Deploying a services appliance as a primary Admin Node

When you deploy a services appliance as a primary Admin Node, you use the StorageGRID Appliance Installer included on the appliance to install the StorageGRID software, or you upload the software version you want to install. You must install and configure the primary Admin Node before you install any other appliance node types. A primary Admin Node can connect to the Grid Network, the Admin Network, and the Client Network.

Before you begin

About this task

To install StorageGRID on an appliance primary Admin Node:
  • You use the StorageGRID Appliance Installer to install the StorageGRID software. If you want to install a different version of the software, you first upload it using the StorageGRID Appliance Installer.
  • You wait as the software is installed.
  • When the software has been installed, the appliance is rebooted automatically.

Procedure

  1. Open a browser, and enter the IP address for the appliance.
    https://services_appliance_IP:8443

    The StorageGRID Appliance Installer Home page appears.

  2. In the This Node section, select Primary Admin.
  3. In the Node name field, enter the name you want to use for this appliance node, and click Save.
    The node name is assigned to this appliance node in the StorageGRID system. It is shown on the Grid Nodes page in the Grid Manager.
  4. Optionally, to install a different version of the StorageGRID software, follow these steps:
    1. Download the installation archive from the NetApp Downloads page for StorageGRID.
    2. Extract the archive.
    3. From the StorageGRID Appliance Installer, select Advanced > Upload StorageGRID Software.
    4. Click Remove to remove the current software package.

      Appliance Installer - Remove Current Software
    5. Click Browse for the software package you downloaded and extracted, and then click Browse for the checksum file.

      Appliance Installer - Upload SG Software
    6. Select Home to return to the Home page.
  5. Confirm that the current state is Ready to start installation of primary Admin Node name with software version x.y and that the Start Installation button is enabled.
  6. From the StorageGRID Appliance Installer home page, click Start Installation.

    Appliance Primary Admin Node Installation

    The Current state changes to Installation is in progress, and the Monitor Installation page is displayed.

    Note: If you need to access the Monitor Installation page manually, click Monitor Installation from the menu bar.