Racking the new equipment

You must rack the equipment for the new nodes.

Procedure

Use the MetroCluster Installation and Configuration guide and rack the new storage systems, disk shelves, and FC-to-SAS bridges.

Fabric-attached MetroCluster installation and configuration

Parent topic: Expanding a four-node MetroCluster FC configuration to an eight-node configuration
Previous topic: Determining the new cabling layout
Next topic: Verifying the health of the MetroCluster configuration
Copyright © 1994-2020, NetApp, Inc. All rights reserved.
Part number: 215-15120_2020-11_en-us
November 2020
Updated for ONTAP 9.8