The StorageGRID SG100 services appliance and the SG1000 services appliance can operate as Gateway Nodes or as Admin Nodes to provide high availability load balancing services in a StorageGRID system.
The remaining drive slots are blank.
This figure shows the connectors on the back of the SG100.
Port | Type | Use | |
---|---|---|---|
1 | Network ports 1-4 | 10/25-GbE, based on cable or SFP transceiver type (SFP28 and SFP+ modules are supported), switch speed, and configured link speed | Connect to the Grid Network and the Client Network for StorageGRID. |
2 | BMC management port | 1-GbE (RJ-45) | Connect to the appliance baseboard management controller. |
3 | Diagnostic and support ports |
|
Reserved for technical support use. |
4 | Admin Network port 1 | 1-GbE (RJ-45) | Connect the appliance to the Admin Network for StorageGRID. |
5 | Admin Network port 2 | 1-GbE (RJ-45) | Options:
|
This figure shows the connectors on the back of the SG1000.
Port | Type | Use | |
---|---|---|---|
1 | Network ports 1-4 | 10/25/40/100-GbE, based on cable or transceiver type, switch speed, and configured link speed. QSFP28 and QSFP+ (40/100GbE) are supported natively and SFP28/SFP+ transceivers can be used with a QSA (sold separately) to use 10/25GbE speeds. | Connect to the Grid Network and the Client Network for StorageGRID. |
2 | BMC management port | 1-GbE (RJ-45) | Connect to the appliance baseboard management controller. |
3 | Diagnostic and support ports |
|
Reserved for technical support use. |
4 | Admin Network port 1 | 1-GbE (RJ-45) | Connect the appliance to the Admin Network for StorageGRID. |
5 | Admin Network port 2 | 1-GbE (RJ-45) | Options:
|