Skip to main content
A newer release of this product is available.

system node hardware nvram-encryption modify

Contributors
Suggest changes

Configure NVRAM device encryption

Availability: This command is available to cluster administrators at the admin privilege level.

Description

The system node hardware nvram-encryption modify command configures the encryption feature for the NVRAM or NVMEM data that is destaged to non-volatile flash storage.

Note This feature might be restricted in some countries due to local regulations concerning encrypted data.

Parameters

-node {<nodename>|local} - Node

Specifies the node containing the NVRAM or NVMEM subsystem.

[-is-enabled {true|false}] - Is Encryption Enabled

Specifies whether the NVRAM or NVMEM encryption is disabled or enabled.

Examples

The following commands enable or disable the NVRAM encryption:

cluster1::> system node hardware nvram-encryption modify  -node node1 -is-enabled false
      cluster1::> system node hardware nvram-encryption modify  -node node1 -is-enabled true