Configuring Storage proxy settings

If you are using platform services or Cloud Storage Pools, you can configure a non-transparent proxy between Storage Nodes and the external S3 endpoints. For example, you might need a non-transparent proxy to allow platform services messages to be sent to external endpoints, such as an endpoint on the internet.

Before you begin

About this task

You can configure the settings for a single Storage proxy.


  1. Select Configuration > Proxy Settings.
    The Storage Proxy Settings page appears. By default, Storage is selected in the sidebar menu.
    Proxy Settings Menu - Storage
  2. Select the Enable Storage Proxy check box.
    The fields for configuring a Storage proxy appear.
    screenshot of Storage Proxy Settings dialog box
  3. Select the protocol for the non-transparent Storage proxy.
  4. Enter the hostname or IP address of the proxy server.
  5. Optionally, enter the port used to connect to the proxy server.
    You can leave this field blank if you use the default port for the protocol: 80 for HTTP or 1080 for SOCKS5.
  6. Click Save.
    After the Storage proxy is saved, new endpoints for platform services or Cloud Storage Pools can be configured and tested.
    Note: Proxy changes can take up to 10 minutes to take effect.
  7. If you need to disable the proxy, deselect the Enable Storage Proxy check box, and click Save.