Creating a replication relationship

The relationship between the source volume in primary storage and the destination volume in secondary storage is called a data protection relationship. You can use the snapmirror create command to create SnapMirror DR, SnapVault, or unified replication data protection relationships.

Before you begin

About this task

Until ONTAP 9.3, SnapMirror invoked in DP mode and SnapMirror invoked in XDP mode used different replication engines, with different approaches to version-dependence:

With improvements in performance, the significant benefits of version-flexible SnapMirror outweigh the slight advantage in replication throughput obtained with version-dependent mode. For this reason, starting with ONTAP 9.3, XDP mode has been made the new default, and any invocations of DP mode on the command line or in new or existing scripts are automatically converted to XDP mode.

Existing relationships are not affected. If a relationship is already of type DP, it will continue to be of type DP. The table below shows the behavior you can expect.

If you specify...

The type is...

The default policy (if you do not specify a policy) is...

DP XDP MirrorAllSnapshots (SnapMirror DR)
Nothing XDP MirrorAllSnapshots (SnapMirror DR)
XDP XDP XDPDefault (SnapVault)

See also the examples in the procedure below.

The only exceptions to conversion are as follows:

In ONTAP 9.3 and earlier, a destination volume can contain up to 251 Snapshot copies. In ONTAP 9.4 and later, a destination volume can contain up to 1019 Snapshot copies.

Starting with ONTAP 9.5, SnapMirror Synchronous relationships are supported.

Procedure

From the destination cluster, create a replication relationship:snapmirror create -source-path SVM:volume|cluster://SVM/volume, ... -destination-path SVM:volume|cluster://SVM/volume, ... -type DP|XDP -schedule schedule -policy policy
For complete command syntax, see the man page.
Note: The schedule parameter is not applicable when creating SnapMirror Synchronous relationships.
The following example creates a SnapMirror DR relationship using the default MirrorLatest policy:
cluster_dst::> snapmirror create -source-path svm1:volA -destination-path svm_backup:volA_dst -type XDP -schedule my_daily -policy MirrorLatest
The following example creates a SnapVault relationship using the default XDPDefault policy:
cluster_dst::> snapmirror create -source-path svm1:volA -destination-path svm_backup:volA_dst -type XDP -schedule my_daily -policy XDPDefault
The following example creates a unified replication relationship using the default MirrorAndVault policy:
cluster_dst:> snapmirror create -source-path svm1:volA -destination-path svm_backup:volA_dst -type XDP -schedule my_daily -policy MirrorAndVault
The following example creates a unified replication relationship using the custom my_unified policy:
cluster_dst::> snapmirror create -source-path svm1:volA -destination-path svm_backup:volA_dst -type XDP -schedule my_daily -policy my_unified
The following example creates a SnapMirror Synchronous relationship using the default Sync policy:
cluster_dst::> snapmirror create -source-path svm1:volA -destination-path svm_backup:volA_dst -type XDP -policy Sync
The following example creates a SnapMirror Synchronous relationship using the default StrictSync policy:
cluster_dst::> snapmirror create -source-path svm1:volA -destination-path svm_backup:volA_dst -type XDP -policy StrictSync
The following example creates a SnapMirror DR relationship. With the DP type automatically converted to XDP and with no policy specified, the policy defaults to the MirrorAllSnapshots policy:
cluster_dst::> snapmirror create -source-path svm1:volA -destination-path svm_backup:volA_dst -type DP -schedule my_daily
The following example creates a SnapMirror DR relationship. With no type or policy specified, the policy defaults to the MirrorAllSnapshots policy:
cluster_dst::> snapmirror create -source-path svm1:volA -destination-path svm_backup:volA_dst -schedule my_daily
The following example creates a SnapMirror DR relationship. With no policy specified, the policy defaults to the XDPDefault policy:
cluster_dst::> snapmirror create -source-path svm1:volA -destination-path svm_backup:volA_dst -type XDP -schedule my_daily
The following example creates a SnapMirror Synchronous relationship with the predefined policy SnapCenterSync:
cluster_dst::> snapmirror create -source-path svm1:volA -destination-path svm_backup:volA_dst -type XDP -policy SnapCenterSync
Note: The predefined policy SnapCenterSync is of type Sync. This policy replicates any Snapshot copy that is created with the snapmirror-label of "app_consistent".

After you finish

Use the snapmirror show command to verify that the SnapMirror relationship was created. For complete command syntax, see the man page.