Adding a cache device to NAS Bridge

Every file system you create must be associated with a cache device. You should add cache devices to the NAS Bridge based on file systems that you plan to create.

Before you begin

You must have added a hard drive to the NAS Bridge virtual machine.

Steps

  1. Sign in to the NAS Bridge web interface.
  2. Click Configuration at the top of the web page.
  3. Click Cache Devices.
  4. Click Add.
  5. Type the name of the new cache device.
  6. Select the drive for this cache device from the Disk drop-down list.

    The drive name is shown as /dev/name, where name is the Linux-assigned name of the drive that was added when you performed the steps to add a drive to the virtual machine.

    Note: Any drive smaller than 100 GB will not appear in the Disk drop-down list.
  7. Click Save.
    When the operation completes, the new cache device is displayed with a status of READY.


    This image is described by the surrounding text.

    The cache device is now available for use when adding file systems. Cache device usage is displayed on the dashboard.

  8. When you are finished, download a NAS Bridge recovery package.
    Attention: You should download a NAS Bridge recovery package whenever you make configuration changes or upgrade to a new version of NAS Bridge. Recovery packages from previous versions will not be valid.
    1. Go to Maintenance > Recovery Procedure .
    2. Click Generate Package.
    3. Select the package from the table, and click Download to download the package to your local workstation.
    4. Save the package to a safe location.