Configuring Archive Node retrieve settings

You can configure the retrieve settings for an Archive Node to set the state to Online or Offline, or reset the failure counts being tracked for the associated alarms.

1. Select Support. Then, in the Tools section of the menu, select Grid Topology.
2. Select Archive Node > ARC > Retrieve.
3. Click Configuration > Main .
   
   
   
4. Modify the following settings, as necessary:
   • Retrieve State: Set the component state to either:
     • Online: The grid node is available to retrieve object data from the archival media device.
     • Offline: The grid node is not available to retrieve object data.
   • Reset Request Failures Count: Select the check box to reset the counter for request failures. This can be used to clear the ARRF (Request Failures) alarm.
   • Reset Verification Failure Count: Select the check box to reset the counter for verification failures on retrieved object data. This can be used to clear the ARRV (Verification Failures) alarm.
5. Click Apply Changes.