Connecting and booting up node_A_1-IP and node_B_1-IP

After connecting the MetroCluster IP controllers and IP switches, you transition and boot up node_A_1-IP and node_B_1-IP..

  1. Transitioning node_A_1-IP
    You must boot the first new MetroCluster IP node using the correct transition command and configure the networking on the node.
  2. Transitioning node_B_1-IP
    Repeat the previous tasks in this section to transition node_B_1-IP.
Parent topic: Connecting the MetroCluster IP controller modules
Previous topic: Setting up the new controllers
Next topic: Bringing up node_A_2-IP and node_B_2-IP
Copyright © 1994-2020, NetApp, Inc. All rights reserved.
Part number: 215-15120_2020-12_en-us
December 2020
Updated for ONTAP 9.8