Editing a virtual network

You can change VLAN attributes, such as VLAN name, netmask, and size of the IP address blocks.

About this task

The VLAN Tag and SVIP cannot be modified for a VLAN. The gateway attribute can only be modified for VRF VLANs. If any iSCSI, remote replication, or other network sessions exist, the modification might fail.

Steps

  1. Select NetApp Element Management > Cluster.
    Note: If two or more clusters are added, ensure that the cluster you intend to use for the task is selected in the navigation bar.
  2. Click the Network sub-tab
  3. Select the check box for the VLAN you want to edit.
  4. Click Actions.
  5. In the resulting menu, click Edit.
  6. In the resulting menu, enter the new attributes for the VLAN.
  7. Click Create Block to add a non-continuous block of IP addresses for the virtual network.
  8. Click OK.
Parent topic: VLAN management
Copyright © 1994-2019, NetApp, Inc. All rights reserved.
Part number: 215-14588_2019-11_en-us
November 2019