Moving caching modules

You must move the caching modules from the impaired controller modules to the replacement controller module when replacing a controller module.

About this task

You can use the following animation or the written steps to move caching modules to the new controller module.

Steps

  1. If you are not already grounded, properly ground yourself.
  2. Move the caching modules from the inmpaired controller moduel to the replacement controller module:
    1. Press the blue release tab at the end of the caching module, rotate the module up, and then remove the module from the socket.
    2. Move the caching module to the same socket on the replacement controller odule .
    3. Align the edges of the caching module with the socket and dently insert the module as far into the socket as it will go.
    4. Rotate the caching module downward toward the motherboard.
    5. Placing your finger at the end of the caching module by the blue button, firmly push down on the caching module end, and then lift the locking button to lock the caching module in place.