You might need to remap the internal ports on the appliance Storage Node to different external ports. For example, you might need to remap ports because of a firewall issue.
Before you begin
You have previously accessed the
StorageGRID Webscale Appliance Installer.
Steps
- From the menu bar of the StorageGRID Webscale Appliance Installer, click .
The Remap Port page appears.
- From the Network drop-down box, select the network for the port you want to remap: Grid, Admin, or Client.
- From the Protocol drop-down box, select the IP protocol: TCP or UDP.
- From the Remap Direction drop-down box, select which traffic direction you want to remap for this port: Inbound, Outbound, or Bi-directional.
- For Original Port, enter the number of the port you want to remap.
- For Mapped-To Port, enter the number of the port you want to use instead.
- Click Add Rule.
The new port mapping is added to the table, and the remapping takes effect immediately.

- To remove a port mapping, select the radio button for the rule you want to remove, and click Remove Selected Rule.