system service-processor image update-progress show

Display status for the latest Service Processor firmware update

Availability: This command is available to cluster administrators at the admin privilege level.

Description

The system service-processor image update-progress show command displays the progress information of firmware updates on the Service Processor (SP) or Baseboard Management Controller (BMC) of the specified nodes. The "in-progress" field displays "no" if no update is in progress. This command does not display the progress of an SP/BMC firmware update that is triggered from the SP CLI.

Parameters

{ [-fields <fieldname>, ...]
If you specify the -fields <fieldname>, ... parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify.
| [-instance ]}
If you specify the -instance parameter, the command displays detailed information about all fields.
[-node {<nodename>|local}] - Node
This parameter displays the status of SP or BMC firmware update for the specified node.
[-start-time <MM/DD/YYYY HH:MM:SS>] - Latest SP Firmware Update Start Timestamp
This parameter displays the status of the SP or BMC whose firmware update start time matches the specified value.
[-percent-done <integer>] - Latest SP Firmware Update Percentage Done
This parameter displays the status of the SP or BMC whose update completion percentage matches the specified value.
[-end-time <MM/DD/YYYY HH:MM:SS>] - Latest SP Firmware Update End Timestamp
This parameter displays the status of the SP or BMC whose firmware update end time matches the specified value.
[-in-progress {yes|no}] - Is Update in Progress
This parameter displays the update status of the SP or BMC that matches the specified in-progress status.

Examples

The following example starts a firmware update on the local node and then uses the command system service-processor image update-progress show to display progress of firmware updates on SPs or BMCs of all nodes in the system.
cluster1::> system service-processor image update -node local -baseline true

cluster1::>

cluster1::> system node service-processor image update-progress show
                 In                           Percent
Node             Progress Start Time          Done    End Time
---------------- -------- ------------------- ------- -------------------
node1            yes      8/28/2012 20:00:34  99      -
node2            no       -                   0       -
2 entries were displayed.

cluster1::>