You must enable SnapMirror on the Element source volume before you can create a replication relationship. You can perform this task in the Element software web UI only.
Before you begin
- You must have enabled SnapMirror on the Element cluster.
- The volume block size must be 512 bytes.
- The volume must not be participating in Element remote replication.
- The volume access type must not be "Replication Target".
About this task
The procedure below assumes the volume already exists. You can also enable SnapMirror when you create or clone a volume.
Steps
- Click .
- Click the
button for the volume.
- In the drop-down menu, select Edit.
- In the Edit Volume dialog, select Enable SnapMirror.
- Click Save Changes.