You can use SANtricity System Manager to monitor the status of the storage controllers, storage disks, and other hardware components in the E2860 controller shelf.
Steps
Accessing SANtricity System Manager
You can monitor and manage the hardware in the E2860 controller shelf by browsing to SANtricity System Manager, which is included on the E2800 controllers.
Setting the IP addresses for the E2800 controllers
Management port 1 on each E2800 controller connects the appliance to the management network for SANtricity System Manager. You must set a static IP address for each E2800 controller to ensure that you do not lose your management connection to the hardware and the controller firmware in the E2860 controller shelf.
Setting up SANtricity System Manager
After accessing SANtricity System Manager, you can use it to configure hardware settings. Typically, you configure these settings before deploying the appliance as a Storage Node in a StorageGRID Webscale grid.
Reviewing the hardware status in SANtricity System Manager
You can use SANtricity System Manager to monitor and manage the individual hardware components in the E2860 controller shelf and to review hardware diagnostic and environmental information, such as component temperatures, as well as issues related to the drives.