system snmp authtrap

Enables or disables SNMP authentication traps

Availability: This command is available to cluster administrators at the admin privilege level.

Description

Use this command to either enable or disable the standard SNMP authentication failure traps.

Parameters

[-authtrap <integer>] - Enables SNMP Authentication Trap
Enter the value of 1 to enable SNMP authentication failure traps. By default, SNMP authentication trap is disabled and the value is 0.

Examples

The following example demonstrates how to set the SNMP authtrap.
	
	cluster1::> system snmp authtrap -authtrap 1

	cluster1::> system snmp show
	contact:
	        private
	location:
	        NB
	authtrap:
	        1
	init:
	        0
	traphosts:
	        -
	community:
       	       -   -