security config status show

Display Security Configuration Status

Availability: This command is available to cluster administrators at the advanced privilege level.

Description

The security config status show command displays the required reboot status of the nodes in the cluster after security configuration settings have been modified using the security config modify command. Use this command to monitor the status of the required reboot process. When all nodes have rebooted, the cluster is ready to use the new security configuration settings.

Parameters

{ [-fields <fieldname>, ...]
If you specify the -fields <fieldname>, ... parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify.
| [-instance ]}
If you specify the -instance parameter, the command displays detailed information about all fields.
[-node {<nodename>|local}] - Node Name
Select the node whose reboot-status you want to display.
[-reboot-needed {true|false}] - Reboot Needed
reboot-needed status of the node that tells if the node requires a reboot for security configuration to take effect.

Examples

The following example displays the status of a configuration change in a four-node cluster.

cluster1::> security config status show
Nodes in Cluster      Reboot Needed
--------------------- -------------------
node1                 true
node2                 true
node3                 false
node4                 false
4 entries were displayed.

The following example shows the output of the command after the cluster reboot process is complete.

cluster1::> security config status show
Nodes in Cluster      Reboot Needed
--------------------- -------------------
node1                 false
node2                 false
node3                 false
node4                 false
4 entries were displayed.