Installation overview

You can install one or more StorageGRID appliances when you first deploy StorageGRID, or you can add appliance Storage Nodes later as part of an expansion. You might also need to install an appliance Storage Node as part of a recovery operation.

Installing a StorageGRID appliance includes two primary phases.

1. Installing and configuring appliance hardware

The first phase of installing a StorageGRID appliance includes these steps:
  1. Preparing for installation:
    • Preparing the installation site
    • Unpacking the boxes and checking the contents
    • Obtaining additional equipment and tools
    • Gathering IP addresses and network information
  2. Installing the hardware:
    • Registering the hardware
    • Installing the appliance into a cabinet or rack
    • Installing the drives (SG5760 only)
    • Cabling the appliance
    • Connecting the power cords and applying power
    • Viewing boot-up status codes
  3. Configuring the hardware:
    • Accessing SANtricity System Manager, setting a static IP address for management port 1 on the E2800 controller, and configuring SANtricity System Manager settings
    • Accessing StorageGRID Appliance Installer and configuring the link and network IP settings required to connect to StorageGRID networks

2. Deploying an appliance Storage Node

After the appliance hardware has been installed and configured using these instructions, you can deploy the appliance as a Storage Node in a StorageGRID grid.
Task Instructions
Deploying an appliance Storage Node in a new StorageGRID grid StorageGRID installation instructions for your platform
Adding an appliance Storage Node to an existing StorageGRID grid Instructions for expanding a StorageGRID grid
Deploying an appliance Storage Node as part of a Storage Node recovery operation Instructions for recovery and maintenance