window
      Date and time settings of a cluster
        Date and Time window
      SNMP
        Enabling or disabling SNMP
        Setting SNMP information
        Enabling or disabling SNMP traps
        Testing the trap host configuration
        SNMP window
      LDAP
        Viewing the LDAP client configuration
        Using LDAP services
        LDAP window
      Users
        Adding a cluster user account
        Editing a cluster user account
        Changing passwords for cluster user accounts
        Locking or unlocking cluster user accounts
        User accounts (cluster administrators only)
        Roles
        Users window
      Roles
        Adding roles
        Editing roles
        Roles and permissions
        Roles window
    Managing the network
      IPspaces
        Editing IPspaces
        Deleting IPspaces
      Broadcast domains
        Editing broadcast domain settings
        Deleting broadcast domains
      Subnets
        Editing subnet settings
        Deleting subnets
      Network interfaces
        Creating network interfaces
        Editing network interface settings
        Deleting network interfaces
        Migrating a LIF
      Ethernet ports
        Creating interface groups
        Creating VLAN interfaces
        Editing Ethernet port settings
        Editing interface group settings
        Modifying the MTU size of a VLAN
        Deleting VLANs
        Ports and adapters
      FC/FCoE and NVMe adapters
        Editing the FC/FCoE and NVMe adapter speed settings
      Network window
    Managing physical storage
      Storage tiers
        Editing aggregates
        Deleting aggregates
        Changing the RAID configuration when creating an aggregate
        Provisioning cache by adding SSDs
          Provisioning cache to aggregates by adding SSDs
          Increasing the cache for Flash Pool aggregates by adding SSDs
        Adding capacity disks
        Changing the RAID group when adding capacity disks
        Moving FlexVol volumes
        Mirroring aggregates
        Viewing aggregate information
        Installing a CA certificate if you use StorageGRID Webscale
        How moving a FlexVol volume works
        How you can use effective ONTAP disk type for mixing HDDs
        What compatible spare disks are
        How System Manager works with hot spares
        Rules for displaying disk types and disk RPM
        How mirrored aggregates work
        What a FabricPool is
        Storage recommendations for creating aggregates
        Storage Tiers window
      Configuring and managing external capacity tiers
        Adding an external capacity tier
        Attaching an aggregate to an external capacity tier
        Provisioning storage by creating a FabricPool-enabled aggregate manually
        Changing the tiering policy of a volume
        Editing an external capacity tier
        Deleting an external capacity tier
        What external capacity tiers and tiering policies are
        What inactive (cold) data is
        External Capacity Tier window
      Aggregates
        Aggregates window
      Storage pools
        Creating a storage pool
        Adding disks to a storage pool
        Deleting storage pools
        How to use SSD storage pools
        Requirements and best practices for using SSD storage pools
        Considerations for when to use SSD storage pools
        Considerations for adding SSDs to an existing storage pool versus creating a new one
        Why you add disks to storage pools
        How storage pool works
        Storage Pools window
      Disks
        Reassigning disks to nodes
        Viewing disk information
        How ONTAP reports disk types
        Minimum number of hot spares required for disks
        Spare requirements for multi-disk carrier disks
        Shelf configuration requirements for multi-disk carrier storage shelves
        How to determine when it is safe to remove a multi-disk carrier
        Considerations for sizing RAID groups
        Disks window
      Array LUNs
        Assigning array LUNs
        Reassigning spare array LUNs to nodes
        Zeroing spare array LUNs
        About disks and array LUNs
        Array LUNs window
      Nodes
        Initializing the ComplianceClock time
        Nodes window
      Flash Cache
        Enabling or disabling Flash Cache
        How Flash Cache works
        Flash Cache window
      Events
        Events window
      System alerts
        Acknowledging system health alerts
        Suppressing system health alerts
        Deleting system health alerts
        Available cluster health monitors
        Ways to respond to system health alerts
        System Alerts window
      AutoSupport notifications
        Setting up AutoSupport notifications
        Enabling or disabling AutoSupport settings
        Adding AutoSupport email recipients
        Testing AutoSupport settings
        Generating AutoSupport data
        Viewing AutoSupport summary
        AutoSupport severity types
        AutoSupport window
      Jobs
        Jobs
        Job window
      Flash Pool statistics
        Flash Pool aggregate Statistics window
    Managing logical storage
      Storage Virtual Machines
        SVM Dashboard window
        Monitoring SVMs
        Editing SVM settings
        Deleting SVMs
        Starting SVMs
        Stopping SVMs
        Managing SVMs
        Types of SVMs
        Why you use SVMs
        How ONTAP name service switch configuration works
        Storage Virtual Machines window
      Volumes
        Editing volume properties
        Editing data protection volumes
        Deleting volumes
        Creating FlexClone volumes
        Creating FlexClone files
        Splitting a FlexClone volume from its parent volume
        Viewing the FlexClone volume hierarchy
        Changing the status of a volume
        Viewing the list of saved Snapshot copies
        Creating Snapshot copies outside a defined schedule
        Setting the Snapshot copy reserve
        Hiding the Snapshot copy directory
        Scheduling automatic creation of Snapshot copies
        Restoring a volume from a Snapshot copy
        Extending the expiry date of Snapshot copies
        Renaming Snapshot copies
        Deleting Snapshot copies
        Resizing volumes
        Enabling storage efficiency on a volume
        Changing the deduplication schedule
        Running deduplication operations
        Moving FlexVol volumes between aggregates or nodes
          Manually triggering the cutover for volume move
        Assigning volumes to Storage QoS
        Creating a mirror relationship from a source SVM
        Creating a vault relationship from a source SVM
        Creating a mirror and vault relationship from a source SVM
        Creating an NFS datastore for VMware
        Changing the tiering policy of a volume
        Creating FlexGroup volumes
        Editing FlexGroup volumes
        Resizing FlexGroup volumes
        Changing the status of a FlexGroup volume
        Deleting FlexGroup volumes
        Viewing FlexGroup volume information
        What NetApp Volume Encryption is
        Snapshot configuration
        How volume guarantees work for FlexVol volumes
        FlexClone volumes and space guarantees
        Thin provisioning for greater efficiencies using FlexVol volumes
        Using space reservations with FlexVol volumes
        Benefits of storage efficiency
        Data compression and deduplication
        Guidelines for using deduplication
        Options for resizing volumes
        Considerations when moving volumes
        Volumes window
      Junction Path
        Mounting volumes
        Unmounting FlexVol volumes
        Changing export policies
        Junction Path window
      Shares
        Creating a CIFS share
        Stopping share access
        Creating home directory shares
        Editing share settings
        How ONTAP enables dynamic home directories
        Shares window
      LUNs
        Creating FC SAN optimized LUNs
        Application-specific LUN settings
        Creating LUNs
        Deleting LUNs
        Creating initiator groups
        Deleting initiator groups
        Adding initiators
        Deleting initiators from an initiator group
        Creating port sets
        Deleting port sets
        Cloning LUNs
        Editing LUNs
        Bringing LUNs online
        Taking LUNs offline
        Moving LUNs
        Assigning LUNs to storage QoS
        Editing initiator groups
        Editing initiators
        Editing port sets
        Viewing LUN information
        Viewing initiator groups
        Guidelines for working with FlexVol volumes that contain LUNs
        Understanding space reservations for LUNs
        Guidelines for using LUN multiprotocol type
        Understanding LUN clones
        Initiator hosts
        igroup name
        igroup type
        igroup ostype
        LUNs window
      Qtrees
        Creating qtrees
        Deleting qtrees
        Editing qtrees
        Assigning export policies to qtrees
        Viewing qtree information
        Qtree options
        Qtrees window
      Quotas
        Creating quotas
        Deleting quotas
        Editing quota limits
        Activating or deactivating quotas
        Resizing quotas
        Viewing quota information
        Types of quotas
        Quota limits
        Quota management
        Quotas window
      CIFS protocol
        Setting up CIFS
        Editing the general properties for CIFS
        Adding home directory paths
        Deleting home directory paths
        Resetting CIFS domain controllers
        Updating the CIFS group policy configuration
        Enabling or disabling a CIFS group policy configuration
        Reloading CIFS group policy
        Setting up BranchCache
        Modifying the BranchCache settings
        Deleting the BranchCache configuration
        Adding preferred domain controllers
        Editing preferred domain controllers
        Deleting preferred domain controllers
        Viewing CIFS domain information
        CIFS window
      NFS protocol
        Editing NFS settings
        NFS window
      NVMe protocol
        Setting up NVMe
        Creating an NVMe namespace
        Editing an NVMe namespace
        Cloning an NVMe namespace
        Starting and stopping the NVMe service
        What NVMe is
        NVMe namespaces
        NVMe subsystems
        NVMe namespaces window
      iSCSI protocol
        Creating iSCSI aliases
        Enabling or disabling the iSCSI service on storage system interfaces
        Adding the security method for iSCSI initiators
        Editing default security settings
        Editing initiator security
        Changing the default iSCSI initiator authentication method
        Setting the default security for iSCSI initiators
        Starting or stopping the iSCSI service
        Viewing initiator security information
        iSCSI window
      FC/FCoE protocol
        Starting or stopping the FC or FCoE service
        Changing an FC or FCoE node name
        The FCoE protocol
        FC/FCoE window
      Export policies
        Creating an export policy
        Renaming export policies
        Deleting export policies
        Adding rules to an export policy
        Modifying export policy rules
        Deleting export policy rules
        How export policies control client access to volumes or qtrees
        Export Policies window
      Efficiency policies
        Adding efficiency policies
        Editing efficiency policies
        Deleting efficiency policies
        Enabling or disabling efficiency policies
        What an efficiency policy is
        Understanding predefined efficiency policies
        Efficiency Policies window
      Protection policies
        Creating protection policies
        Deleting protection policies
        Editing protection policies
        Protection Policies window
      QoS policy groups
        Creating QoS policy groups
        Deleting QoS policy groups
        Editing QoS policy groups
        Managing workload performance by using Storage QoS
        How Storage QoS works
        How the maximum throughput limit works
        Rules for assigning storage objects to policy groups
        QoS Policy Groups window
      NIS services
        Adding NIS domains
        Editing NIS domains
        NIS window
      LDAP client services
        Adding an LDAP client configuration
        Deleting an LDAP client configuration
        Editing an LDAP client configuration
        LDAP Client window
      LDAP configuration services
        Editing active LDAP clients
        Deleting active LDAP clients
        LDAP Configuration window
      Kerberos realm services
        Creating a Kerberos realm configuration
        Editing a Kerberos realm configuration
        Deleting Kerberos realm configurations
        Using Kerberos with NFS for strong security
        Kerberos authentication for CIFS
        Kerberos Realm window
      Kerberos interface services
        Editing Kerberos configuration
        Kerberos Interface window
      DNS/DDNS Services
        Enabling or disabling DDNS
        Editing DNS and DDNS settings
        DNS/DDNS Services window
      Users
        Adding SVM user accounts
        Changing the password for SVM user accounts
        Editing SVM user accounts
        Locking or unlocking SVM user accounts
        Users window
      Roles
        Adding roles
        Editing roles
        Roles window
      UNIX
        UNIX window
      Windows
        Creating a local Windows group
        Editing local Windows group properties
        Adding user accounts to a Windows local group
        Renaming a local Windows group
        Deleting a local Windows group
        Creating a local Windows user account
        Editing the local Windows user properties
        Assigning group memberships to a user account
        Renaming a local Windows user
        Resetting the password of a Windows local user
        Deleting a local Windows user account
        Windows window
      Name mapping
        Name mapping conversion rules
        Name Mapping window
    Managing data protection
      Mirror relationships
        Creating a mirror relationship from a destination SVM
        Deleting mirror relationships
        Editing mirror relationships
        Initializing mirror relationships
        Updating mirror relationships
        Quiescing mirror relationships
        Resuming mirror relationships
        Breaking SnapMirror relationships
        Resynchronizing mirror relationships
        Reverse resynchronizing mirror relationships
        Aborting a mirror transfer
        Restoring a volume in a mirror relationship
        How SnapMirror relationships work
      Vault relationships
        Creating a vault relationship from a destination SVM
        Deleting vault relationships
        Editing vault relationships
        Initializing a vault relationship
        Updating a vault relationship
        Quiescing a vault relationship
        Resuming a vault relationship
        Aborting a Snapshot copy transfer
        Restoring a volume in a vault relationship
        What a SnapVault backup is
      Mirror and vault relationships
        Creating a mirror and vault relationship from a destination SVM
        Deleting mirror and vault relationships
        Editing mirror and vault relationships
        Initializing mirror and vault relationships
        Updating mirror and vault relationships
        Quiescing mirror and vault relationships
        Resuming mirror and vault relationships
        Breaking mirror and vault relationships
        Resynchronizing mirror and vault relationships
        Reverse resynchronizing mirror and vault relationships
        Aborting mirror and vault relationships
        Restoring a volume in a mirror and vault relationship
      What lag time is
      Types of data protection relationships
      SnapMirror licensing
      Protection window
      Protection policies
        Creating protection policies
        Protection Policies window
      Snapshot policies
        Creating Snapshot policies
        Editing Snapshot policies
        Deleting Snapshot policies
        About Snapshot policies
        Snapshot Policies window
      Schedules
        Creating schedules
        Editing schedules
        Deleting schedules
        Schedules
        Schedules window
  Cluster management using System Manager 9.2 and earlier
    Welcome to OnCommand System Manager Help
      Access to your favorite topics
    Understanding System Manager
    Icons used in the application interface
    Window layout customization
    Supportability Dashboard
    Where to find additional ONTAP information
    Setting up your cluster environment
      Setting up the cluster by using OnCommand System Manager
        Setting up a cluster by using the template file
        Setting up the cluster manually
          Creating a cluster
          Setting up a network
            Setting up a network when an IP address range is enabled
            Setting up a network when an IP address range is disabled
          Setting up a support page
          Reviewing storage recommendations
          Creating an SVM
      Accessing a cluster by using OnCommand System Manager browser-based graphic interface
      Configuring System Manager options
      Viewing OnCommand System Manager log files
        How system logging works
      Configuring a cluster by using System Manager
        Accessing a cluster by using OnCommand System Manager browser-based graphic interface
        Setting up the cluster
          Updating the cluster name
          Changing the cluster password
          Editing DNS configurations
          Creating a cluster-management interface
          Editing the node name
          Creating a node-management interface
          Editing AutoSupport settings
          Adding licenses
          Setting the time for a cluster
          Monitoring HA pairs
        Setting up the network
          Creating IPspaces
          Creating broadcast domains
          Creating subnets
        Setting up physical storage
          Assigning disks to nodes
          Zeroing spare disks
          Provisioning storage through aggregates
            Provisioning storage by creating an aggregate
            Provisioning storage by creating a Flash Pool aggregate
            Provisioning storage by creating a SnapLock aggregate
            Provisioning storage by creating a FabricPool
        Setting up logical storage
          Creating SVMs
            Configuring CIFS and NFS protocols on an SVM
            Configuring iSCSI protocol on SVMs
            Configuring FC and FCoE protocols on SVMs
            Delegating administration to SVM administrators
          Creating FlexVol volumes
          Creating SnapLock volumes
    Managing clusters
      What a cluster is
      Understanding quorum and epsilon
      What a node in the cluster is
      Dashboard window
        Monitoring a cluster using the dashboard
      Applications
      Configuration update
        Configuring the administration details of an SVM
        Configuration Updates window
      Service Processors
        Assigning IP addresses to Service Processors
        Editing Service Processor settings
        Understanding the Service Processor
        Service Processors window
      Cluster peers
        Prerequisites for cluster peering
        Creating cluster peer relationships
        Modifying the cluster peer passphrase
        Modifying the peer network parameters
        Deleting cluster peer relationships
        What a cluster peer is
        What cluster peer intercluster connectivity is
        Connecting one cluster to another cluster in a peer relationship
        Peers window
      High availability
        Understanding HA pairs
        High Availability window
      Licenses
        Deleting licenses
        Managing licenses
        License types and entitlement risk
        Licenses window
      Cluster Expansion
        Adding nodes to a cluster
        Configuring the network details of the nodes
      Cluster update
        Updating the cluster nondisruptively
          Obtaining ONTAP software images
        How you update a cluster nondisruptively
        Cluster Update window
      Date and time
        Managing the cluster time
        Date and Time window
      SNMP
        Enabling or disabling SNMP
        Setting SNMP information
        Enabling or disabling SNMP traps
        Testing the trap host configuration
        Options to use when configuring SNMP
        Managing SNMP on the cluster
        SNMP window
      LDAP
        Viewing the LDAP client configuration
        Using LDAP services
        LDAP window
      Users
        Adding a cluster user account
        Editing a cluster user account
        Changing passwords for cluster user accounts
        Locking or unlocking cluster user accounts
        User accounts (cluster administrators only)
        Roles
        Users window
      Roles
        Adding roles
        Editing roles
        Roles and permissions
        Predefined roles for cluster administrators
        Roles window
    Managing the network
      IPspaces
        Editing IPspaces
        Deleting IPspaces
        Configuring IPspaces
        Standard properties of IPspaces
      Broadcast domains
        Editing broadcast domains
        Deleting broadcast domains
        Configuring broadcast domains
      Subnets
        Editing subnets
        Deleting subnets
      Network interfaces
        Creating network interfaces
        Editing network interfaces
        Deleting network interfaces
        Migrating a LIF
        What LIFs are
        Roles for LIFs
        Guidelines for creating LIFs
      Ethernet ports
        Creating interface groups
