Performing the upgrade to NAS Bridge version 2.0.3

After removing file systems and cache devices, you can perform the upgrade to NAS Bridge 2.0.3.

Before you begin

Steps

  1. From your local workstation and using a secure copy protocol (such as scp), copy the file you downloaded to the NAS Bridge virtual machine.scp NetApp_StorageGRID_Webscale_NAS_Bridge_version-date.upgrade pb@ip-of-nas-bridge:~
  2. When prompted, type the current password for the CLI administrator account (pb).
  3. Open the console for the NAS Bridge virtual machine.
  4. Log in using the CLI administrator account (pb).
  5. When prompted, type the current password for the account.
  6. Using a secure copy protocol (such as scp), move the file you downloaded to /var/local/ on the NAS Bridge node, and rename the file as pb-upgrade.run.sudo mv ~/NetApp_StorageGRID_Webscale_NAS_Bridge_version-date.upgrade /var/local/pb-upgrade.run
  7. From a supported browser, sign in to the NAS Bridge user interface.
  8. Select Maintenance at the top of the web page.
  9. Select Tasks.
  10. Select Upgrade.
  11. Select Yes, upgrade to start the upgrade process.

    This image is described by the surrounding text.
  12. Wait for the software upgrade to complete.
  13. Click the Refresh button for your browser.
    You must refresh your browser to display the new version.
  14. Confirm that the upgrade succeeded.
    1. From the top right of the page, select Help > System Info.
    2. Confirm that version 2.0.3 is displayed.
      Contact technical support if the upgrade process does not complete within 5 to 10 minutes or the correct version is not shown.