Skip to main content

Updating link costs

Contributors

You can update the link costs between data center sites to reflect latency between sites.

What you'll need
  • You must be signed in to the Grid Manager using a supported browser.

  • You must have the Grid Topology Page Configuration permission.

Steps
  1. Select Configuration > Network Settings > Link Cost.

    Link Cost
  2. Select a site under Link Source and enter a cost value between 0 and 100 under Link Destination.

    You cannot change the link cost if the source is the same as the destination.

    To cancel changes, click undo iconRevert.

  3. Click Apply Changes.