        Creating VLAN interfaces
        Editing Ethernet port settings
        Editing interface group settings
        Editing the MTU size of a VLAN
        Deleting VLANs
        Ports and adapters
        Types of network ports
        How VLANs work
      FC/FCoE adapters
        Editing the FC/FCoE adapter speed
        Configuring subnets
      Network window
    Managing physical storage
      Storage Tiers
        Adding an external capacity tier
        Attaching an aggregate to external capacity tier
        Deleting an external capacity tier
        Editing an external capacity tier
        Editing aggregates
        Deleting aggregates
        Changing the RAID configuration when creating an aggregate
        Provisioning cache by adding SSDs
          Provisioning cache to aggregates by adding SSDs
          Increasing the cache for Flash Pool aggregates by adding SSDs
        Adding capacity disks
        Changing the RAID group when adding capacity disks
        Moving FlexVol volumes
        Mirroring aggregates
        Viewing aggregate information
        Understanding aggregates
        Installing a CA certificate if you use StorageGRID Webscale
        How RAID groups are named
        How moving a FlexVol volume works
        How Flash Pool aggregates work
        How you can use effective ONTAP disk type for mixing HDDs
        What compatible spare disks are
        How System Manager works with hot spares
        Rules for displaying disk types and disk RPM
        How mirrored aggregates work
        What external capacity tiers and tiering policies are
        What a FabricPool is
        Storage Tiers window
      Aggregates
        Aggregates window
      Storage pools
        Creating a storage pool
        Adding disks to a storage pool
        Deleting storage pools
        How you use SSD storage pools
        How Flash Pool SSD partitioning increases cache allocation flexibility for Flash Pool aggregates
        Requirements and best practices for using SSD storage pools
        Considerations for when to use SSD storage pools
        Considerations for adding SSDs to an existing storage pool versus creating a new one
        Why you add disks to storage pools
        How storage pool works
        Storage Pools window
      Disks
        Reassigning disks to nodes
        Viewing disk information
        Understanding RAID drive types
        How ONTAP reports disk types
        How hot spare disks work
        RAID protection for array LUNs
        Minimum number of hot spares you should have
        Spare requirements for multi-disk carrier disks
        Shelf configuration requirements for multi-disk carrier storage shelves
        How to determine when it is safe to remove a multi-disk carrier
        Considerations for sizing RAID groups
        Considerations for ONTAP RAID groups for array LUNs
        Disks window
      Array LUNs
        Assigning array LUNs
        Reassigning spare array LUNs to nodes
        Zeroing spare array LUNs
        About disks and array LUNs
        How disks and array LUNs become available for use
        Rules for mixing array LUNs in an aggregate
        Array LUNs window
      Nodes
        Initializing the ComplianceClock time
        Nodes window
      Flash Cache
        Enabling or disabling Flash Cache
        How Flash Cache works
        Flash Cache window
      Events
        Events window
      System alerts
        Monitoring the health of your system
        Acknowledging system health alerts
        Suppressing system health alerts
        Deleting system health alerts
        Available cluster health monitors
        Ways to respond to system health alerts
        System Alerts window
      AutoSupport notifications
        Setting up AutoSupport notifications
        Enabling or disabling AutoSupport settings
        Adding AutoSupport email recipients
        Testing AutoSupport settings
        Generating AutoSupport data
        Viewing AutoSupport summary
        AutoSupport severity types
        AutoSupport window
      Jobs
        Jobs
        Job window
      Flash Pool statistics
        Flash Pool aggregate Statistics window
    Managing logical storage
      Storage Virtual Machines
        SVM Dashboard window
        Monitoring SVMs
        Editing SVM settings
        Deleting SVMs
        Starting SVMs
        Stopping SVMs
        What SVMs are
        Managing SVMs
        Types of SVMs
        Why you use SVMs
        How ONTAP name service switch configuration works
        Storage Virtual Machines window
      Volumes
        Editing the volume properties
        Editing data protection volumes
        Deleting volumes
        Creating FlexClone volumes
        Creating FlexClone files
        Splitting a FlexClone volume from its parent volume
        Viewing the FlexClone volume hierarchy
        Changing the status of a volume
        Viewing the Snapshot copies
        Creating Snapshot copies
        Setting the Snapshot copy reserve
        Hiding the Snapshot copy directory
        Scheduling automatic Snapshot copies
        Restoring a volume from a Snapshot copy
        Extending the expiry date of Snapshot copies
        Renaming Snapshot copies
        Deleting Snapshot copies
        Resizing volumes
        Enabling storage efficiency on a volume
        Changing the deduplication schedule
        Running deduplication operations
        Moving FlexVol volumes between aggregates or nodes
          Manually triggering the cutover for volume move
        Assigning volumes to Storage QoS
        Creating a mirror relationship from a source SVM
        Creating a vault relationship from a source SVM
        Creating a mirror and vault relationship from a source SVM
        Creating an NFS datastore for VMware
        Changing the tiering policy of a volume
        Creating FlexGroup volumes
        Editing FlexGroup volumes
        Resizing FlexGroup volumes
        Changing the status of a FlexGroup volume
        Deleting FlexGroup volumes
        Viewing FlexGroup volume information
        What volume granular encryption is
        How FlexVol volumes work
        Considerations for creating a FlexClone volume from a SnapMirror source or destination volume
        Snapshot configuration
        How volume guarantees work for FlexVol volumes
        FlexClone volumes and space guarantees
        Thin provisioning for greater efficiencies using FlexVol volumes
        Using space reservations with FlexVol volumes
        Benefits of storage efficiency
        Data compression and deduplication
        Guidelines for using deduplication
        Options for resizing volumes
        Considerations when moving volumes
        How moving a FlexVol volume works
        Volumes window
      Namespace
        Mounting volumes
        Unmounting FlexVol volumes
        Changing export policies
        Namespace window
      Shares
        Creating a CIFS share
        Stopping share access
        Creating home directory shares
        Editing share settings
        How ONTAP enables dynamic home directories
        Shares window
      LUNs
        Creating FC SAN optimized LUNs
        Application-specific LUN settings
        Creating LUNs
        Deleting LUNs
        Creating initiator groups
        Deleting initiator groups
        Adding initiators
        Deleting initiators from an initiator group
        Creating port sets
        Deleting port sets
        Cloning LUNs
        Editing LUNs
        Bringing LUNs online
        Taking LUNs offline
        Moving LUNs
        Assigning LUNs to Storage QoS
        Editing initiator groups
        Editing initiators
        Editing port sets
        Viewing LUN information
        Viewing initiator groups
        Guidelines for working with FlexVol volumes that contain LUNs
        LUN size and type
        Understanding space reservations for LUNs
        Guidelines for using LUN multiprotocol type
        Understanding LUN clones
        Resizing a LUN
        Initiator hosts
        VMware RDM
        What igroups are
        Required information for creating igroups
        igroup name
        igroup type
        igroup ostype
        Ways to limit LUN access with port sets and igroups
        LUNs window
      Qtrees
        Creating qtrees
        Deleting qtrees
        Editing qtrees
        Assigning export policies to qtrees
        Viewing qtree information
        What a qtree is
        Qtree options
        Security styles
        Qtrees window
      Quotas
        Creating quotas
        Deleting quotas
        Editing quota limits
        Activating or deactivating quotas
        Resizing quotas
        Viewing quota information
        Types of quotas
        Quota limits
        Quota management
        How qtree changes affect quotas
        How changing the security style of a qtree affects user quotas
        How quotas work with users and groups
        Quotas window
      CIFS protocol
        Setting up CIFS
        Editing the general properties for CIFS
        Adding home directory paths
        Deleting home directory paths
        Resetting CIFS domain controllers
        Updating the CIFS group policy configuration
        Enabling or disabling a CIFS group policy configuration
        Reloading CIFS group policy
        Setting up BranchCache
        Modifying the BranchCache settings
        Deleting the BranchCache configuration
        Adding preferred domain controllers
        Editing preferred domain controllers
        Deleting preferred domain controllers
        Viewing CIFS domain information
        SMB concepts
        How ONTAP enables you to provide SMB client access to UNIX symbolic links
        Using BranchCache to cache SMB share content at a branch office
        What happens when you delete the BranchCache configuration
        CIFS window
      NFS protocol
        Editing NFS settings
        How ONTAP handles NFS client authentication
        NFS window
      iSCSI protocol
        Creating iSCSI aliases
        Enabling or disabling the iSCSI service on storage system interfaces
        Adding the security method for iSCSI initiators
        Editing default security settings
        Editing initiator security
        Changing the default iSCSI initiator authentication method
        Setting the default security for iSCSI initiators
        Starting or stopping the iSCSI service
        Viewing initiator security information
        What iSCSI is
        What iSCSI nodes are
        Initiator security
        What CHAP authentication is
        iSCSI window
      FC/FCoE protocol
        Starting or stopping the FC or FCoE service
        Changing an FC or FCoE node name
        What FC is
        What FC nodes are
        The FCoE protocol
        FC/FCoE window
      Export policies
        Creating an export policy
        Renaming export policies
        Deleting export policies
        Adding rules to an export policy
        Modifying export policy rules
        Deleting export policy rules
        How export policies control client access to volumes or qtrees
        Export Policies window
      Efficiency policies
        Adding efficiency policies
        Editing efficiency policies
        Deleting efficiency policies
        Enabling or disabling efficiency policies
        What an efficiency policy is
        Understanding predefined efficiency policies
        Efficiency Policies window
      Protection policies
        Creating protection policies
        Deleting protection policies
        Editing protection policies
        Configuring SnapMirror policies
        Protection Policies window
      QoS policy groups
        Creating QoS policy groups
        Deleting QoS policy groups
        Editing QoS policy groups
        Managing workload performance by using Storage QoS
        How Storage QoS works
        How the maximum throughput limit works
        Rules for assigning storage objects to policy groups
        QoS Policy Groups window
      NIS services
        Adding NIS domains
        Editing NIS domains
        Managing NIS domains
        NIS window
      LDAP client services
        Adding an LDAP client configuration
        Deleting an LDAP client configuration
        Editing an LDAP client configuration
        LDAP Client window
      LDAP configuration services
        Editing active LDAP clients
        Deleting active LDAP clients
        LDAP Configuration window
      Kerberos realm services
        Creating a Kerberos realm configuration
        Editing a Kerberos realm configuration
        Deleting Kerberos realm configurations
        Using Kerberos with NFS for strong security
        Kerberos authentication for CIFS
        Kerberos Realm window
      Kerberos interface services
        Editing Kerberos configuration
        Kerberos Interface window
      DNS/DDNS Services
        Enabling or disabling DNS and DDNS
        Editing DNS and DDNS settings
        DNS/DDNS Services window
      Users
        Adding SVM user accounts
        Changing the password for SVM user accounts
        Editing SVM user accounts
        Locking or unlocking SVM user accounts
        Users window
      Roles
        Adding roles
        Editing roles
        Predefined roles for SVM administrators
        Roles window
      UNIX
        UNIX window
      Windows
        Creating a local Windows group
        Editing local Windows group properties
        Adding user accounts to a Windows local group
        Renaming a local Windows group
        Deleting a local Windows group
        Creating a local Windows user account
        Editing the local Windows user properties
        Assigning group memberships to a user account
        Renaming a local Windows user
        Resetting the password of a Windows local user
        Deleting a local Windows user account
        Using local users and groups for authentication and authorization
        Local users and groups concepts
        Reasons for creating local users and local groups
        What local privileges are
        List of supported privileges
        Predefined BUILTIN groups and default privileges
        Windows window
      Name mapping
        Configuring name mappings
        How name mapping works
        Name mapping conversion rules
        Name Mapping window
    Managing data protection
      Mirror relationships
        Creating a mirror relationship from a destination SVM
        Deleting mirror relationships
        Editing mirror relationships
        Initializing mirror relationships
        Updating mirror relationships
        Quiescing mirror relationships
        Resuming mirror relationships
        Breaking SnapMirror relationships
        Resynchronizing mirror relationships
        Reverse resynchronizing mirror relationships
        Aborting a mirror transfer
        Restoring a volume in a mirror relationship
        Components of a mirror relationship
        How SnapMirror works
        Uses for data protection mirror copies
      Vault relationships
        Creating a vault relationship from a destination SVM
        Deleting vault relationships
        Editing vault relationships
        Initializing a vault relationship
        Updating a vault relationship
        Quiescing a vault relationship
        Resuming a vault relationship
        Aborting a Snapshot copy transfer
        Restoring a volume in a vault relationship
        What a SnapVault backup is
        How a SnapVault backup works
        Which data gets backed up and restored from a SnapVault backup
        How SnapVault backups work with data compression
        SnapVault backup limitations
        Guidelines for planning Snapshot copy schedule and retention for SnapVault backups
        Data protection for SVM namespace and root information
      Mirror and vault relationships
        Creating a mirror and vault relationship from a destination SVM
        Deleting mirror and vault relationships
        Editing mirror and vault relationships
        Initializing mirror and vault relationships
        Updating mirror and vault relationships
        Quiescing mirror and vault relationships
        Resuming mirror and vault relationships
        Breaking mirror and vault relationships
        Resynchronizing mirror and vault relationships
        Reverse resynchronizing mirror and vault relationships
        Aborting mirror and vault relationships
        Restoring a volume in a mirror and vault relationship
      What lag time is
      Types of data protection relationships
      Protection window
      Snapshot policies
        Creating Snapshot policies
        Editing Snapshot policies
        Deleting Snapshot policies
        About Snapshot policies
        Snapshot Policies window
      Schedules
        Creating schedules
        Editing schedules
        Deleting schedules
        Schedules
        Schedules window
  Cluster management workflows using System Manager 9.5 to 9.7
    ONTAP System Manager workflows
    Setting up a cluster by using ONTAP System Manager
      Setting up a cluster by using the template file
      Setting up the cluster manually
        Creating a cluster
        Setting up a network
          Setting up a network when an IP address range is enabled
          Setting up a network when an IP address range is disabled
        Setting up a support page
        Reviewing storage recommendations
        Creating an SVM
    Setting up the network
      Creating VLAN interfaces
      Creating interface groups
      Creating broadcast domains
      Creating subnets
      Creating network interfaces
    Assigning disks or array LUNs to nodes
      Assigning disks to nodes
      Zeroing spare disks
      Assigning array LUNs
      Zeroing spare array LUNs
    Managing FlexGroup volumes using System Manager
      Creating FlexGroup volumes
    Resizing FlexGroup volumes using System Manager
      Resizing FlexGroup volumes
    Assigning disks to existing aggregates
      Adding capacity disks
      Provisioning cache to aggregates by adding SSDs
      Creating a storage pool
    Provisioning cache through Flash Pool aggregates
      Provisioning cache to aggregates by adding SSDs
      Increasing the cache for Flash Pool aggregates by adding SSDs
      Creating a storage pool
    Providing data resiliency by mirroring aggregates
      Provisioning storage through aggregates
        Provisioning storage by creating an aggregate manually
        Provisioning storage by creating a Flash Pool aggregate manually
      Mirroring aggregates
    Providing data access to qtrees using export policies
      Creating qtrees
      Assigning export policies to qtrees
      Creating an export policy
      Adding rules to an export policy
    Configuring a Service Processor
      Assigning IP addresses to Service Processors
      Editing Service Processor settings
    Setting up a BranchCache configuration
      Setting up CIFS
      Setting up BranchCache
      Editing share settings
    Protecting data using mirror and vault relationship
      Creating a mirror and vault relationship from a source SVM
      Creating a mirror and vault relationship from a destination SVM
    Protecting data using SnapLock
      Adding licenses
      Provisioning storage by creating a SnapLock aggregate manually
      Creating SnapLock volumes
      Mounting volumes
      Creating a mirror or vault relationship from a source or destination SVM
        Creating a mirror relationship from a source SVM
        Creating a mirror relationship from a destination SVM
        Creating a vault relationship from a source SVM
        Creating a vault relationship from a destination SVM
  Cluster management workflows using System Manager 9.3 and 9.4
    OnCommand System Manager workflows
    Setting up a cluster by using OnCommand System Manager
      Setting up a cluster by using the template file
      Setting up the cluster manually
        Creating a cluster
        Setting up a network
          Setting up a network when an IP address range is enabled
          Setting up a network when an IP address range is disabled
        Setting up a support page
        Reviewing storage recommendations
        Creating an SVM
    Setting up the network
      Creating VLAN interfaces
      Creating interface groups
      Creating broadcast domains
      Creating subnets
      Creating network interfaces
    Assigning disks or array LUNs to nodes
      Assigning disks to nodes
      Zeroing spare disks
      Assigning array LUNs
      Zeroing spare array LUNs
    Managing FlexGroup volumes using System Manager
      Creating FlexGroup volumes
    Resizing FlexGroup volumes using System Manager
      Resizing FlexGroup volumes
    Assigning disks to existing aggregates
      Adding capacity disks
      Provisioning cache to aggregates by adding SSDs
      Creating a storage pool
    Provisioning cache through Flash Pool aggregates
      Provisioning cache to aggregates by adding SSDs
      Increasing the cache for Flash Pool aggregates by adding SSDs
      Creating a storage pool
    Providing data resiliency by mirroring aggregates
      Provisioning storage through aggregates
        Provisioning storage by creating an aggregate manually
        Provisioning storage by creating a Flash Pool aggregate manually
      Mirroring aggregates
    Providing data access to qtrees using export policies
      Creating qtrees
      Assigning export policies to qtrees
      Creating an export policy
      Adding rules to an export policy
    Configuring a Service Processor
      Assigning IP addresses to Service Processors
      Editing Service Processor settings
    Setting up a BranchCache configuration
      Setting up CIFS
      Setting up BranchCache
      Editing share settings
