Preparing to install a StorageGRID appliance entails preparing the site and obtaining all required hardware, cables, and tools. You should also gather IP addresses and network information.
Preparing the site
Before installing the appliance, you must make sure that the site and the cabinet or rack you plan to use meet the specifications for a StorageGRID appliance.
Unpacking the boxes
Before installing the StorageGRID appliance, unpack all boxes and compare the contents to the items on the packing slip.
Preparing networks
When preparing to install an appliance-only StorageGRID system or one that contains a mixture of appliance nodes and software-based nodes, you must verify that the networking infrastructure and configuration are in place.
Gathering installation information
As you install and configure the StorageGRID appliance, you must make decisions and gather information about Ethernet switch ports, IP addresses, and port and network bond modes. Record the required information for each network you connect to the appliance. These values are required to install and configure the hardware.