Installation overview

You can install one or more StorageGRID Webscale appliances when you first deploy StorageGRID Webscale, or you can add appliance Storage Nodes later as part of an expansion. You might also need to install an appliance Storage Node as part of a recovery operation.

Installing a StorageGRID Webscale appliance includes two primary phases.

1. Installing and configuring appliance hardware

This guide describes the first phase of installing a StorageGRID Webscale appliance, which includes these steps:
  1. Preparing for installation:
    • Preparing the installation site
    • Unpacking the boxes and checking the contents
    • Obtaining additional equipment and tools
    • Gathering IP addresses and network information
  2. Installing the hardware:
    • Registering the hardware
    • Installing the appliance into a cabinet or rack
    • Installing the drives (SG5760 only)
    • Cabling the appliance
    • Connecting the power cords and applying power
    • Viewing boot-up status codes
  3. Configuring the hardware:
    • Accessing SANtricity System Manager, setting a static IP address for management port 1 on the E2800 controller, and configuring SANtricity System Manager settings
    • Accessing StorageGRID Webscale Appliance Installer and configuring the link and network IP settings required to connect to StorageGRID Webscale networks

2. Deploying an appliance Storage Node

After the appliance hardware has been installed and configured using the instructions in this guide, you can deploy the appliance as a Storage Node in a StorageGRID Webscale grid.
Task Instructions
Deploying an appliance Storage Node in a new StorageGRID Webscale grid StorageGRID Webscale Installation Guide for your platform
Adding an appliance Storage Node to an existing StorageGRID Webscale grid StorageGRID Webscale Expansion Guide
Deploying an appliance Storage Node as part of a Storage Node recovery operation StorageGRID Webscale Recovery and Maintenance Guide