    Protecting data using mirror and vault relationship
      Creating a mirror and vault relationship from a source SVM
      Creating a mirror and vault relationship from a destination SVM
    Protecting data using SnapLock
      Adding licenses
      Provisioning storage by creating a SnapLock aggregate manually
      Creating SnapLock volumes
      Mounting volumes
      Creating a mirror or vault relationship from a source or destination SVM
        Creating a mirror relationship from a source SVM
        Creating a mirror relationship from a destination SVM
        Creating a vault relationship from a source SVM
        Creating a vault relationship from a destination SVM
  Cluster management workflows using System Manager 9.2 and earlier
    OnCommand System Manager workflows
    Setting up a cluster by using OnCommand System Manager
      Setting up a cluster by using the template file
      Setting up the cluster manually
        Creating a cluster
        Setting up a network
          Setting up a network when an IP address range is enabled
          Setting up a network when an IP address range is disabled
        Setting up a support page
        Reviewing storage recommendations
        Creating an SVM
    Performing a nondisruptive cluster update
      Obtaining ONTAP software images
      Updating the cluster nondisruptively
    Setting up the network
      Creating VLAN interfaces
      Creating interface groups
      Creating broadcast domains
      Creating subnets
      Creating network interfaces
    Assigning disks or array LUNs to nodes
      Assigning disks to nodes
      Zeroing spare disks
      Assigning array LUNs
      Zeroing spare array LUNs
    Managing storage tiers by using FabricPool
      Adding an external capacity tier
      Attaching an aggregate to external capacity tier
      Provisioning storage by creating a FabricPool
      Changing the tiering policy of a volume
    Managing FlexGroup volumes using System Manager
      Creating FlexGroup volumes
    Resizing FlexGroup volumes using System Manager
      Resizing FlexGroup volumes
    Assigning disks to existing aggregates
      Adding capacity disks
      Provisioning cache to aggregates by adding SSDs
      Creating a storage pool
    Provisioning cache through Flash Pool aggregates
      Provisioning cache to aggregates by adding SSDs
      Increasing the cache for Flash Pool aggregates by adding SSDs
      Creating a storage pool
    Providing data resiliency by mirroring aggregates
      Provisioning storage through aggregates
        Provisioning storage by creating an aggregate
        Provisioning storage by creating a Flash Pool aggregate
      Mirroring aggregates
    Providing data access to qtrees using export policies
      Creating qtrees
      Assigning export policies to qtrees
      Creating an export policy
      Adding rules to an export policy
    Configuring a Service Processor
      Assigning IP addresses to Service Processors
      Editing Service Processor settings
    Setting up a BranchCache configuration
      Setting up CIFS
      Setting up BranchCache
      Editing share settings
    Protecting data using mirror and vault relationship
      Creating a mirror and vault relationship from a source SVM
      Creating a mirror and vault relationship from a destination SVM
    Protecting data using SnapLock
      Adding licenses
      Provisioning storage by creating a SnapLock aggregate
      Creating SnapLock volumes
      Mounting volumes
      Creating a mirror or vault relationship from a source or destination SVM
        Creating a mirror relationship from a source SVM
        Creating a mirror relationship from a destination SVM
        Creating a vault relationship from a source SVM
        Creating a vault relationship from a destination SVM
  Disk and aggregate management
    Deciding whether to use this guide
    Aggregate creation workflow
      Deciding which aggregate creation method to use
      Creating aggregates with auto-provision
      Default RAID policies for aggregates
      How to determine the number of disks or disk partitions required for an aggregate
      Creating aggregates manually
    Aggregate expansion workflow
      Adding drives to a node or shelf
      Manually assigning disk ownership
      Fast zeroing of drives
      Expanding aggregates
    Managing aggregates
      RAID protection levels for disks
      How to determine the number of disks or disk partitions required for an aggregate
      Correcting misaligned spare partitions
      Determining drive and RAID group information for an aggregate
      Relocating aggregate ownership within an HA pair
        Relocating aggregate ownership
        Commands for aggregate relocation
      Assigning aggregates to SVMs
      How to determine space usage in an aggregate
      Determining which volumes reside on an aggregate
      How you can determine and control a volume's space usage in the aggregate
      Methods to create space in an aggregate
      Commands for managing aggregates
    Working with Flash Pool aggregates
      Flash Pool caching policies and SSD partitioning
        How Flash Pool aggregate caching policies work
        How Flash Pool SSD partitioning works for Flash Pool aggregates using storage pools
      Determining Flash Pool candidacy and optimal cache size
      Creating a Flash Pool aggregate using physical SSDs
      Creating a Flash Pool aggregate using SSD storage pools
        Determining whether a Flash Pool aggregate is using an SSD storage pool
        Creating an SSD storage pool
        Creating a Flash Pool aggregate using SSD storage pool allocation units
        Determining the impact to cache size of adding SSDs to an SSD storage pool
        Adding SSDs to an SSD storage pool
        Commands for managing SSD storage pools
      Determining whether to modify the caching policy of Flash Pool aggregates
        Modifying caching policies of Flash Pool aggregates
        Setting the cache-retention policy for Flash Pool aggregates
    Managing disks
      When you need to update the Disk Qualification Package
      How hot spare disks work
      How low spare warnings can help you manage your spare disks
      Displaying disk and partition ownership
      Manually assigning ownership of partitioned disks
        Manually assigning disks with root-data partitioning
        Manually assigning disks with root-data-data partitioning
      Additional root-data partitioning management options
      Configuring automatic assignment of disk ownership
        Which disk autoassignment policy to use
      Removing a failed disk
      Removing ownership from a disk
      Sanitizing a disk
      Sanitizing a disk in maintenance mode
      Setting up an active-passive configuration on nodes using root-data partitioning
      Setting up an active-passive configuration on nodes using root-data-data partitioning
      Commands for managing disks
      Commands for displaying space usage information
      Commands for displaying information about storage shelves
    Managing RAID groups
      Converting from RAID-DP to RAID-TEC
      Converting RAID-TEC to RAID-DP
      Considerations for sizing RAID groups
      Customizing the size of your RAID groups
    Appendix: Mirrored and unmirrored aggregates
      How unmirrored aggregates work
      How mirrored aggregates work
    Where to find additional information
  High-availability configuration
    Deciding whether to use this guide
    Planning your HA pair configuration
      Best practices for HA pairs
      Setup requirements and restrictions for standard HA pairs
      Setup requirements and restrictions for mirrored HA pairs
      Requirements for hardware-assisted takeover
      If your cluster consists of a single HA pair
      Storage configuration variations for HA pairs
      HA pairs and storage system model types
        Single-chassis and dual-chassis HA pairs
        Interconnect cabling for systems with variable HA configurations
        HA configuration and the HA state PROM value
    Requirements for cabling HA pair
      System cabinet or equipment rack installation
        HA pairs in an equipment rack
        HA pairs in a system cabinet
      Required documentation
      Required tools
      Required equipment
      Preparing your equipment
        Installing the nodes in equipment racks
        Installing the nodes in a system cabinet
      Cabling a standard HA pair
        Cabling the HA interconnect (all systems except 32xx or 80xx in separate chassis)
        Cabling the HA interconnect (32xx systems in separate chassis)
        Cabling the HA interconnect (80xx systems in separate chassis)
      Cabling a mirrored HA pair
        Cabling the HA interconnect (all systems except 32xx or 80xx in separate chassis)
        Cabling the HA interconnect (32xx systems in separate chassis)
        Cabling the HA interconnect (80xx systems in separate chassis)
      Required connections for using uninterruptible power supplies with standard or mirrored HA pairs
    Configuring an HA pair
      Verifying and setting the HA state on the controller modules and chassis
      Setting the HA mode and enabling storage failover
        Commands for setting the HA mode
        Commands for enabling and disabling storage failover
      Enabling cluster HA and switchless-cluster in a two-node cluster
      Checking for common configuration errors using Config Advisor
      Configuring hardware-assisted takeover
        Commands for configuring hardware-assisted takeover
        System events that trigger hardware-assisted takeover
      Configuring automatic takeover
        Commands for controlling automatic takeover
        System events that result in an automatic takeover
      Configuring automatic giveback
        Commands for configuring automatic giveback
        How variations of the storage failover modify command affect automatic giveback
      Testing takeover and giveback
    Monitoring an HA pair
      Commands for monitoring an HA pair
      Description of node states displayed by storage failover show-type commands
    Halting or rebooting a node without initiating takeover
      Commands for halting or rebooting a node without initiating takeover
      Halting or rebooting a node without initiating takeover in a two-node cluster
    Performing a manual takeover
      Commands for performing and monitoring manual takeovers
      Moving epsilon for certain manually initiated takeovers
    Performing a manual giveback
      If giveback is interrupted
      If giveback is vetoed
      Commands for performing a manual giveback
    Nondisruptive operations with HA pairs
      Where to find procedures for nondisruptive operations with HA pairs
    Relocating aggregate ownership within an HA pair
      Relocating aggregate ownership
      Commands for aggregate relocation
    Appendix: Understanding takeover and giveback
      When takeovers occur
      How hardware-assisted takeover speeds up takeover
      How automatic takeover and giveback work
      What happens during takeover
      What happens during giveback
      HA policy and how it affects takeover and giveback operations
      Background disk firmware update and takeover, giveback, and aggregate relocation
      Types of disk ownership
  Managing storage tiers
    Deciding whether to use the Managing Storage Tiers By Using FabricPool Guide
    Managing storage tiers by using FabricPool
      Benefits of storage tiers by using FabricPool
      Considerations and requirements for using FabricPool
      Understanding FabricPool tiering policies
      FabricPool management workflow
      Configuring FabricPool
        Preparing for FabricPool configuration
          Installing a FabricPool license
            Installing a FabricPool license (video)
          Installing a CA certificate if you use StorageGRID
          Installing a CA certificate if you use ONTAP S3
        Setting up an object store as the cloud tier for FabricPool
          Setting up StorageGRID as the cloud tier
            Attaching StorageGRID as a FabricPool cloud tier (video)
          Setting up ONTAP S3 as the cloud tier
          Setting up Alibaba Cloud Object Storage as the cloud tier
          Setting up AWS S3 as the cloud tier
            Attaching AWS S3 as a FabricPool cloud tier (video)
          Setting up Google Cloud Storage as the cloud tier
          Setting up IBM Cloud Object Storage as the cloud tier
          Setting up Azure Blob Storage for the cloud as the cloud tier
          Setting up object stores for FabricPool in a MetroCluster configuration
        Attaching the cloud tier to an aggregate
      Managing FabricPool
        Determining how much data in a volume is inactive by using inactive data reporting
        Adding or moving volumes to FabricPool as needed
          Creating a volume for FabricPool
          Moving a volume to FabricPool
        Object tagging using user-created custom tags
          Assigning a new tag during volume creation
          Modifying an existing tag
          Deleting a tag
          Viewing existing tags on a volume
          Checking object tagging status on FabricPool volumes
        Monitoring the space utilization for FabricPool
        Managing storage tiering by modifying a volume's tiering policy or tiering minimum cooling period
          Archiving volumes with FabricPool (video)
        Using cloud migration controls to override a volume's default tiering policy
        Promoting data to the performance tier
          Promoting all data from a FabricPool volume to the performance tier
          Promoting file system data to the performance tier
          Checking the status of a performance tier promotion
          Triggering scheduled migration and tiering
      Managing FabricPool mirrors
        Creating a FabricPool mirror
        Monitoring FabricPool mirror resync status
        Displaying FabricPool mirror details
        Promoting a FabricPool mirror
        Removing a FabricPool mirror
        Replacing an existing object store using a FabricPool mirror
        Replacing a FabricPool mirror on a MetroCluster configuration
      Commands for managing aggregates with FabricPool
  System administration
    Deciding whether to use this guide
    Cluster and SVM administrators
      What the cluster management server is
      Types of SVMs
    ONTAP management interface basics
      Accessing the cluster by using the CLI
        Accessing the cluster by using the serial port
        Accessing the cluster by using SSH
        SSH login security
        Enabling Telnet or RSH access to the cluster
        Accessing the cluster by using Telnet
        Accessing the cluster by using RSH
      Using the ONTAP command-line interface
        Understanding the different shells for CLI commands
          Access of nodeshell commands and options in the clustershell
          Displaying available nodeshell commands
        Methods of navigating CLI command directories
        Rules for specifying values in the CLI
        Methods of viewing command history and reissuing commands
        Keyboard shortcuts for editing CLI commands
        Use of administrative privilege levels
        Setting the privilege level in the CLI
        Setting display preferences in the CLI
        Methods of using query operators
        Methods of using extended queries
        Methods of customizing show command output by using fields
        Understanding positional parameters
        Methods of accessing ONTAP man pages
      Managing CLI sessions
        Managing records of CLI sessions
          Recording a CLI session
          Commands for managing records of CLI sessions
        Managing the automatic timeout period of CLI sessions
          Commands for managing the automatic timeout period of CLI sessions
      Accessing a cluster by using the ONTAP System Manager browser-based graphic interface
        Understanding ONTAP System Manager
        Ways to manage access to ONTAP System Manager
    Cluster management basics (cluster administrators only)
      Displaying information about the nodes in a cluster
      Displaying cluster attributes
      Modifying cluster attributes
      Displaying the status of cluster replication rings
      Understanding quorum and epsilon
      What system volumes are
    Managing nodes
      Displaying node attributes
      Modifying node attributes
      Renaming a node
      Adding nodes to the cluster
      Removing nodes from the cluster
      Accessing a node's log, core dump, and MIB files by using a web browser
      Accessing the system console of a node
      Rules governing node root volumes and root aggregates
        Freeing up space on a node’s root volume
        Relocating root volumes to new aggregates
      Starting or stopping a node
        Rebooting a node at the system prompt
        Booting ONTAP at the boot environment prompt
        Shutting down a node
      Managing a node by using the boot menu
      Managing a node remotely using the SP/BMC
        Understanding the SP
        What the Baseboard Management Controller does
        Configuring the SP/BMC network
          Isolating management network traffic
          Considerations for the SP/BMC network configuration
          Enabling the SP/BMC automatic network configuration
          Configuring the SP/BMC network manually
          Modifying the SP API service configuration
        Methods of managing SP/BMC firmware updates
          When the SP/BMC uses the network interface for firmware updates
        Accessing the SP/BMC
          Accounts that can access the SP
          Accessing the SP/BMC from an administration host
          Accessing the SP/BMC from the system console
          Relationship among the SP CLI, SP console, and system console sessions
          Managing the IP addresses that can access the SP
        Using online help at the SP/BMC CLI
        Commands for managing a node remotely
          Understanding the threshold-based SP sensor readings and status values of the system sensors command output
          Understanding the discrete SP sensor status values of the system sensors command output
        Commands for managing the SP from ONTAP
        ONTAP commands for BMC management
        BMC CLI commands
    Managing audit logging for management activities
      Changes to audit logging in ONTAP 9
      How ONTAP implements audit logging
      Forwarding the audit log to a destination
      Commands for managing audit settings for management activities
    Managing the cluster time
      Commands for managing the cluster time
    Managing the banner and MOTD
      Creating a banner
      Managing the banner
      Creating an MOTD
      Managing the MOTD
    Managing licenses
      License types and licensed method
      Commands for managing licenses
    Managing jobs and schedules
      Job categories
      Commands for managing jobs
      Commands for managing job schedules
    Backing up and restoring cluster configurations
      What configuration backup files are
      Managing configuration backups
        How the node and cluster configurations are backed up automatically
        Commands for managing configuration backup schedules
        Commands for managing configuration backup files
      Recovering a node configuration
        Finding a configuration backup file to use for recovering a node
        Restoring the node configuration using a configuration backup file
      Recovering a cluster configuration
        Finding a configuration to use for recovering a cluster
        Restoring a cluster configuration from an existing configuration
      Synchronizing a node with the cluster
    Managing core dumps
      Commands for managing core dumps
    Monitoring a storage system
      Using AutoSupport and Active IQ Digital Advisor
        Managing AutoSupport
          When and where AutoSupport messages are sent
          How AutoSupport creates and sends event-triggered messages
          Types of AutoSupport messages and their content
          What AutoSupport subsystems are
          AutoSupport size and time budgets
          Files sent in event-triggered AutoSupport messages
          Log files sent in AutoSupport messages
          Files sent in weekly AutoSupport messages
          How AutoSupport obtains delivery instructions from technical support
          Structure of AutoSupport messages sent by email
          AutoSupport severity types
          Requirements for using AutoSupport
          Setting up AutoSupport
          Uploading core dump files
          Uploading performance archive files
          Getting AutoSupport message descriptions
          Commands for managing AutoSupport
          Information included in the AutoSupport manifest
          AutoSupport case suppression during scheduled maintenance windows
          Troubleshooting AutoSupport
            Troubleshooting AutoSupport when messages are not received
            Troubleshooting AutoSupport message delivery over HTTP or HTTPS
            Troubleshooting AutoSupport message delivery over SMTP
            Troubleshooting the AutoSupport subsystem
      Monitoring the health of your system
        How health monitoring works
          Ways to respond to system health alerts
          System health alert customization
          How health alerts trigger AutoSupport messages and events
        Available cluster health monitors
        Receiving system health alerts automatically
        Responding to degraded system health
          Example of responding to degraded system health
        Configuring discovery of cluster and management network switches
        Verifying the monitoring of cluster and management network switches
        Commands for monitoring the health of your system
