Rebooting the E5700SG controller while the StorageGRID Webscale Appliance Installer is running

You might need to reboot the E5700SG controller while the StorageGRID Webscale Appliance Installer is running. For example, you might need to reboot the controller if the installation fails.

About this task

This procedure only applies when the E5700SG controller is running the StorageGRID Webscale Appliance Installer. Once the installation is completed, this step no longer works because the StorageGRID Webscale Appliance Installer is no longer available.

Steps

  1. From the menu bar of the StorageGRID Webscale Appliance Installer, click Advance > Reboot Controller.
    The Reboot Controller page appears.
  2. Click Reboot Controller.

    Screenshot showing Reboot Controller option for the StorageGRID Webscale Appliance Installer
    A confirm dialog box appears.
  3. Confirm you want to reboot the controller.
    The E5700SG controller is rebooted.
Parent topic: Troubleshooting the hardware installation
Copyright © 1994-2019, NetApp, Inc. All rights reserved.
Part number: 215-12407_2019-08_en-us
August 2019