metrocluster configuration-settings interface show

Display the network logical interfaces provisioned for MetroCluster

Availability: This command is available to cluster administrators at the admin privilege level.

Description

The metrocluster configuration-settings interface show command displays the network logical interfaces that were provisioned for MetroCluster.

Parameters

{ [-fields <fieldname>, ...]
If you specify the -fields <fieldname>,... parameter, the command displays only the fields that you specify.
| [-instance ]}
If this parameter is specified, the command displays detailed information about all entries.
[-dr-group-id <integer>] - DR Group ID
If this parameter is specified, the command displays information for the matching DR group.
[-cluster-uuid <UUID>] - Cluster UUID
If this parameter is specified, the command displays information for the matching cluster specified by uuid.
[-cluster <Cluster name>] - Cluster Name
If this parameter is specified, the command displays information for the matching cluster..
[-node-uuid <UUID>] - Node UUID
If this parameter is specified, the command displays information for the matching nodes uuid.
[-node <text>] - Node Name
If this parameter is specified, the command displays information for the matching nodes.
[-home-port {<netport>|<ifgrp>}] - Home Port
If this parameter is specified, all interfaces with home-port set to this value are displayed.
[-address <IP Address>] - Network Address
If this parameter is specified, the command displays information for the matching network address.
[-netmask <Contiguous IP Mask>] - Netmask
If this parameter is specified, all interfaces with netmask set to this value are displayed.
[-gateway <IP Address>] - Gateway
If this parameter is specified, all interfaces with gateway set to this value are displayed.
[-config-state <text>] - Configuration State
If this parameter is specified, all interfaces with this field set to the specified value are displayed.
[-config-error-info <text>] - Configuration Error Information
If this parameter is specified, all interfaces with this field set to the specified value are displayed.

Examples

The following example illustrates display of logical interfaces configured in a four-node MetroCluster setup:

clusA::> metrocluster configuration-settings interface show
DR                                                                    Config
Group Cluster Node    Network Address Netmask         Gateway         State
----- ------- ------- --------------- --------------- --------------- ---------
1     clusA A1
                 Home Port: e0f
                      10.140.113.214  255.255.192.0   -               completed
                 Home Port: e0g
                      10.140.113.215  255.255.192.0   -               completed
                       A2
                 Home Port: e0f
                      10.140.113.216  255.255.192.0   -               completed
                 Home Port: e0g
                      10.140.113.217  255.255.192.0   -               completed
      clusB B2
                 Home Port: e0f
                      10.140.113.249  255.255.192.0   -               completed
                 Home Port: e0g
                      10.140.113.25   255.255.192.0   -               completed
                       B1
                 Home Port: e0f
                      10.140.113.218  255.255.192.0   -               completed
                 Home Port: e0g
                      10.140.113.248  255.255.192.0   -               completed
8 entries were displayed.