      Displaying environmental information
    Managing access to web services
      Managing the web protocol engine
        Commands for managing the web protocol engine
      Configuring SAML authentication for web services
        Configuring SAML authentication
        Disabling SAML authentication
        Troubleshooting issues with SAML configuration
      Managing web services
        Commands for managing web services
        Commands for managing mount points on the nodes
      Managing SSL
        Commands for managing SSL
      Configuring access to web services
        Troubleshooting web service access problems
    Verifying the identity of remote servers using certificates
      Verifying digital certificates are valid using OCSP
      Viewing default certificates for TLS-based applications
      Mutually authenticating the cluster and a KMIP server
        Generating a certificate signing request for the cluster
        Installing a CA-signed server certificate for the cluster
        Installing a CA-signed client certificate for the KMIP server
  Cluster expansion express configuration
    Deciding whether to use this guide
    Cluster expansion workflow
      Verifying the cluster is ready for expansion
        Verifying the planned configuration
        Gathering the required network information
        Adding or replacing switches
      Preparing the cluster for expansion
        Adding node-locked licenses
        Verifying the health of the system
        Backing up the cluster configuration
        Generating an AutoSupport message about starting expansion
      Installing the new nodes
        Installing the controllers
        Configuring node-management LIFs
        Upgrading or downgrading the nodes
        Ensuring hardware-level HA is enabled
        Adding nodes to a cluster using System Manager
        Joining nodes to the cluster using the CLI
      Completing the expansion
        Configuring the node details in System Manager
        Configuring AutoSupport on the new nodes
        Configuring the Service Processor network
        Validating the configuration of the expanded cluster
        Generating an AutoSupport message about completing expansion
        Updating LUN paths for the new nodes
    Where to find additional information
  Cluster management using System Manager 9.6 and 9.7
    Understanding System Manager
    Icons used in the application interface
    System Manager window layout
    Window layout customization
    ONTAP System Manager enhancements
    Setting up your cluster environment
      Setting up the cluster by using ONTAP System Manager
        Setting up a cluster by using the template file
        Setting up the cluster manually
          Creating a cluster
          Setting up a network
            Setting up a network when an IP address range is enabled
            Setting up a network when an IP address range is disabled
          Setting up a support page
          Reviewing storage recommendations
          Creating an SVM
      Accessing a cluster by using the ONTAP System Manager browser-based graphic interface
      Configuring System Manager options
      Viewing ONTAP System Manager log files
        How system logging works
      Configuring a cluster by using System Manager
        Accessing a cluster by using the ONTAP System Manager browser-based graphic interface
        Setting up the cluster
          Updating the cluster name
          Changing the cluster password
          Editing DNS configurations
          Creating a cluster management logical interface
          Editing the node name
          Creating a node management logical interface
          Editing AutoSupport settings
          Adding licenses
          Setting the time zone for a cluster
          Monitoring HA pairs
        Setting up the network
          Creating IPspaces
          Creating broadcast domains
          Creating subnets
        Setting up physical storage
          Assigning disks to nodes
          Zeroing spare disks
          Provisioning storage through aggregates
            Provisioning storage by creating an aggregate based on storage recommendations
            Provisioning storage by creating an aggregate manually
            Provisioning storage by creating a Flash Pool aggregate manually
            Provisioning storage by creating a SnapLock aggregate manually
            Provisioning storage by creating a FabricPool-enabled aggregate manually
        Setting up logical storage
          Creating SVMs
            Configuring CIFS and NFS protocols on SVMs
            Configuring iSCSI protocol on SVMs
            Configuring FC protocol and FCoE protocol on SVMs
            Configuring NVMe protocol on SVMs
            Delegating administration to SVM administrators
          Creating FlexVol volumes
          Creating SnapLock volumes
    Setting up SAML authentication
      Enabling SAML authentication
      Disabling SAML authentication
    Setting up peering
      Prerequisites for cluster peering
      Creating intercluster LIFs
      Creating cluster peer relationships
      Creating SVM peers
      What passphrases are
    Managing clusters
      Understanding quorum and epsilon
      Dashboard window
        Monitoring a cluster using the dashboard
      Applications
        Provisioning a basic template
        Storage service definitions
        Adding Microsoft SQL Server over SAN to System Manager
        Application provisioning settings
        Editing an application
        Deleting an application
        Applications window
      Configuration update
        Configuring the administration details of an SVM
        Configuration Updates window
      Service Processors
        Isolating management network traffic
        Assigning IP addresses to Service Processors
        Editing Service Processor settings
        Understanding the Service Processor
        Service Processors window
      Cluster peers
        Generating a peering passphrase
        Modifying the cluster peer passphrase
        Modifying LIFs that are configured for the remote cluster
        Changing the peering encryption status
        Deleting cluster peer relationships
        Cluster Peers window
      High availability
        High Availability window
      Licenses
        Deleting licenses
        License types and entitlement risk
        Licenses window
      Cluster Expansion
        Adding nodes to a cluster
        Configuring the network details of the nodes
      Updating clusters
        Updating clusters in a non MetroCluster configuration
        Updating clusters in a MetroCluster configuration
        Obtaining ONTAP software images
        Updating single-node clusters
        Updating a cluster nondisruptively
        How to update a cluster nondisruptively
        Cluster Update window
      MetroCluster switchover and switchback
        MetroCluster switchover and switchback workflow
        Preparing for switchover and switchback operations
          Renaming the MetroCluster local site (Site A)
        Performing a negotiated switchover
        Performing a unplanned switchover
        Performing a switchback
        MetroCluster Switchover and Switchback Operations window
      Date and time settings of a cluster
        Date and Time window
      SNMP
        Enabling or disabling SNMP
        Editing SNMP information
        Enabling or disabling SNMP traps
        Testing the trap host configuration
        SNMP window
      LDAP
        Viewing the LDAP client configuration
        Using LDAP services
        LDAP window
      Users
        Adding a cluster user account
        Editing a cluster user account
        Changing passwords for cluster user accounts
        Locking or unlocking cluster user accounts
        User accounts (cluster administrators only)
        Roles
        Users window
      Roles
        Adding roles
        Editing roles
        Roles and permissions
        Roles window
    Managing the network
      IPspaces
        Editing IPspaces
        Deleting IPspaces
      Broadcast domains
        Editing broadcast domain settings
        Deleting broadcast domains
      Subnets
        Editing subnet settings
        Deleting subnets
      Network interfaces
        Creating network interfaces
        Editing network interface settings
        Deleting network interfaces
        Migrating a LIF
      Ethernet ports
        Creating interface groups
        Creating VLAN interfaces
        Editing Ethernet port settings
        Editing interface group settings
        Modifying the MTU size of a VLAN
        Deleting VLANs
        Ports and adapters
      FC/FCoE and NVMe adapters
        Editing the FC/FCoE and NVMe adapter speed settings
      Network window
    Managing physical storage
      Storage tiers
        Editing aggregates
        Deleting aggregates
        Changing the RAID configuration when creating an aggregate
        Provisioning cache by adding SSDs
          Provisioning cache to aggregates by adding SSDs
          Increasing the cache for Flash Pool aggregates by adding SSDs
        Adding capacity disks
        Changing the RAID group when adding capacity disks
        Moving FlexVol volumes
        Mirroring aggregates
        Viewing aggregate information
        Installing a CA certificate if you use StorageGRID
        How moving a FlexVol volume works
        How you can use effective ONTAP disk type for mixing HDDs
        What compatible spare disks are
        How System Manager works with hot spares
        Rules for displaying disk types and disk RPM
        How mirrored aggregates work
        What a FabricPool is
        Storage recommendations for creating aggregates
        Storage Tiers window
      Configuring and managing cloud tiers
        Adding a cloud tier
        Attaching an aggregate to a cloud tier
        Provisioning storage by creating a FabricPool-enabled aggregate manually
        Changing the tiering policy of a volume
        Editing a cloud tier
        Deleting a cloud tier
        What cloud tiers and tiering policies are
        What inactive (cold) data is
        Cloud Tier window
      Aggregates
        Aggregates window
      Storage pools
        Creating a storage pool
        Adding disks to a storage pool
        Deleting storage pools
        How to use SSD storage pools
        Requirements and best practices for using SSD storage pools
        Considerations for when to use SSD storage pools
        Considerations for adding SSDs to an existing storage pool versus creating a new one
        Why you add disks to storage pools
        How storage pool works
        Storage Pools window
      Disks
        Reassigning disks to nodes
        Viewing disk information
        How ONTAP reports disk types
        Minimum number of hot spares required for disks
        Spare requirements for multi-disk carrier disks
        Shelf configuration requirements for multi-disk carrier storage shelves
        How to determine when it is safe to remove a multi-disk carrier
        Considerations for sizing RAID groups
        Disks window
      Array LUNs
        Assigning array LUNs
        Reassigning spare array LUNs to nodes
        Zeroing spare array LUNs
        About disks and array LUNs
        Array LUNs window
      Nodes
        Initializing the ComplianceClock time
        Nodes window
      Hardware Cache
        Enabling or disabling Flash Cache modules
        How Flash Cache modules work
        Hardware Cache window
      Events
        Events window
      System alerts
        Acknowledging system health alerts
        Suppressing system health alerts
        Deleting system health alerts
        Available cluster health monitors
        Ways to respond to system health alerts
        System Alerts window
      AutoSupport notifications
        Setting up AutoSupport notifications
        Enabling or disabling AutoSupport settings
        Adding AutoSupport email recipients
        Testing AutoSupport settings
        Generating AutoSupport data
        Viewing AutoSupport summary
        AutoSupport severity types
        AutoSupport window
      Jobs
        Jobs
        Job window
      Flash Pool statistics
        Flash Pool aggregate Statistics window
    Managing logical storage
      Storage Virtual Machines
        SVM Dashboard window
        Monitoring SVMs
        Editing SVM settings
        Deleting SVMs
        Starting SVMs
        Stopping SVMs
        Managing SVMs
        Tracing file access to diagnose access errors on SVMs
        Types of SVMs
        Why you use SVMs
        How ONTAP name service switch configuration works
        Storage Virtual Machines window
        Trace File Access window
      Volumes
        Editing volume properties
        Editing data protection volumes
        Deleting volumes
        Creating FlexClone volumes
        Creating FlexClone files
        Splitting a FlexClone volume from its parent volume
        Viewing the FlexClone volume hierarchy
        Changing the status of a volume
        Viewing the list of saved Snapshot copies
        Creating Snapshot copies outside a defined schedule
        Setting the Snapshot copy reserve
        Hiding the Snapshot copy directory
        Scheduling automatic creation of Snapshot copies
        Restoring a volume from a Snapshot copy
        Extending the expiry date of Snapshot copies
        Renaming Snapshot copies
        Deleting Snapshot copies
        Resizing volumes
        Enabling storage efficiency on a volume
        Changing the deduplication schedule
        Running deduplication operations
        Moving FlexVol volumes between aggregates or nodes
          Manually triggering the cutover for volume move
        Assigning volumes to Storage QoS
        Creating a mirror relationship from a source SVM
        Creating a vault relationship from a source SVM
        Creating a mirror and vault relationship from a source SVM
        Creating an NFS datastore for VMware
        Changing the tiering policy of a volume
        Creating FlexGroup volumes
        Viewing FlexGroup volume information
        Editing FlexGroup volumes
        Specifying advanced options for a FlexGroup volume
        Resizing FlexGroup volumes
        Changing the status of a FlexGroup volume
        Deleting FlexGroup volumes
        Creating FlexCache volumes
        Viewing FlexCache volume information
        Editing FlexCache volumes
        Specifying advanced options for a FlexCache volume
        Resizing FlexCache volumes
        Changing the status of a FlexCache volume
        Deleting FlexCache volumes
        What NetApp Volume Encryption is
        Snapshot configuration
        How volume guarantees work for FlexVol volumes
        FlexClone volumes and space guarantees
        Thin provisioning for greater efficiencies using FlexVol volumes
        Using space reservations with FlexVol volumes
        Benefits of storage efficiency
        Data compression and deduplication
        Guidelines for using deduplication
        Options for resizing volumes
        Considerations when moving volumes
        Volumes window
      Junction Path
        Mounting volumes
        Unmounting FlexVol volumes
        Changing export policies
        Junction Path window
      Shares
        Creating a CIFS share
        Stopping share access
        Creating home directory shares
        Editing share settings
        How ONTAP enables dynamic home directories
        Shares window
      LUNs
        Creating FC SAN optimized LUNs
        Application-specific LUN settings
        Creating LUNs
        Deleting LUNs
        Creating initiator groups
        Deleting initiator groups
        Adding initiators
        Deleting initiators from an initiator group
        Creating port sets
        Deleting port sets
        Cloning LUNs
        Editing LUNs
        Bringing LUNs online
        Taking LUNs offline
        Moving LUNs
        Assigning LUNs to storage QoS
        Editing initiator groups
        Editing initiators
        Editing port sets
        Viewing LUN information
        Viewing initiator groups
        Guidelines for working with FlexVol volumes that contain LUNs
        Understanding space reservations for LUNs
        Guidelines for using LUN multiprotocol type
        Understanding LUN clones
        Initiator hosts
        igroup name
        igroup type
        igroup ostype
        LUNs window
      Qtrees
        Creating qtrees
        Deleting qtrees
        Editing qtrees
        Assigning export policies to qtrees
        Viewing qtree information
        Qtree options
        Qtrees window
      Quotas
        Creating quotas
        Deleting quotas
        Editing quota limits
        Activating or deactivating quotas
        Resizing quotas
        Viewing quota information
        Types of quotas
        Quota limits
        Quota management
        Quotas window
      CIFS protocol
        Setting up CIFS
        Editing the general properties for CIFS
        Adding home directory paths
        Deleting home directory paths
        Resetting CIFS domain controllers
        Updating the CIFS group policy configuration
        Enabling or disabling a CIFS group policy configuration
        Reloading CIFS group policy
        Setting up BranchCache
        Modifying the BranchCache settings
        Deleting the BranchCache configuration
        Adding preferred domain controllers
        Editing preferred domain controllers
        Deleting preferred domain controllers
        Viewing CIFS domain information
        CIFS window
      NFS protocol
        Editing NFS settings
        NFS window
      NVMe protocol
        Setting up NVMe
        Creating an NVMe namespace
        Editing an NVMe namespace
        Cloning an NVMe namespace
        Starting and stopping the NVMe service
        What NVMe is
        What an NVMe subsystem is
          Creating NVMe subsystems
          Editing NVMe subsystems details
          Deleting an NVMe subsystem
          NVMe Subsystems window
        NVMe namespaces
        NVMe namespaces window
      iSCSI protocol
        Creating iSCSI aliases
        Enabling or disabling the iSCSI service on storage system interfaces
        Adding the security method for iSCSI initiators
        Editing default security settings
        Editing initiator security
        Changing the default iSCSI initiator authentication method
        Setting the default security for iSCSI initiators
        Starting or stopping the iSCSI service
        Viewing initiator security information
        iSCSI window
      FC/FCoE protocol
        Starting or stopping the FC or FCoE service
        Changing an FC or FCoE node name
        The FCoE protocol
        FC/FCoE window
      Export policies
        Creating an export policy
        Renaming export policies
        Deleting export policies
        Adding rules to an export policy
        Modifying export policy rules
        Deleting export policy rules
        How export policies control client access to volumes or qtrees
        Export Policies window
      Efficiency policies
        Adding efficiency policies
        Editing efficiency policies
        Deleting efficiency policies
        Enabling or disabling efficiency policies
        What an efficiency policy is
        Understanding predefined efficiency policies
        Efficiency Policies window
      Protection policies
        Creating protection policies
        Deleting protection policies
        Editing protection policies
        Protection Policies window
      QoS policy groups
        Creating QoS policy groups
        Deleting QoS policy groups
        Editing QoS policy groups
        Managing workload performance by using Storage QoS
        How Storage QoS works
        How the maximum throughput limit works
        Rules for assigning storage objects to policy groups
        QoS Policy Groups window
      NIS services
        Adding NIS domains
        Editing NIS domains
        NIS window
      LDAP client services
        Adding an LDAP client configuration
        Deleting an LDAP client configuration
        Editing an LDAP client configuration
        LDAP Client window
      LDAP configuration services
        Editing active LDAP clients
        Deleting active LDAP clients
        LDAP Configuration window
      Kerberos realm services
        Creating a Kerberos realm configuration
        Editing a Kerberos realm configuration
        Deleting Kerberos realm configurations
        Using Kerberos with NFS for strong security
        Kerberos authentication for CIFS
        Kerberos Realm window
      Kerberos interface services
        Editing Kerberos configuration
        Kerberos Interface window
      DNS/DDNS Services
        Enabling or disabling DDNS
        Editing DNS and DDNS settings
        DNS/DDNS Services window
      Users
        Adding SVM user accounts
        Changing the password for SVM user accounts
        Editing SVM user accounts
        Locking or unlocking SVM user accounts
        Users window
      Roles
        Adding roles
        Editing roles
        Roles window
      UNIX
        UNIX window
      Windows
        Creating a local Windows group
        Editing local Windows group properties
        Adding user accounts to a Windows local group
        Renaming a local Windows group
        Deleting a local Windows group
        Creating a local Windows user account
        Editing the local Windows user properties
        Assigning group memberships to a user account
        Renaming a local Windows user
        Resetting the password of a Windows local user
        Deleting a local Windows user account
        Windows window
      Name mapping
