Document update record

When updates are made to this document, they are logged for your reference.

Feature release date	Feature updates
October 2020	Updated the Hot-removing a drive shelf procedure to include the new command for ONTAP 9.8 and later, when reconfiguring non-dedicated RoCE capable ports for networking use (instead of storage use). Updated the Replacing the boot media procedure and video to show that the screw holding the boot media in place needs to be completely removed, not loosened, before removing the boot media.
Feature release date	Feature updates
February 2020	Added the boot media FRU replacement video to the Replacing the boot media procedure.
Feature release date	Feature updates
November 2019	Added the Replacing the boot media procedure. The boot media is a FRU on systems running ONTAP 9.7 or later, or if shelves are running NVMe shelf module (NSM) firmware version 1.10 or later. Updated the Hot-removing a drive shelf procedure. If after removing a shelf, you decide to reconfigure the non-dedicated ports from storage use to networking use, and your HA pair is running ONTAP 9.7 or later, you do not need to reboot the controllers.
Feature release date	Feature updates
August 2019	Updated all FRU procedures to include videos. You can use the videos or the written instructions to replace a FRU, with the exception of the Hot-swapping a drive procedure. However, before replacing a FRU, always read the Before you begin and About this task sections of the FRU procedure.
Feature release date	Feature updates
July 2019	Initial release of the Service Guide for NS224