Configuring a Service Processor

You can configure a Service Processor to monitor and manage various system parameters of your storage systems. Configuring a Service Processor involves assigning IP addresses to all the Service Processors and modifying the settings. If required, you can assign IP addresses to the selected Service Processors.

Steps

  1. Assigning IP addresses to Service Processors
    You can use System Manager to assign IP addresses to all of your Service Processors at the same time and to use these Service Processors to monitor and manage various system parameters of your storage systems.
  2. Editing Service Processor settings
    You can modify Service Processor attributes, such as the IP address, the network mask or the prefix length, and the gateway address, by using System Manager. You can also allocate IP addresses to Service Processors that do not have any IP addresses assigned.
Copyright © 1994-2019, NetApp, Inc. All rights reserved.
Part number: 215-13786_2019-08_en-us
August 2019
Updated for ONTAP 9.6