        Name mapping conversion rules
        Name Mapping window
    Managing data protection
      Mirror relationships
        Creating a mirror relationship from a destination SVM
        Deleting mirror relationships
        Editing mirror relationships
        Initializing mirror relationships
        Updating mirror relationships
        Quiescing mirror relationships
        Resuming mirror relationships
        Breaking SnapMirror relationships
        Resynchronizing mirror relationships
        Reverse resynchronizing mirror relationships
        Aborting a mirror transfer
        Restoring a volume in a mirror relationship
        How SnapMirror relationships work
      Vault relationships
        Creating a vault relationship from a destination SVM
        Deleting vault relationships
        Editing vault relationships
        Initializing a vault relationship
        Updating a vault relationship
        Quiescing a vault relationship
        Resuming a vault relationship
        Aborting a Snapshot copy transfer
        Restoring a volume in a vault relationship
        What a SnapVault backup is
      Mirror and vault relationships
        Creating a mirror and vault relationship from a destination SVM
        Deleting mirror and vault relationships
        Editing mirror and vault relationships
        Initializing mirror and vault relationships
        Updating mirror and vault relationships
        Quiescing mirror and vault relationships
        Resuming mirror and vault relationships
        Breaking mirror and vault relationships
        Resynchronizing mirror and vault relationships
        Reverse resynchronizing mirror and vault relationships
        Aborting mirror and vault relationships
        Restoring a volume in a mirror and vault relationship
      What lag time is
      Types of data protection relationships
      Understanding workloads supported by StrictSync and Sync policies
      SnapMirror licensing
      Protection window
      SVM Relationships
        Creating SVM relationships
        Editing SVM relationships
        Managing SVM relationships
        SVM Relationships Window
      Protection policies
        Creating protection policies
        Protection Policies window
      Snapshot policies
        Creating Snapshot policies
        Editing Snapshot policies
        Deleting Snapshot policies
        About Snapshot policies
        Snapshot Policies window
      Schedules
        Creating schedules
        Editing schedules
        Deleting schedules
        Schedules
        Schedules window
  Cluster management using System Manager 9.5
    Understanding System Manager
    Icons used in the application interface
    System Manager window layouts
    Window layout customization
    System Manager enhancements
    Setting up your cluster environment
      Setting up the cluster by using OnCommand System Manager
        Setting up a cluster by using the template file
        Setting up the cluster manually
          Creating a cluster
          Setting up a network
            Setting up a network when an IP address range is enabled
            Setting up a network when an IP address range is disabled
          Setting up a support page
          Reviewing storage recommendations
          Creating an SVM
      Accessing a cluster by using the OnCommand System Manager browser-based graphic interface
      Configuring System Manager options
      Viewing OnCommand System Manager log files
        How system logging works
      Configuring a cluster by using System Manager
        Accessing a cluster by using the OnCommand System Manager browser-based graphic interface
        Setting up the cluster
          Updating the cluster name
          Changing the cluster password
          Editing DNS configurations
          Creating a cluster management logical interface
          Editing the node name
          Creating a node management logical interface
          Editing AutoSupport settings
          Adding licenses
          Setting the time zone for a cluster
          Monitoring HA pairs
        Setting up the network
          Creating IPspaces
          Creating broadcast domains
          Creating subnets
        Setting up physical storage
          Assigning disks to nodes
          Zeroing spare disks
          Provisioning storage through aggregates
            Provisioning storage by creating an aggregate based on storage recommendations
            Provisioning storage by creating an aggregate manually
            Provisioning storage by creating a Flash Pool aggregate manually
            Provisioning storage by creating a SnapLock aggregate manually
            Provisioning storage by creating a FabricPool-enabled aggregate manually
        Setting up logical storage
          Creating SVMs
            Configuring CIFS and NFS protocols on SVMs
            Configuring iSCSI protocol on SVMs
            Configuring FC protocol and FCoE protocol on SVMs
            Configuring NVMe protocol on SVMs
            Delegating administration to SVM administrators
          Creating FlexVol volumes
          Creating SnapLock volumes
    Setting up SAML authentication
      Enabling SAML authentication
      Disabling SAML authentication
    Setting up peering
      Prerequisites for cluster peering
      Creating intercluster LIFs
      Creating cluster peer relationships
      Creating SVM peers
      What passphrases are
    Managing clusters
      Understanding quorum and epsilon
      Dashboard window
        Monitoring a cluster using the dashboard
      Applications
        Provisioning a basic template
        Adding Microsoft SQL Server over SAN to System Manager
        Application provisioning settings
        Editing an application
        Deleting an application
      Configuration update
        Configuring the administration details of an SVM
        Configuration Updates window
      Service Processors
        Assigning IP addresses to Service Processors
        Editing Service Processor settings
        Understanding the Service Processor
        Service Processors window
      Cluster peers
        Modifying the cluster peer passphrase
        Modifying the peer network parameters
        Deleting cluster peer relationships
        Peers window
      High availability
        High Availability window
      Licenses
        Deleting licenses
        License types and entitlement risk
        Licenses window
      Cluster Expansion
        Adding nodes to a cluster
        Configuring the network details of the nodes
      Updating clusters
        Updating clusters in a non MetroCluster configuration
        Updating clusters in a MetroCluster configuration
        Obtaining ONTAP software images
        Updating single-node clusters
        Updating a cluster nondisruptively
        How to update a cluster nondisruptively
        Cluster Update window
      Date and time settings of a cluster
        Date and Time window
      SNMP
        Enabling or disabling SNMP
        Editing SNMP information
        Enabling or disabling SNMP traps
        Testing the trap host configuration
        SNMP window
      LDAP
        Viewing the LDAP client configuration
        Using LDAP services
        LDAP window
      Users
        Adding a cluster user account
        Editing a cluster user account
        Changing passwords for cluster user accounts
        Locking or unlocking cluster user accounts
        User accounts (cluster administrators only)
        Roles
        Users window
      Roles
        Adding roles
        Editing roles
        Roles and permissions
        Roles window
    Managing the network
      IPspaces
        Editing IPspaces
        Deleting IPspaces
      Broadcast domains
        Editing broadcast domain settings
        Deleting broadcast domains
      Subnets
        Editing subnet settings
        Deleting subnets
      Network interfaces
        Creating network interfaces
        Editing network interface settings
        Deleting network interfaces
        Migrating a LIF
      Ethernet ports
        Creating interface groups
        Creating VLAN interfaces
        Editing Ethernet port settings
        Editing interface group settings
        Modifying the MTU size of a VLAN
        Deleting VLANs
        Ports and adapters
      FC/FCoE and NVMe adapters
        Editing the FC/FCoE and NVMe adapter speed settings
      Network window
    Managing physical storage
      Storage tiers
        Editing aggregates
        Deleting aggregates
        Changing the RAID configuration when creating an aggregate
        Provisioning cache by adding SSDs
          Provisioning cache to aggregates by adding SSDs
          Increasing the cache for Flash Pool aggregates by adding SSDs
        Adding capacity disks
        Changing the RAID group when adding capacity disks
        Moving FlexVol volumes
        Mirroring aggregates
        Viewing aggregate information
        Installing a CA certificate if you use StorageGRID
        How moving a FlexVol volume works
        How you can use effective ONTAP disk type for mixing HDDs
        What compatible spare disks are
        How System Manager works with hot spares
        Rules for displaying disk types and disk RPM
        How mirrored aggregates work
        What a FabricPool is
        Storage recommendations for creating aggregates
        Storage Tiers window
      Configuring and managing cloud tiers
        Adding a cloud tier
        Attaching an aggregate to a cloud tier
        Provisioning storage by creating a FabricPool-enabled aggregate manually
        Changing the tiering policy of a volume
        Editing a cloud tier
        Deleting a cloud tier
        What cloud tiers and tiering policies are
        What inactive (cold) data is
        Cloud Tier window
      Aggregates
        Aggregates window
      Storage pools
        Creating a storage pool
        Adding disks to a storage pool
        Deleting storage pools
        How to use SSD storage pools
        Requirements and best practices for using SSD storage pools
        Considerations for when to use SSD storage pools
        Considerations for adding SSDs to an existing storage pool versus creating a new one
        Why you add disks to storage pools
        How storage pool works
        Storage Pools window
      Disks
        Reassigning disks to nodes
        Viewing disk information
        How ONTAP reports disk types
        Minimum number of hot spares required for disks
        Spare requirements for multi-disk carrier disks
        Shelf configuration requirements for multi-disk carrier storage shelves
        How to determine when it is safe to remove a multi-disk carrier
        Considerations for sizing RAID groups
        Disks window
      Array LUNs
        Assigning array LUNs
        Reassigning spare array LUNs to nodes
        Zeroing spare array LUNs
        About disks and array LUNs
        Array LUNs window
      Nodes
        Initializing the ComplianceClock time
        Nodes window
      Hardware Cache
        Enabling or disabling Flash Cache modules
        How Flash Cache modules work
        Hardware Cache window
      Events
        Events window
      System alerts
        Acknowledging system health alerts
        Suppressing system health alerts
        Deleting system health alerts
        Available cluster health monitors
        Ways to respond to system health alerts
        System Alerts window
      AutoSupport notifications
        Setting up AutoSupport notifications
        Enabling or disabling AutoSupport settings
        Adding AutoSupport email recipients
        Testing AutoSupport settings
        Generating AutoSupport data
        Viewing AutoSupport summary
        AutoSupport severity types
        AutoSupport window
      Jobs
        Jobs
        Job window
      Flash Pool statistics
        Flash Pool aggregate Statistics window
    Managing logical storage
      Storage Virtual Machines
        SVM Dashboard window
        Monitoring SVMs
        Editing SVM settings
        Deleting SVMs
        Starting SVMs
        Stopping SVMs
        Managing SVMs
        Types of SVMs
        Why you use SVMs
        How ONTAP name service switch configuration works
        Storage Virtual Machines window
      Volumes
        Editing volume properties
        Editing data protection volumes
        Deleting volumes
        Creating FlexClone volumes
        Creating FlexClone files
        Splitting a FlexClone volume from its parent volume
        Viewing the FlexClone volume hierarchy
        Changing the status of a volume
        Viewing the list of saved Snapshot copies
        Creating Snapshot copies outside a defined schedule
        Setting the Snapshot copy reserve
        Hiding the Snapshot copy directory
        Scheduling automatic creation of Snapshot copies
        Restoring a volume from a Snapshot copy
        Extending the expiry date of Snapshot copies
        Renaming Snapshot copies
        Deleting Snapshot copies
        Resizing volumes
        Enabling storage efficiency on a volume
        Changing the deduplication schedule
        Running deduplication operations
        Moving FlexVol volumes between aggregates or nodes
          Manually triggering the cutover for volume move
        Assigning volumes to Storage QoS
        Creating a mirror relationship from a source SVM
        Creating a vault relationship from a source SVM
        Creating a mirror and vault relationship from a source SVM
        Creating an NFS datastore for VMware
        Changing the tiering policy of a volume
        Creating FlexGroup volumes
          Specifying advanced options for a FlexGroup volume
        Editing FlexGroup volumes
        Resizing FlexGroup volumes
        Changing the status of a FlexGroup volume
        Deleting FlexGroup volumes
        Viewing FlexGroup volume information
        What NetApp Volume Encryption is
        Snapshot configuration
        How volume guarantees work for FlexVol volumes
        FlexClone volumes and space guarantees
        Thin provisioning for greater efficiencies using FlexVol volumes
        Using space reservations with FlexVol volumes
        Benefits of storage efficiency
        Data compression and deduplication
        Guidelines for using deduplication
        Options for resizing volumes
        Considerations when moving volumes
        Volumes window
      Junction Path
        Mounting volumes
        Unmounting FlexVol volumes
        Changing export policies
        Junction Path window
      Shares
        Creating a CIFS share
        Stopping share access
        Creating home directory shares
        Editing share settings
        How ONTAP enables dynamic home directories
        Shares window
      LUNs
        Creating FC SAN optimized LUNs
        Application-specific LUN settings
        Creating LUNs
        Deleting LUNs
        Creating initiator groups
        Deleting initiator groups
        Adding initiators
        Deleting initiators from an initiator group
        Creating port sets
        Deleting port sets
        Cloning LUNs
        Editing LUNs
        Bringing LUNs online
        Taking LUNs offline
        Moving LUNs
        Assigning LUNs to storage QoS
        Editing initiator groups
        Editing initiators
        Editing port sets
        Viewing LUN information
        Viewing initiator groups
        Guidelines for working with FlexVol volumes that contain LUNs
        Understanding space reservations for LUNs
        Guidelines for using LUN multiprotocol type
        Understanding LUN clones
        Initiator hosts
        igroup name
        igroup type
        igroup ostype
        LUNs window
      Qtrees
        Creating qtrees
        Deleting qtrees
        Editing qtrees
        Assigning export policies to qtrees
        Viewing qtree information
        Qtree options
        Qtrees window
      Quotas
        Creating quotas
        Deleting quotas
        Editing quota limits
        Activating or deactivating quotas
        Resizing quotas
        Viewing quota information
        Types of quotas
        Quota limits
        Quota management
        Quotas window
      CIFS protocol
        Setting up CIFS
        Editing the general properties for CIFS
        Adding home directory paths
        Deleting home directory paths
        Resetting CIFS domain controllers
        Updating the CIFS group policy configuration
        Enabling or disabling a CIFS group policy configuration
        Reloading CIFS group policy
        Setting up BranchCache
        Modifying the BranchCache settings
        Deleting the BranchCache configuration
        Adding preferred domain controllers
        Editing preferred domain controllers
        Deleting preferred domain controllers
        Viewing CIFS domain information
        CIFS window
      NFS protocol
        Editing NFS settings
        NFS window
      NVMe protocol
        Setting up NVMe
        Creating an NVMe namespace
        Editing an NVMe namespace
        Cloning an NVMe namespace
        Starting and stopping the NVMe service
        What NVMe is
        What an NVMe subsystem is
          Creating NVMe subsystems
          Editing NVMe subsystems details
          Deleting an NVMe subsystem
          NVMe Subsystems window
        NVMe namespaces
        NVMe namespaces window
      iSCSI protocol
        Creating iSCSI aliases
        Enabling or disabling the iSCSI service on storage system interfaces
        Adding the security method for iSCSI initiators
        Editing default security settings
        Editing initiator security
        Changing the default iSCSI initiator authentication method
        Setting the default security for iSCSI initiators
        Starting or stopping the iSCSI service
        Viewing initiator security information
        iSCSI window
      FC/FCoE protocol
        Starting or stopping the FC or FCoE service
        Changing an FC or FCoE node name
        The FCoE protocol
        FC/FCoE window
      Export policies
        Creating an export policy
        Renaming export policies
        Deleting export policies
        Adding rules to an export policy
        Modifying export policy rules
        Deleting export policy rules
        How export policies control client access to volumes or qtrees
        Export Policies window
      Efficiency policies
        Adding efficiency policies
        Editing efficiency policies
        Deleting efficiency policies
        Enabling or disabling efficiency policies
        What an efficiency policy is
        Understanding predefined efficiency policies
        Efficiency Policies window
      Protection policies
        Creating protection policies
        Deleting protection policies
        Editing protection policies
        Protection Policies window
      QoS policy groups
        Creating QoS policy groups
        Deleting QoS policy groups
        Editing QoS policy groups
        Managing workload performance by using Storage QoS
        How Storage QoS works
        How the maximum throughput limit works
        Rules for assigning storage objects to policy groups
        QoS Policy Groups window
      NIS services
        Adding NIS domains
        Editing NIS domains
        NIS window
      LDAP client services
        Adding an LDAP client configuration
        Deleting an LDAP client configuration
        Editing an LDAP client configuration
        LDAP Client window
      LDAP configuration services
        Editing active LDAP clients
        Deleting active LDAP clients
        LDAP Configuration window
      Kerberos realm services
        Creating a Kerberos realm configuration
        Editing a Kerberos realm configuration
        Deleting Kerberos realm configurations
        Using Kerberos with NFS for strong security
        Kerberos authentication for CIFS
        Kerberos Realm window
      Kerberos interface services
        Editing Kerberos configuration
        Kerberos Interface window
      DNS/DDNS Services
        Enabling or disabling DDNS
        Editing DNS and DDNS settings
        DNS/DDNS Services window
      Users
        Adding SVM user accounts
        Changing the password for SVM user accounts
        Editing SVM user accounts
        Locking or unlocking SVM user accounts
        Users window
      Roles
        Adding roles
        Editing roles
        Roles window
      UNIX
        UNIX window
      Windows
        Creating a local Windows group
        Editing local Windows group properties
        Adding user accounts to a Windows local group
        Renaming a local Windows group
        Deleting a local Windows group
        Creating a local Windows user account
        Editing the local Windows user properties
        Assigning group memberships to a user account
        Renaming a local Windows user
        Resetting the password of a Windows local user
        Deleting a local Windows user account
        Windows window
      Name mapping
        Name mapping conversion rules
        Name Mapping window
    Managing data protection
      Mirror relationships
        Creating a mirror relationship from a destination SVM
        Deleting mirror relationships
        Editing mirror relationships
        Initializing mirror relationships
        Updating mirror relationships
        Quiescing mirror relationships
        Resuming mirror relationships
        Breaking SnapMirror relationships
        Resynchronizing mirror relationships
        Reverse resynchronizing mirror relationships
        Aborting a mirror transfer
        Restoring a volume in a mirror relationship
        How SnapMirror relationships work
      Vault relationships
