Skip to main content
Install and maintain

Overview of boot media replacement - AFF A250

Contributors netapp-martyh thrisun dougthomp netapp-jsnyder
PDFs

The boot media stores a primary and secondary set of system (boot image) files that the system uses when it boots.

Before you begin

  • You must have a USB flash drive, formatted to MBR/FAT32, with the appropriate amount of storage to hold the image_xxx.tgz file.

  • You also must copy the image_xxx.tgz file to the USB flash drive for later use in this procedure.

About this task

  • The nondisruptive and disruptive methods for replacing a boot media both require you to restore the var file system:

    • For nondisruptive replacement, the HA pair must be connected to a network to restore the var file system.

    • For disruptive replacement, you do not need a network connection to restore the var file system, but the process requires two reboots.

  • You must replace the failed component with a replacement FRU component you received from your provider.

  • It is important that you apply the commands in these steps on the correct controller:

    • The impaired node is the controller on which you are performing maintenance.

    • The healthy node is the HA partner of the impaired controller.