You can view a list of the nodes in the cluster on the Nodes page of the Cluster tab from the NetApp Element Management extension point. You must select Active view to see the list of active nodes. You can change the view by selecting Pending, PendingActive, and All options using the drop-down filter.
- Node ID
- System-generated ID for the node.
- Node Name
- The system-generated or administrator-assigned node name.
Note: If your node is a witness node in a two-node cluster, the ESXi host IP displays in parentheses if the ESXi host is managed by the same vCenter that is running the plug-in.
- Node State
- The status of the node.
Possible values:
- Active: The node is an active member of a cluster and cannot be added to another cluster.
- Pending: The node is pending for a specific named cluster and can be added.
- PendingActive: The node is currently being returned to the factory software image, and is not yet an active member of a cluster. When complete, it will transition to the Active state.
- Available 4k IOPS
- Displays the IOPS configured for the node.
- Node Role
- Identifies what role the node has in the cluster.
Possible values:
- Cluster Master: The node that performs cluster-wide administrative tasks and contains the MVIP and SVIP.
- Ensemble Node: A node that participates in the cluster. There are either 3 or 5 ensemble nodes depending on cluster size.
- Fibre Channel: A Fibre Channel node in the cluster.
- Node Type
- Displays the model type of the node.
Note: A virtual node type displays as SFVIRT.
- Active Drives
- Number of active drives in the node.
- Management IP
- Management IP (MIP) address assigned to node for 1GbE or 10GbE network admin tasks.
- Storage IP
- Storage IP (SIP) address assigned to the node used for iSCSI network discovery and all data network traffic.
- Management VLAN ID
- The virtual ID for the management local area network.
- Storage VLAN
- The virtual ID for the storage local area network.
- Version
- Version of NetApp Element software running on each node.