        Creating a vault relationship from a destination SVM
        Deleting vault relationships
        Editing vault relationships
        Initializing a vault relationship
        Updating a vault relationship
        Quiescing a vault relationship
        Resuming a vault relationship
        Aborting a Snapshot copy transfer
        Restoring a volume in a vault relationship
        What a SnapVault backup is
      Mirror and vault relationships
        Creating a mirror and vault relationship from a destination SVM
        Deleting mirror and vault relationships
        Editing mirror and vault relationships
        Initializing mirror and vault relationships
        Updating mirror and vault relationships
        Quiescing mirror and vault relationships
        Resuming mirror and vault relationships
        Breaking mirror and vault relationships
        Resynchronizing mirror and vault relationships
        Reverse resynchronizing mirror and vault relationships
        Aborting mirror and vault relationships
        Restoring a volume in a mirror and vault relationship
      What lag time is
      Types of data protection relationships
      Understanding workloads supported by StrictSync and Sync policies
      SnapMirror licensing
      Protection window
      SVM Relationships
        Creating SVM relationships
        Editing SVM relationships
        Managing SVM relationships
        SVM Relationships Window
      Protection policies
        Creating protection policies
        Protection Policies window
      Snapshot policies
        Creating Snapshot policies
        Editing Snapshot policies
        Deleting Snapshot policies
        About Snapshot policies
        Snapshot Policies window
      Schedules
        Creating schedules
        Editing schedules
        Deleting schedules
        Schedules
        Schedules window
  Cluster management using System Manager 9.3 and 9.4
    Understanding System Manager
    Icons used in the application interface
    System Manager window layouts
    Window layout customization
    System Manager enhancements
    Setting up your cluster environment
      Setting up the cluster by using OnCommand System Manager
        Setting up a cluster by using the template file
        Setting up the cluster manually
          Creating a cluster
          Setting up a network
            Setting up a network when an IP address range is enabled
            Setting up a network when an IP address range is disabled
          Setting up a support page
          Reviewing storage recommendations
          Creating an SVM
      Accessing a cluster by using the OnCommand System Manager browser-based graphic interface
      Configuring System Manager options
      Viewing OnCommand System Manager log files
        How system logging works
      Configuring a cluster by using System Manager
        Accessing a cluster by using the OnCommand System Manager browser-based graphic interface
        Setting up the cluster
          Updating the cluster name
          Changing the cluster password
          Editing DNS configurations
          Creating a cluster management interface
          Editing the node name
          Creating a node management LIF
          Editing AutoSupport settings
          Adding licenses
          Setting the time zone for a cluster
          Monitoring HA pairs
        Setting up the network
          Creating IPspaces
          Creating broadcast domains
          Creating subnets
        Setting up physical storage
          Assigning disks to nodes
          Zeroing spare disks
          Provisioning storage through aggregates
            Provisioning storage by creating an aggregate based on storage recommendations
            Provisioning storage by creating an aggregate manually
            Provisioning storage by creating a Flash Pool aggregate manually
            Provisioning storage by creating a SnapLock aggregate manually
            Provisioning storage by creating a FabricPool-enabled aggregate manually
        Setting up logical storage
          Creating SVMs
            Configuring CIFS and NFS protocols on SVMs
            Configuring iSCSI protocol on SVMs
            Configuring FC protocol and FCoE protocol on SVMs
            Configuring NVMe protocol on SVMs
            Delegating administration to SVM administrators
          Creating FlexVol volumes
          Creating SnapLock volumes
    Setting up SAML authentication
      Enabling SAML authentication
      Disabling SAML authentication
    Setting up peering
      Prerequisites for cluster peering
      Creating intercluster LIFs
      Creating cluster peer relationships
      Creating SVM peers
      What passphrases are
    Managing clusters
      Understanding quorum and epsilon
      Dashboard window
        Monitoring a cluster using the dashboard
      Applications
        Provisioning a basic template
        Adding applications to System Manager
        Application provisioning settings
      Configuration update
        Configuring the administration details of an SVM
        Configuration Updates window
      Service Processors
        Assigning IP addresses to Service Processors
        Editing Service Processor settings
        Understanding the Service Processor
        Service Processors window
      Cluster peers
        Modifying the cluster peer passphrase
        Modifying the peer network parameters
        Deleting cluster peer relationships
        Peers window
      High availability
        High Availability window
      Licenses
        Deleting licenses
        License types and entitlement risk
        Licenses window
      Cluster Expansion
        Adding nodes to a cluster
        Configuring the network details of the nodes
      Updating clusters
        Obtaining ONTAP software images
        Updating single-node clusters disruptively
        Updating a cluster nondisruptively
        How to update a cluster nondisruptively
        Cluster Update window
      Date and time settings of a cluster
        Date and Time window
      SNMP
        Enabling or disabling SNMP
        Setting SNMP information
        Enabling or disabling SNMP traps
        Testing the trap host configuration
        SNMP window
      LDAP
        Viewing the LDAP client configuration
        Using LDAP services
        LDAP window
      Users
        Adding a cluster user account
        Editing a cluster user account
        Changing passwords for cluster user accounts
        Locking or unlocking cluster user accounts
        User accounts (cluster administrators only)
        Roles
        Users window
      Roles
        Adding roles
        Editing roles
        Roles and permissions
        Roles window
    Managing the network
      IPspaces
        Editing IPspaces
        Deleting IPspaces
      Broadcast domains
        Editing broadcast domain settings
        Deleting broadcast domains
      Subnets
        Editing subnet settings
        Deleting subnets
      Network interfaces
        Creating network interfaces
        Editing network interface settings
        Deleting network interfaces
        Migrating a LIF
      Ethernet ports
        Creating interface groups
        Creating VLAN interfaces
        Editing Ethernet port settings
        Editing interface group settings
        Modifying the MTU size of a VLAN
        Deleting VLANs
        Ports and adapters
      FC/FCoE and NVMe adapters
        Editing the FC/FCoE and NVMe adapter speed settings
      Network window
    Managing physical storage
      Storage tiers
        Editing aggregates
        Deleting aggregates
        Changing the RAID configuration when creating an aggregate
        Provisioning cache by adding SSDs
          Provisioning cache to aggregates by adding SSDs
          Increasing the cache for Flash Pool aggregates by adding SSDs
        Adding capacity disks
        Changing the RAID group when adding capacity disks
        Moving FlexVol volumes
        Mirroring aggregates
        Viewing aggregate information
        Installing a CA certificate if you use StorageGRID Webscale
        How moving a FlexVol volume works
        How you can use effective ONTAP disk type for mixing HDDs
        What compatible spare disks are
        How System Manager works with hot spares
        Rules for displaying disk types and disk RPM
        How mirrored aggregates work
        What a FabricPool is
        Storage recommendations for creating aggregates
        Storage Tiers window
      Configuring and managing external capacity tiers
        Adding an external capacity tier
        Attaching an aggregate to an external capacity tier
        Provisioning storage by creating a FabricPool-enabled aggregate manually
        Changing the tiering policy of a volume
        Editing an external capacity tier
        Deleting an external capacity tier
        What external capacity tiers and tiering policies are
        What inactive (cold) data is
        External Capacity Tier window
      Aggregates
        Aggregates window
      Storage pools
        Creating a storage pool
        Adding disks to a storage pool
        Deleting storage pools
        How to use SSD storage pools
        Requirements and best practices for using SSD storage pools
        Considerations for when to use SSD storage pools
        Considerations for adding SSDs to an existing storage pool versus creating a new one
        Why you add disks to storage pools
        How storage pool works
        Storage Pools window
      Disks
        Reassigning disks to nodes
        Viewing disk information
        How ONTAP reports disk types
        Minimum number of hot spares required for disks
        Spare requirements for multi-disk carrier disks
        Shelf configuration requirements for multi-disk carrier storage shelves
        How to determine when it is safe to remove a multi-disk carrier
        Considerations for sizing RAID groups
        Disks window
      Array LUNs
        Assigning array LUNs
        Reassigning spare array LUNs to nodes
        Zeroing spare array LUNs
        About disks and array LUNs
        Array LUNs window
      Nodes
        Initializing the ComplianceClock time
        Nodes window
      Flash Cache
        Enabling or disabling Flash Cache
        How Flash Cache works
        Flash Cache window
      Events
        Events window
      System alerts
        Acknowledging system health alerts
        Suppressing system health alerts
        Deleting system health alerts
        Available cluster health monitors
        Ways to respond to system health alerts
        System Alerts window
      AutoSupport notifications
        Setting up AutoSupport notifications
        Enabling or disabling AutoSupport settings
        Adding AutoSupport email recipients
        Testing AutoSupport settings
        Generating AutoSupport data
        Viewing AutoSupport summary
        AutoSupport severity types
        AutoSupport window
      Jobs
        Jobs
        Job window
      Flash Pool statistics
        Flash Pool aggregate Statistics window
    Managing logical storage
      Storage Virtual Machines
        SVM Dashboard window
        Monitoring SVMs
        Editing SVM settings
        Deleting SVMs
        Starting SVMs
        Stopping SVMs
        Managing SVMs
        Types of SVMs
        Why you use SVMs
        How ONTAP name service switch configuration works
        Storage Virtual Machines window
      Volumes
        Editing volume properties
        Editing data protection volumes
        Deleting volumes
        Creating FlexClone volumes
        Creating FlexClone files
        Splitting a FlexClone volume from its parent volume
        Viewing the FlexClone volume hierarchy
        Changing the status of a volume
        Viewing the list of saved Snapshot copies
        Creating Snapshot copies outside a defined schedule
        Setting the Snapshot copy reserve
        Hiding the Snapshot copy directory
        Scheduling automatic creation of Snapshot copies
        Restoring a volume from a Snapshot copy
        Extending the expiry date of Snapshot copies
        Renaming Snapshot copies
        Deleting Snapshot copies
        Resizing volumes
        Enabling storage efficiency on a volume
        Changing the deduplication schedule
        Running deduplication operations
        Moving FlexVol volumes between aggregates or nodes
          Manually triggering the cutover for volume move
        Assigning volumes to Storage QoS
        Creating a mirror relationship from a source SVM
        Creating a vault relationship from a source SVM
        Creating a mirror and vault relationship from a source SVM
        Creating an NFS datastore for VMware
        Changing the tiering policy of a volume
        Creating FlexGroup volumes
        Editing FlexGroup volumes
        Resizing FlexGroup volumes
        Changing the status of a FlexGroup volume
        Deleting FlexGroup volumes
        Viewing FlexGroup volume information
        What NetApp Volume Encryption is
        Snapshot configuration
        How volume guarantees work for FlexVol volumes
        FlexClone volumes and space guarantees
        Thin provisioning for greater efficiencies using FlexVol volumes
        Using space reservations with FlexVol volumes
        Benefits of storage efficiency
        Data compression and deduplication
        Guidelines for using deduplication
        Options for resizing volumes
        Considerations when moving volumes
        Volumes window
      Junction Path
        Mounting volumes
        Unmounting FlexVol volumes
        Changing export policies
        Junction Path window
      Shares
        Creating a CIFS share
        Stopping share access
        Creating home directory shares
        Editing share settings
        How ONTAP enables dynamic home directories
        Shares window
      LUNs
        Creating FC SAN optimized LUNs
        Application-specific LUN settings
        Creating LUNs
        Deleting LUNs
        Creating initiator groups
        Deleting initiator groups
        Adding initiators
        Deleting initiators from an initiator group
        Creating port sets
        Deleting port sets
        Cloning LUNs
        Editing LUNs
        Bringing LUNs online
        Taking LUNs offline
        Moving LUNs
        Assigning LUNs to storage QoS
        Editing initiator groups
        Editing initiators
        Editing port sets
        Viewing LUN information
        Viewing initiator groups
        Guidelines for working with FlexVol volumes that contain LUNs
        Understanding space reservations for LUNs
        Guidelines for using LUN multiprotocol type
        Understanding LUN clones
        Initiator hosts
        igroup name
        igroup type
        igroup ostype
        LUNs window
      Qtrees
        Creating qtrees
        Deleting qtrees
        Editing qtrees
        Assigning export policies to qtrees
        Viewing qtree information
        Qtree options
        Qtrees window
      Quotas
        Creating quotas
        Deleting quotas
        Editing quota limits
        Activating or deactivating quotas
        Resizing quotas
        Viewing quota information
        Types of quotas
        Quota limits
        Quota management
        Quotas window
      CIFS protocol
        Setting up CIFS
        Editing the general properties for CIFS
        Adding home directory paths
        Deleting home directory paths
        Resetting CIFS domain controllers
        Updating the CIFS group policy configuration
        Enabling or disabling a CIFS group policy configuration
        Reloading CIFS group policy
        Setting up BranchCache
        Modifying the BranchCache settings
        Deleting the BranchCache configuration
        Adding preferred domain controllers
        Editing preferred domain controllers
        Deleting preferred domain controllers
        Viewing CIFS domain information
        CIFS window
      NFS protocol
        Editing NFS settings
        NFS window
      NVMe protocol
        Setting up NVMe
        Creating an NVMe namespace
        Editing an NVMe namespace
        Cloning an NVMe namespace
        Starting and stopping the NVMe service
        What NVMe is
        NVMe namespaces
        NVMe subsystems
        NVMe namespaces window
      iSCSI protocol
        Creating iSCSI aliases
        Enabling or disabling the iSCSI service on storage system interfaces
        Adding the security method for iSCSI initiators
        Editing default security settings
        Editing initiator security
        Changing the default iSCSI initiator authentication method
        Setting the default security for iSCSI initiators
        Starting or stopping the iSCSI service
        Viewing initiator security information
        iSCSI window
      FC/FCoE protocol
        Starting or stopping the FC or FCoE service
        Changing an FC or FCoE node name
        The FCoE protocol
        FC/FCoE window
      Export policies
        Creating an export policy
        Renaming export policies
        Deleting export policies
        Adding rules to an export policy
        Modifying export policy rules
        Deleting export policy rules
        How export policies control client access to volumes or qtrees
        Export Policies window
      Efficiency policies
        Adding efficiency policies
        Editing efficiency policies
        Deleting efficiency policies
        Enabling or disabling efficiency policies
        What an efficiency policy is
        Understanding predefined efficiency policies
        Efficiency Policies window
      Protection policies
        Creating protection policies
        Deleting protection policies
        Editing protection policies
        Protection Policies window
      QoS policy groups
        Creating QoS policy groups
        Deleting QoS policy groups
        Editing QoS policy groups
        Managing workload performance by using Storage QoS
        How Storage QoS works
        How the maximum throughput limit works
        Rules for assigning storage objects to policy groups
        QoS Policy Groups window
      NIS services
        Adding NIS domains
        Editing NIS domains
        NIS window
      LDAP client services
        Adding an LDAP client configuration
        Deleting an LDAP client configuration
        Editing an LDAP client configuration
        LDAP Client window
      LDAP configuration services
        Editing active LDAP clients
        Deleting active LDAP clients
        LDAP Configuration window
      Kerberos realm services
        Creating a Kerberos realm configuration
        Editing a Kerberos realm configuration
        Deleting Kerberos realm configurations
        Using Kerberos with NFS for strong security
        Kerberos authentication for CIFS
        Kerberos Realm window
      Kerberos interface services
        Editing Kerberos configuration
        Kerberos Interface window
      DNS/DDNS Services
        Enabling or disabling DDNS
        Editing DNS and DDNS settings
        DNS/DDNS Services window
      Users
        Adding SVM user accounts
        Changing the password for SVM user accounts
        Editing SVM user accounts
        Locking or unlocking SVM user accounts
        Users window
      Roles
        Adding roles
        Editing roles
        Roles window
      UNIX
        UNIX window
      Windows
        Creating a local Windows group
        Editing local Windows group properties
        Adding user accounts to a Windows local group
        Renaming a local Windows group
        Deleting a local Windows group
        Creating a local Windows user account
        Editing the local Windows user properties
        Assigning group memberships to a user account
        Renaming a local Windows user
        Resetting the password of a Windows local user
        Deleting a local Windows user account
        Windows window
      Name mapping
        Name mapping conversion rules
        Name Mapping window
    Managing data protection
      Mirror relationships
        Creating a mirror relationship from a destination SVM
        Deleting mirror relationships
        Editing mirror relationships
        Initializing mirror relationships
        Updating mirror relationships
        Quiescing mirror relationships
        Resuming mirror relationships
        Breaking SnapMirror relationships
        Resynchronizing mirror relationships
        Reverse resynchronizing mirror relationships
        Aborting a mirror transfer
        Restoring a volume in a mirror relationship
        How SnapMirror relationships work
      Vault relationships
        Creating a vault relationship from a destination SVM
        Deleting vault relationships
        Editing vault relationships
        Initializing a vault relationship
        Updating a vault relationship
        Quiescing a vault relationship
        Resuming a vault relationship
        Aborting a Snapshot copy transfer
        Restoring a volume in a vault relationship
        What a SnapVault backup is
      Mirror and vault relationships
        Creating a mirror and vault relationship from a destination SVM
        Deleting mirror and vault relationships
        Editing mirror and vault relationships
        Initializing mirror and vault relationships
        Updating mirror and vault relationships
        Quiescing mirror and vault relationships
        Resuming mirror and vault relationships
        Breaking mirror and vault relationships
        Resynchronizing mirror and vault relationships
        Reverse resynchronizing mirror and vault relationships
        Aborting mirror and vault relationships
        Restoring a volume in a mirror and vault relationship
      What lag time is
