Troubleshooting SAVP Total Usable Space (Percent) alarm

If the SAVP Total Usable Space alarm appears, you can investigate the cause.

1. Select Alarms.
2. Notice the SAVP alarm.
   
   
   
3. Click the attribute name to display more information as shown in the following figure.
   
   
   
4. Look up the troubleshooting information for the SAVP alarm.
   The recommended actions are:

   • Add storage
   • Migrate data to archive media
5. Determine when this LDR service’s storage is likely to reach capacity:
   1. Select Grid.
   2. Select the LDR service’s Storage component that triggered the alarm. Click the Service link in the System Status table.
   3. Select LDR > Storage > Alarms > Main.

      
      
      

   4. Notice the alarm for Total Usable Space (Percent). Click to chart usable space available over the last hour. Total space available has been steadily decreasing.
      
      
   5. Review the trend over the last day to estimate how fast storage capacity is decreasing. Total available space for this LDR service decreased about 15% in the last day.
      
      
   If there is no available storage for the StorageGRID Webscale system’s other Storage Nodes, add storage to the system by adding Storage Nodes.

   For more information about Storage Nodes, see the Administrator Guide.