Skip to main content

Commands for managing the web protocol engine

Contributors netapp-barbe

You use the system services web commands to manage the web protocol engine. You use the system services firewall policy create and network interface modify commands to allow web access requests to go through the firewall.

If you want to…​ Use this command…​

Configure the web protocol engine at the cluster level:

  • Enable or disable the web protocol engine for the cluster

  • Enable or disable SSLv3 for the cluster

  • Enable or disable FIPS 140-2 compliance for secure web services (HTTPS)

system services web modify

Display the configuration of the web protocol engine at the cluster level, determine whether the web protocols are functional throughout the cluster, and display whether FIPS 140-2 compliance is enabled and online

system services web show

Display the configuration of the web protocol engine at the node level and the activity of web service handling for the nodes in the cluster

system services web node show

Create a firewall policy or add HTTP or HTTPS protocol service to an existing firewall policy to allow web access requests to go through firewall

system services firewall policy create

Setting the -service parameter to http or https enables web access requests to go through firewall.

Associate a firewall policy with a LIF

network interface modify

You can use the -firewall-policy parameter to modify the firewall policy of a LIF.