      Types of data protection relationships
      SnapMirror licensing
      Protection window
      Protection policies
        Creating protection policies
        Protection Policies window
      Snapshot policies
        Creating Snapshot policies
        Editing Snapshot policies
        Deleting Snapshot policies
        About Snapshot policies
        Snapshot Policies window
      Schedules
        Creating schedules
        Editing schedules
        Deleting schedules
        Schedules
        Schedules window
  Cluster management using System Manager 9.2 and earlier
    Welcome to OnCommand System Manager Help
      Access to your favorite topics
    Understanding System Manager
    Icons used in the application interface
    Window layout customization
    Supportability Dashboard
    Where to find additional ONTAP information
    Setting up your cluster environment
      Setting up the cluster by using OnCommand System Manager
        Setting up a cluster by using the template file
        Setting up the cluster manually
          Creating a cluster
          Setting up a network
            Setting up a network when an IP address range is enabled
            Setting up a network when an IP address range is disabled
          Setting up a support page
          Reviewing storage recommendations
          Creating an SVM
      Accessing a cluster by using OnCommand System Manager browser-based graphic interface
      Configuring System Manager options
      Viewing OnCommand System Manager log files
        How system logging works
      Configuring a cluster by using System Manager
        Accessing a cluster by using OnCommand System Manager browser-based graphic interface
        Setting up the cluster
          Updating the cluster name
          Changing the cluster password
          Editing DNS configurations
          Creating a cluster-management interface
          Editing the node name
          Creating a node-management interface
          Editing AutoSupport settings
          Adding licenses
          Setting the time for a cluster
          Monitoring HA pairs
        Setting up the network
          Creating IPspaces
          Creating broadcast domains
          Creating subnets
        Setting up physical storage
          Assigning disks to nodes
          Zeroing spare disks
          Provisioning storage through aggregates
            Provisioning storage by creating an aggregate
            Provisioning storage by creating a Flash Pool aggregate
            Provisioning storage by creating a SnapLock aggregate
            Provisioning storage by creating a FabricPool
        Setting up logical storage
          Creating SVMs
            Configuring CIFS and NFS protocols on an SVM
            Configuring iSCSI protocol on SVMs
            Configuring FC and FCoE protocols on SVMs
            Delegating administration to SVM administrators
          Creating FlexVol volumes
          Creating SnapLock volumes
    Managing clusters
      What a cluster is
      Understanding quorum and epsilon
      What a node in the cluster is
      Dashboard window
        Monitoring a cluster using the dashboard
      Applications
      Configuration update
        Configuring the administration details of an SVM
        Configuration Updates window
      Service Processors
        Assigning IP addresses to Service Processors
        Editing Service Processor settings
        Understanding the Service Processor
        Service Processors window
      Cluster peers
        Prerequisites for cluster peering
        Creating cluster peer relationships
        Modifying the cluster peer passphrase
        Modifying the peer network parameters
        Deleting cluster peer relationships
        What a cluster peer is
        What cluster peer intercluster connectivity is
        Connecting one cluster to another cluster in a peer relationship
        Peers window
      High availability
        Understanding HA pairs
        High Availability window
      Licenses
        Deleting licenses
        Managing licenses
        License types and entitlement risk
        Licenses window
      Cluster Expansion
        Adding nodes to a cluster
        Configuring the network details of the nodes
      Cluster update
        Updating the cluster nondisruptively
          Obtaining ONTAP software images
        How you update a cluster nondisruptively
        Cluster Update window
      Date and time
        Managing the cluster time
        Date and Time window
      SNMP
        Enabling or disabling SNMP
        Setting SNMP information
        Enabling or disabling SNMP traps
        Testing the trap host configuration
        Options to use when configuring SNMP
        Managing SNMP on the cluster
        SNMP window
      LDAP
        Viewing the LDAP client configuration
        Using LDAP services
        LDAP window
      Users
        Adding a cluster user account
        Editing a cluster user account
        Changing passwords for cluster user accounts
        Locking or unlocking cluster user accounts
        User accounts (cluster administrators only)
        Roles
        Users window
      Roles
        Adding roles
        Editing roles
        Roles and permissions
        Predefined roles for cluster administrators
        Roles window
    Managing the network
      IPspaces
        Editing IPspaces
        Deleting IPspaces
        Configuring IPspaces
        Standard properties of IPspaces
      Broadcast domains
        Editing broadcast domains
        Deleting broadcast domains
        Configuring broadcast domains
      Subnets
        Editing subnets
        Deleting subnets
      Network interfaces
        Creating network interfaces
        Editing network interfaces
        Deleting network interfaces
        Migrating a LIF
        What LIFs are
        Roles for LIFs
        Guidelines for creating LIFs
      Ethernet ports
        Creating interface groups
        Creating VLAN interfaces
        Editing Ethernet port settings
        Editing interface group settings
        Editing the MTU size of a VLAN
        Deleting VLANs
        Ports and adapters
        Types of network ports
        How VLANs work
      FC/FCoE adapters
        Editing the FC/FCoE adapter speed
        Configuring subnets
      Network window
    Managing physical storage
      Storage Tiers
        Adding an external capacity tier
        Attaching an aggregate to external capacity tier
        Deleting an external capacity tier
        Editing an external capacity tier
        Editing aggregates
        Deleting aggregates
        Changing the RAID configuration when creating an aggregate
        Provisioning cache by adding SSDs
          Provisioning cache to aggregates by adding SSDs
          Increasing the cache for Flash Pool aggregates by adding SSDs
        Adding capacity disks
        Changing the RAID group when adding capacity disks
        Moving FlexVol volumes
        Mirroring aggregates
        Viewing aggregate information
        Understanding aggregates
        Installing a CA certificate if you use StorageGRID Webscale
        How RAID groups are named
        How moving a FlexVol volume works
        How Flash Pool aggregates work
        How you can use effective ONTAP disk type for mixing HDDs
        What compatible spare disks are
        How System Manager works with hot spares
        Rules for displaying disk types and disk RPM
        How mirrored aggregates work
        What external capacity tiers and tiering policies are
        What a FabricPool is
        Storage Tiers window
      Aggregates
        Aggregates window
      Storage pools
        Creating a storage pool
        Adding disks to a storage pool
        Deleting storage pools
        How you use SSD storage pools
        How Flash Pool SSD partitioning increases cache allocation flexibility for Flash Pool aggregates
        Requirements and best practices for using SSD storage pools
        Considerations for when to use SSD storage pools
        Considerations for adding SSDs to an existing storage pool versus creating a new one
        Why you add disks to storage pools
        How storage pool works
        Storage Pools window
      Disks
        Reassigning disks to nodes
        Viewing disk information
        Understanding RAID drive types
        How ONTAP reports disk types
        How hot spare disks work
        RAID protection for array LUNs
        Minimum number of hot spares you should have
        Spare requirements for multi-disk carrier disks
        Shelf configuration requirements for multi-disk carrier storage shelves
        How to determine when it is safe to remove a multi-disk carrier
        Considerations for sizing RAID groups
        Considerations for ONTAP RAID groups for array LUNs
        Disks window
      Array LUNs
        Assigning array LUNs
        Reassigning spare array LUNs to nodes
        Zeroing spare array LUNs
        About disks and array LUNs
        How disks and array LUNs become available for use
        Rules for mixing array LUNs in an aggregate
        Array LUNs window
      Nodes
        Initializing the ComplianceClock time
        Nodes window
      Flash Cache
        Enabling or disabling Flash Cache
        How Flash Cache works
        Flash Cache window
      Events
        Events window
      System alerts
        Monitoring the health of your system
        Acknowledging system health alerts
        Suppressing system health alerts
        Deleting system health alerts
        Available cluster health monitors
        Ways to respond to system health alerts
        System Alerts window
      AutoSupport notifications
        Setting up AutoSupport notifications
        Enabling or disabling AutoSupport settings
        Adding AutoSupport email recipients
        Testing AutoSupport settings
        Generating AutoSupport data
        Viewing AutoSupport summary
        AutoSupport severity types
        AutoSupport window
      Jobs
        Jobs
        Job window
      Flash Pool statistics
        Flash Pool aggregate Statistics window
    Managing logical storage
      Storage Virtual Machines
        SVM Dashboard window
        Monitoring SVMs
        Editing SVM settings
        Deleting SVMs
        Starting SVMs
        Stopping SVMs
        What SVMs are
        Managing SVMs
        Types of SVMs
        Why you use SVMs
        How ONTAP name service switch configuration works
        Storage Virtual Machines window
      Volumes
        Editing the volume properties
        Editing data protection volumes
        Deleting volumes
        Creating FlexClone volumes
        Creating FlexClone files
        Splitting a FlexClone volume from its parent volume
        Viewing the FlexClone volume hierarchy
        Changing the status of a volume
        Viewing the Snapshot copies
        Creating Snapshot copies
        Setting the Snapshot copy reserve
        Hiding the Snapshot copy directory
        Scheduling automatic Snapshot copies
        Restoring a volume from a Snapshot copy
        Extending the expiry date of Snapshot copies
        Renaming Snapshot copies
        Deleting Snapshot copies
        Resizing volumes
        Enabling storage efficiency on a volume
        Changing the deduplication schedule
        Running deduplication operations
        Moving FlexVol volumes between aggregates or nodes
          Manually triggering the cutover for volume move
        Assigning volumes to Storage QoS
        Creating a mirror relationship from a source SVM
        Creating a vault relationship from a source SVM
        Creating a mirror and vault relationship from a source SVM
        Creating an NFS datastore for VMware
        Changing the tiering policy of a volume
        Creating FlexGroup volumes
        Editing FlexGroup volumes
        Resizing FlexGroup volumes
        Changing the status of a FlexGroup volume
        Deleting FlexGroup volumes
        Viewing FlexGroup volume information
        What volume granular encryption is
        How FlexVol volumes work
        Considerations for creating a FlexClone volume from a SnapMirror source or destination volume
        Snapshot configuration
        How volume guarantees work for FlexVol volumes
        FlexClone volumes and space guarantees
        Thin provisioning for greater efficiencies using FlexVol volumes
        Using space reservations with FlexVol volumes
        Benefits of storage efficiency
        Data compression and deduplication
        Guidelines for using deduplication
        Options for resizing volumes
        Considerations when moving volumes
        How moving a FlexVol volume works
        Volumes window
      Namespace
        Mounting volumes
        Unmounting FlexVol volumes
        Changing export policies
        Namespace window
      Shares
        Creating a CIFS share
        Stopping share access
        Creating home directory shares
        Editing share settings
        How ONTAP enables dynamic home directories
        Shares window
      LUNs
        Creating FC SAN optimized LUNs
        Application-specific LUN settings
        Creating LUNs
        Deleting LUNs
        Creating initiator groups
        Deleting initiator groups
        Adding initiators
        Deleting initiators from an initiator group
        Creating port sets
        Deleting port sets
        Cloning LUNs
        Editing LUNs
        Bringing LUNs online
        Taking LUNs offline
        Moving LUNs
        Assigning LUNs to Storage QoS
        Editing initiator groups
        Editing initiators
        Editing port sets
        Viewing LUN information
        Viewing initiator groups
        Guidelines for working with FlexVol volumes that contain LUNs
        LUN size and type
        Understanding space reservations for LUNs
        Guidelines for using LUN multiprotocol type
        Understanding LUN clones
        Resizing a LUN
        Initiator hosts
        VMware RDM
        What igroups are
        Required information for creating igroups
        igroup name
        igroup type
        igroup ostype
        Ways to limit LUN access with port sets and igroups
        LUNs window
      Qtrees
        Creating qtrees
        Deleting qtrees
        Editing qtrees
        Assigning export policies to qtrees
        Viewing qtree information
        What a qtree is
        Qtree options
        Security styles
        Qtrees window
      Quotas
        Creating quotas
        Deleting quotas
        Editing quota limits
        Activating or deactivating quotas
        Resizing quotas
        Viewing quota information
        Types of quotas
        Quota limits
        Quota management
        How qtree changes affect quotas
        How changing the security style of a qtree affects user quotas
        How quotas work with users and groups
        Quotas window
      CIFS protocol
        Setting up CIFS
        Editing the general properties for CIFS
        Adding home directory paths
        Deleting home directory paths
        Resetting CIFS domain controllers
        Updating the CIFS group policy configuration
        Enabling or disabling a CIFS group policy configuration
        Reloading CIFS group policy
        Setting up BranchCache
        Modifying the BranchCache settings
        Deleting the BranchCache configuration
        Adding preferred domain controllers
        Editing preferred domain controllers
        Deleting preferred domain controllers
        Viewing CIFS domain information
        SMB concepts
        How ONTAP enables you to provide SMB client access to UNIX symbolic links
        Using BranchCache to cache SMB share content at a branch office
        What happens when you delete the BranchCache configuration
        CIFS window
      NFS protocol
        Editing NFS settings
        How ONTAP handles NFS client authentication
        NFS window
      iSCSI protocol
        Creating iSCSI aliases
        Enabling or disabling the iSCSI service on storage system interfaces
        Adding the security method for iSCSI initiators
        Editing default security settings
        Editing initiator security
        Changing the default iSCSI initiator authentication method
        Setting the default security for iSCSI initiators
        Starting or stopping the iSCSI service
        Viewing initiator security information
        What iSCSI is
        What iSCSI nodes are
        Initiator security
        What CHAP authentication is
        iSCSI window
      FC/FCoE protocol
        Starting or stopping the FC or FCoE service
        Changing an FC or FCoE node name
        What FC is
        What FC nodes are
        The FCoE protocol
        FC/FCoE window
      Export policies
        Creating an export policy
        Renaming export policies
        Deleting export policies
        Adding rules to an export policy
        Modifying export policy rules
        Deleting export policy rules
        How export policies control client access to volumes or qtrees
        Export Policies window
      Efficiency policies
        Adding efficiency policies
        Editing efficiency policies
        Deleting efficiency policies
        Enabling or disabling efficiency policies
        What an efficiency policy is
        Understanding predefined efficiency policies
        Efficiency Policies window
      Protection policies
        Creating protection policies
        Deleting protection policies
        Editing protection policies
        Configuring SnapMirror policies
        Protection Policies window
      QoS policy groups
        Creating QoS policy groups
        Deleting QoS policy groups
        Editing QoS policy groups
        Managing workload performance by using Storage QoS
        How Storage QoS works
        How the maximum throughput limit works
        Rules for assigning storage objects to policy groups
        QoS Policy Groups window
      NIS services
        Adding NIS domains
        Editing NIS domains
        Managing NIS domains
        NIS window
      LDAP client services
        Adding an LDAP client configuration
        Deleting an LDAP client configuration
        Editing an LDAP client configuration
        LDAP Client window
      LDAP configuration services
        Editing active LDAP clients
        Deleting active LDAP clients
        LDAP Configuration window
      Kerberos realm services
        Creating a Kerberos realm configuration
        Editing a Kerberos realm configuration
        Deleting Kerberos realm configurations
        Using Kerberos with NFS for strong security
        Kerberos authentication for CIFS
        Kerberos Realm window
      Kerberos interface services
        Editing Kerberos configuration
        Kerberos Interface window
      DNS/DDNS Services
        Enabling or disabling DNS and DDNS
        Editing DNS and DDNS settings
        DNS/DDNS Services window
      Users
        Adding SVM user accounts
        Changing the password for SVM user accounts
        Editing SVM user accounts
        Locking or unlocking SVM user accounts
        Users window
      Roles
        Adding roles
        Editing roles
        Predefined roles for SVM administrators
        Roles window
      UNIX
        UNIX window
      Windows
        Creating a local Windows group
        Editing local Windows group properties
        Adding user accounts to a Windows local group
        Renaming a local Windows group
        Deleting a local Windows group
        Creating a local Windows user account
        Editing the local Windows user properties
        Assigning group memberships to a user account
        Renaming a local Windows user
        Resetting the password of a Windows local user
        Deleting a local Windows user account
        Using local users and groups for authentication and authorization
        Local users and groups concepts
        Reasons for creating local users and local groups
        What local privileges are
        List of supported privileges
        Predefined BUILTIN groups and default privileges
        Windows window
      Name mapping
        Configuring name mappings
        How name mapping works
        Name mapping conversion rules
        Name Mapping window
    Managing data protection
      Mirror relationships
        Creating a mirror relationship from a destination SVM
        Deleting mirror relationships
        Editing mirror relationships
        Initializing mirror relationships
        Updating mirror relationships
        Quiescing mirror relationships
        Resuming mirror relationships
        Breaking SnapMirror relationships
        Resynchronizing mirror relationships
        Reverse resynchronizing mirror relationships
        Aborting a mirror transfer
        Restoring a volume in a mirror relationship
        Components of a mirror relationship
        How SnapMirror works
        Uses for data protection mirror copies
      Vault relationships
        Creating a vault relationship from a destination SVM
        Deleting vault relationships
        Editing vault relationships
        Initializing a vault relationship
        Updating a vault relationship
        Quiescing a vault relationship
        Resuming a vault relationship
        Aborting a Snapshot copy transfer
        Restoring a volume in a vault relationship
        What a SnapVault backup is
        How a SnapVault backup works
        Which data gets backed up and restored from a SnapVault backup
        How SnapVault backups work with data compression
        SnapVault backup limitations
        Guidelines for planning Snapshot copy schedule and retention for SnapVault backups
        Data protection for SVM namespace and root information
      Mirror and vault relationships
        Creating a mirror and vault relationship from a destination SVM
        Deleting mirror and vault relationships
        Editing mirror and vault relationships
        Initializing mirror and vault relationships
        Updating mirror and vault relationships
        Quiescing mirror and vault relationships
        Resuming mirror and vault relationships
        Breaking mirror and vault relationships
        Resynchronizing mirror and vault relationships
        Reverse resynchronizing mirror and vault relationships
        Aborting mirror and vault relationships
        Restoring a volume in a mirror and vault relationship
      What lag time is
      Types of data protection relationships
      Protection window
      Snapshot policies
        Creating Snapshot policies
        Editing Snapshot policies
        Deleting Snapshot policies
        About Snapshot policies
        Snapshot Policies window
      Schedules
        Creating schedules
        Editing schedules
        Deleting schedules
        Schedules
        Schedules window
  Cluster management workflows using System Manager 9.5 to 9.7
    ONTAP System Manager workflows
    Setting up a cluster by using ONTAP System Manager
      Setting up a cluster by using the template file
      Setting up the cluster manually
        Creating a cluster
        Setting up a network
          Setting up a network when an IP address range is enabled
          Setting up a network when an IP address range is disabled
        Setting up a support page
        Reviewing storage recommendations
        Creating an SVM
    Setting up the network
      Creating VLAN interfaces
      Creating interface groups
      Creating broadcast domains
      Creating subnets
      Creating network interfaces
    Assigning disks or array LUNs to nodes
      Assigning disks to nodes
      Zeroing spare disks
      Assigning array LUNs
      Zeroing spare array LUNs
    Managing FlexGroup volumes using System Manager
      Creating FlexGroup volumes
    Resizing FlexGroup volumes using System Manager
      Resizing FlexGroup volumes
    Assigning disks to existing aggregates
      Adding capacity disks
      Provisioning cache to aggregates by adding SSDs
      Creating a storage pool
    Provisioning cache through Flash Pool aggregates
      Provisioning cache to aggregates by adding SSDs
      Increasing the cache for Flash Pool aggregates by adding SSDs
      Creating a storage pool
    Providing data resiliency by mirroring aggregates
      Provisioning storage through aggregates
        Provisioning storage by creating an aggregate manually
        Provisioning storage by creating a Flash Pool aggregate manually
      Mirroring aggregates
    Providing data access to qtrees using export policies
      Creating qtrees
      Assigning export policies to qtrees
      Creating an export policy
      Adding rules to an export policy
    Configuring a Service Processor
      Assigning IP addresses to Service Processors
      Editing Service Processor settings
    Setting up a BranchCache configuration
      Setting up CIFS
      Setting up BranchCache
      Editing share settings
    Protecting data using mirror and vault relationship
      Creating a mirror and vault relationship from a source SVM
      Creating a mirror and vault relationship from a destination SVM
    Protecting data using SnapLock
      Adding licenses
      Provisioning storage by creating a SnapLock aggregate manually
      Creating SnapLock volumes
      Mounting volumes
      Creating a mirror or vault relationship from a source or destination SVM
        Creating a mirror relationship from a source SVM
        Creating a mirror relationship from a destination SVM
        Creating a vault relationship from a source SVM
        Creating a vault relationship from a destination SVM
  Cluster management workflows using System Manager 9.3 and 9.4
    OnCommand System Manager workflows
    Setting up a cluster by using OnCommand System Manager
      Setting up a cluster by using the template file
      Setting up the cluster manually
        Creating a cluster
        Setting up a network
          Setting up a network when an IP address range is enabled
          Setting up a network when an IP address range is disabled
        Setting up a support page
        Reviewing storage recommendations
        Creating an SVM
    Setting up the network
      Creating VLAN interfaces
      Creating interface groups
      Creating broadcast domains
      Creating subnets
      Creating network interfaces
    Assigning disks or array LUNs to nodes
      Assigning disks to nodes
      Zeroing spare disks
      Assigning array LUNs
      Zeroing spare array LUNs
    Managing FlexGroup volumes using System Manager
      Creating FlexGroup volumes
    Resizing FlexGroup volumes using System Manager
      Resizing FlexGroup volumes
    Assigning disks to existing aggregates
      Adding capacity disks
      Provisioning cache to aggregates by adding SSDs
      Creating a storage pool
    Provisioning cache through Flash Pool aggregates
      Provisioning cache to aggregates by adding SSDs
      Increasing the cache for Flash Pool aggregates by adding SSDs
      Creating a storage pool
    Providing data resiliency by mirroring aggregates
      Provisioning storage through aggregates
        Provisioning storage by creating an aggregate manually
        Provisioning storage by creating a Flash Pool aggregate manually
      Mirroring aggregates
    Providing data access to qtrees using export policies
      Creating qtrees
      Assigning export policies to qtrees
      Creating an export policy
      Adding rules to an export policy
    Configuring a Service Processor
      Assigning IP addresses to Service Processors
      Editing Service Processor settings
    Setting up a BranchCache configuration
      Setting up CIFS
      Setting up BranchCache
      Editing share settings
    Protecting data using mirror and vault relationship
      Creating a mirror and vault relationship from a source SVM
      Creating a mirror and vault relationship from a destination SVM
    Protecting data using SnapLock
      Adding licenses
      Provisioning storage by creating a SnapLock aggregate manually
      Creating SnapLock volumes
      Mounting volumes
      Creating a mirror or vault relationship from a source or destination SVM
        Creating a mirror relationship from a source SVM
        Creating a mirror relationship from a destination SVM
        Creating a vault relationship from a source SVM
        Creating a vault relationship from a destination SVM
  Cluster management workflows using System Manager 9.2 and earlier
    OnCommand System Manager workflows
    Setting up a cluster by using OnCommand System Manager
      Setting up a cluster by using the template file
      Setting up the cluster manually
        Creating a cluster
        Setting up a network
          Setting up a network when an IP address range is enabled
          Setting up a network when an IP address range is disabled
        Setting up a support page
        Reviewing storage recommendations
        Creating an SVM
    Performing a nondisruptive cluster update
      Obtaining ONTAP software images
      Updating the cluster nondisruptively
    Setting up the network
      Creating VLAN interfaces
      Creating interface groups
      Creating broadcast domains
      Creating subnets
      Creating network interfaces
    Assigning disks or array LUNs to nodes
      Assigning disks to nodes
      Zeroing spare disks
      Assigning array LUNs
      Zeroing spare array LUNs
    Managing storage tiers by using FabricPool
      Adding an external capacity tier
      Attaching an aggregate to external capacity tier
      Provisioning storage by creating a FabricPool
      Changing the tiering policy of a volume
    Managing FlexGroup volumes using System Manager
      Creating FlexGroup volumes
    Resizing FlexGroup volumes using System Manager
      Resizing FlexGroup volumes
    Assigning disks to existing aggregates
      Adding capacity disks
      Provisioning cache to aggregates by adding SSDs
      Creating a storage pool
    Provisioning cache through Flash Pool aggregates
      Provisioning cache to aggregates by adding SSDs
      Increasing the cache for Flash Pool aggregates by adding SSDs
      Creating a storage pool
    Providing data resiliency by mirroring aggregates
      Provisioning storage through aggregates
        Provisioning storage by creating an aggregate
        Provisioning storage by creating a Flash Pool aggregate
      Mirroring aggregates
    Providing data access to qtrees using export policies
      Creating qtrees
      Assigning export policies to qtrees
      Creating an export policy
      Adding rules to an export policy
    Configuring a Service Processor
      Assigning IP addresses to Service Processors
      Editing Service Processor settings
    Setting up a BranchCache configuration
      Setting up CIFS
      Setting up BranchCache
      Editing share settings
    Protecting data using mirror and vault relationship
      Creating a mirror and vault relationship from a source SVM
      Creating a mirror and vault relationship from a destination SVM
    Protecting data using SnapLock
      Adding licenses
      Provisioning storage by creating a SnapLock aggregate
      Creating SnapLock volumes
      Mounting volumes
      Creating a mirror or vault relationship from a source or destination SVM
        Creating a mirror relationship from a source SVM
        Creating a mirror relationship from a destination SVM
        Creating a vault relationship from a source SVM
        Creating a vault relationship from a destination SVM
  Disk and aggregate management
    Deciding whether to use this guide
    Aggregate creation workflow
      Deciding which aggregate creation method to use
      Creating aggregates with auto-provision
      Default RAID policies for aggregates
      How to determine the number of disks or disk partitions required for an aggregate
      Creating aggregates manually
    Aggregate expansion workflow
      Adding drives to a node or shelf
      Manually assigning disk ownership
      Fast zeroing of drives
      Expanding aggregates
    Managing aggregates
      RAID protection levels for disks
      How to determine the number of disks or disk partitions required for an aggregate
      Correcting misaligned spare partitions
      Determining drive and RAID group information for an aggregate
      Relocating aggregate ownership within an HA pair
        Relocating aggregate ownership
        Commands for aggregate relocation
      Assigning aggregates to SVMs
      How to determine space usage in an aggregate
      Determining which volumes reside on an aggregate
      How you can determine and control a volume's space usage in the aggregate
      Methods to create space in an aggregate
      Commands for managing aggregates
    Working with Flash Pool aggregates
      Flash Pool caching policies and SSD partitioning
        How Flash Pool aggregate caching policies work
        How Flash Pool SSD partitioning works for Flash Pool aggregates using storage pools
      Determining Flash Pool candidacy and optimal cache size
      Creating a Flash Pool aggregate using physical SSDs
      Creating a Flash Pool aggregate using SSD storage pools
        Determining whether a Flash Pool aggregate is using an SSD storage pool
        Creating an SSD storage pool
        Creating a Flash Pool aggregate using SSD storage pool allocation units
        Determining the impact to cache size of adding SSDs to an SSD storage pool
        Adding SSDs to an SSD storage pool
        Commands for managing SSD storage pools
      Determining whether to modify the caching policy of Flash Pool aggregates
        Modifying caching policies of Flash Pool aggregates
        Setting the cache-retention policy for Flash Pool aggregates
    Managing disks
      When you need to update the Disk Qualification Package
      How hot spare disks work
      How low spare warnings can help you manage your spare disks
      Displaying disk and partition ownership
      Manually assigning ownership of partitioned disks
        Manually assigning disks with root-data partitioning
        Manually assigning disks with root-data-data partitioning
      Additional root-data partitioning management options
      Configuring automatic assignment of disk ownership
        Which disk autoassignment policy to use
      Removing a failed disk
      Removing ownership from a disk
      Sanitizing a disk
      Sanitizing a disk in maintenance mode
      Setting up an active-passive configuration on nodes using root-data partitioning
      Setting up an active-passive configuration on nodes using root-data-data partitioning
      Commands for managing disks
      Commands for displaying space usage information
      Commands for displaying information about storage shelves
    Managing RAID groups
      Converting from RAID-DP to RAID-TEC
      Converting RAID-TEC to RAID-DP
      Considerations for sizing RAID groups
      Customizing the size of your RAID groups
    Appendix: Mirrored and unmirrored aggregates
      How unmirrored aggregates work
      How mirrored aggregates work
    Where to find additional information
  High-availability configuration
    Deciding whether to use this guide
    Planning your HA pair configuration
      Best practices for HA pairs
      Setup requirements and restrictions for standard HA pairs
      Setup requirements and restrictions for mirrored HA pairs
      Requirements for hardware-assisted takeover
      If your cluster consists of a single HA pair
      Storage configuration variations for HA pairs
      HA pairs and storage system model types
        Single-chassis and dual-chassis HA pairs
        Interconnect cabling for systems with variable HA configurations
        HA configuration and the HA state PROM value
    Requirements for cabling HA pair
      System cabinet or equipment rack installation
        HA pairs in an equipment rack
        HA pairs in a system cabinet
      Required documentation
      Required tools
      Required equipment
      Preparing your equipment
        Installing the nodes in equipment racks
        Installing the nodes in a system cabinet
      Cabling a standard HA pair
        Cabling the HA interconnect (all systems except 32xx or 80xx in separate chassis)
        Cabling the HA interconnect (32xx systems in separate chassis)
        Cabling the HA interconnect (80xx systems in separate chassis)
      Cabling a mirrored HA pair
        Cabling the HA interconnect (all systems except 32xx or 80xx in separate chassis)
        Cabling the HA interconnect (32xx systems in separate chassis)
        Cabling the HA interconnect (80xx systems in separate chassis)
      Required connections for using uninterruptible power supplies with standard or mirrored HA pairs
    Configuring an HA pair
      Verifying and setting the HA state on the controller modules and chassis
      Setting the HA mode and enabling storage failover
        Commands for setting the HA mode
        Commands for enabling and disabling storage failover
      Enabling cluster HA and switchless-cluster in a two-node cluster
      Checking for common configuration errors using Config Advisor
      Configuring hardware-assisted takeover
        Commands for configuring hardware-assisted takeover
        System events that trigger hardware-assisted takeover
      Configuring automatic takeover
        Commands for controlling automatic takeover
        System events that result in an automatic takeover
      Configuring automatic giveback
        Commands for configuring automatic giveback
        How variations of the storage failover modify command affect automatic giveback
      Testing takeover and giveback
    Monitoring an HA pair
      Commands for monitoring an HA pair
      Description of node states displayed by storage failover show-type commands
    Halting or rebooting a node without initiating takeover
      Commands for halting or rebooting a node without initiating takeover
      Halting or rebooting a node without initiating takeover in a two-node cluster
    Performing a manual takeover
      Commands for performing and monitoring manual takeovers
      Moving epsilon for certain manually initiated takeovers
    Performing a manual giveback
      If giveback is interrupted
      If giveback is vetoed
      Commands for performing a manual giveback
    Nondisruptive operations with HA pairs
      Where to find procedures for nondisruptive operations with HA pairs
    Relocating aggregate ownership within an HA pair
      Relocating aggregate ownership
      Commands for aggregate relocation
    Appendix: Understanding takeover and giveback
      When takeovers occur
      How hardware-assisted takeover speeds up takeover
      How automatic takeover and giveback work
      What happens during takeover
      What happens during giveback
      HA policy and how it affects takeover and giveback operations
      Background disk firmware update and takeover, giveback, and aggregate relocation
      Types of disk ownership
  Managing storage tiers
    Deciding whether to use the Managing Storage Tiers By Using FabricPool Guide
    Managing storage tiers by using FabricPool
      Benefits of storage tiers by using FabricPool
      Considerations and requirements for using FabricPool
      Understanding FabricPool tiering policies
      FabricPool management workflow
      Configuring FabricPool
        Preparing for FabricPool configuration
          Installing a FabricPool license
            Installing a FabricPool license (video)
          Installing a CA certificate if you use StorageGRID
          Installing a CA certificate if you use ONTAP S3
        Setting up an object store as the cloud tier for FabricPool
          Setting up StorageGRID as the cloud tier
            Attaching StorageGRID as a FabricPool cloud tier (video)
          Setting up ONTAP S3 as the cloud tier
          Setting up Alibaba Cloud Object Storage as the cloud tier
          Setting up AWS S3 as the cloud tier
            Attaching AWS S3 as a FabricPool cloud tier (video)
          Setting up Google Cloud Storage as the cloud tier
          Setting up IBM Cloud Object Storage as the cloud tier
          Setting up Azure Blob Storage for the cloud as the cloud tier
          Setting up object stores for FabricPool in a MetroCluster configuration
        Attaching the cloud tier to an aggregate
      Managing FabricPool
        Determining how much data in a volume is inactive by using inactive data reporting
        Adding or moving volumes to FabricPool as needed
          Creating a volume for FabricPool
          Moving a volume to FabricPool
        Object tagging using user-created custom tags
          Assigning a new tag during volume creation
          Modifying an existing tag
          Deleting a tag
          Viewing existing tags on a volume
          Checking object tagging status on FabricPool volumes
        Monitoring the space utilization for FabricPool
        Managing storage tiering by modifying a volume's tiering policy or tiering minimum cooling period
          Archiving volumes with FabricPool (video)
        Using cloud migration controls to override a volume's default tiering policy
        Promoting data to the performance tier
          Promoting all data from a FabricPool volume to the performance tier
          Promoting file system data to the performance tier
          Checking the status of a performance tier promotion
          Triggering scheduled migration and tiering
      Managing FabricPool mirrors
        Creating a FabricPool mirror
        Monitoring FabricPool mirror resync status
        Displaying FabricPool mirror details
        Promoting a FabricPool mirror
        Removing a FabricPool mirror
        Replacing an existing object store using a FabricPool mirror
        Replacing a FabricPool mirror on a MetroCluster configuration
      Commands for managing aggregates with FabricPool
  System administration
    Deciding whether to use this guide
    Cluster and SVM administrators
      What the cluster management server is
      Types of SVMs
    ONTAP management interface basics
      Accessing the cluster by using the CLI
        Accessing the cluster by using the serial port
        Accessing the cluster by using SSH
        SSH login security
        Enabling Telnet or RSH access to the cluster
        Accessing the cluster by using Telnet
        Accessing the cluster by using RSH
      Using the ONTAP command-line interface
        Understanding the different shells for CLI commands
          Access of nodeshell commands and options in the clustershell
          Displaying available nodeshell commands
        Methods of navigating CLI command directories
        Rules for specifying values in the CLI
        Methods of viewing command history and reissuing commands
        Keyboard shortcuts for editing CLI commands
        Use of administrative privilege levels
        Setting the privilege level in the CLI
        Setting display preferences in the CLI
        Methods of using query operators
        Methods of using extended queries
        Methods of customizing show command output by using fields
        Understanding positional parameters
        Methods of accessing ONTAP man pages
      Managing CLI sessions
        Managing records of CLI sessions
          Recording a CLI session
          Commands for managing records of CLI sessions
        Managing the automatic timeout period of CLI sessions
          Commands for managing the automatic timeout period of CLI sessions