Skip to main content
NetApp Console local deployment

Maintain your vCenter or ESXi host for NetApp Console local deployment

Contributors netapp-tonias netapp-ml94669
PDFs

In NetApp Console local deployment, you can make changes to your existing VCenter or ESXi host after you deploy the Console local deployment. For example, you can increase the CPU or RAM of the VM instance that hosts the Console local deployment.

Perform these maintenance tasks using the VM web console:

  • Increase disk size

  • Restart the Console local deployment

  • Update static routes

  • Update search domains

Limitations

You can only view (not update) information about the IP address, DNS, and gateways through the maintenance console.

Access the VM maintenance console

You can access the maintenance console from the VSphere client.

Steps

  1. Open the VSphere client and log in to your VCenter.

  2. Select the VM instance that hosts the Console local deployment.

  3. Select Launch Web Console.

  4. Log in to the VM instance using the user name and password that you specified when you created the VM instance. The username is maint and the password is the one that you specified when you created the VM instance.

Change the maint user password

You can change the password for the maint user.

Steps

  1. Open the VSphere client and log in to your VCenter.

  2. Select the VM instance that hosts the Console local deployment.

  3. Select Launch Web Console.

  4. Log in to the VM instance using the user name and password that you specified when you created the VM instance. The username is maint and the password is the one that you specified when you created the VM instance.

  5. Enter 1 to view the System Configuration menu.

  6. Enter 1 to change the maintenance user password and follow the on-screen prompts.

Increase the CPU or RAM of the VM instance

You can increase the CPU or RAM of the VM instance that hosts Console local deployment.

Edit the VM instance settings in your VCenter or ESXi host, then use the maintenance Console to apply the changes.

Steps in the VSphere client

  1. Open the VSphere client and log in to your VCenter.

  2. Select the VM instance that hosts the Console local deployment.

  3. Right-click the VM instance and select Edit Settings.

  4. Increase the hard drive space used for /opt or the /var partition.

    1. Select Hard Disk 2 to increase the hard drive space used for /opt.

    2. Select Hard Disk 3 to increase the hard drive space used for /var.

  5. Save your changes.

Steps in the maintenance console

  1. Open the VSphere client and log in to your VCenter.

  2. Select the VM instance that hosts Console local deployment.

  3. Select Launch Web Console.

  4. Log in to the VM instance using the user name and password that you specified when you created the VM instance. The username is maint and the password is the one that you specified when you created the VM instance.

  5. Enter 1 to view the `System Configuration menu.

  6. Enter 2 and follow the on-screen prompts. The console scans for new settings and increases the size of the partitions.

View network settings for the Console local deployment VM

View the network settings for the Console local deployment VM in the VSphere client to confirm or troubleshoot network issues. You can only view (not update) the following network settings: IP address and DNS details.

Steps

  1. Open the VSphere client and log in to your VCenter.

  2. Select the VM instance that hosts the Console local deployment.

  3. Select Launch Web Console.

  4. Log in to the VM instance using the user name and password that you specified when you created the VM instance. The username is maint and the password is the one that you specified when you created the VM instance.

  5. Enter 2 to view the Network Configuration menu.

  6. Enter a number between 1 and 6 to view the corresponding network settings.

Update the static routes for the Console local deployment VM

Add, update, or remove static routes for the Console local deployment VM as needed.

Steps

  1. Open the VSphere client and log in to your VCenter.

  2. Select the VM instance that hosts the Console local deployment.

  3. Select Launch Web Console.

  4. Log in to the VM instance using the user name and password that you specified when you created the VM instance. The username is maint and the password is the one that you specified when you created the VM instance.

  5. Enter 2 to view the Network Configuration menu.

  6. Enter 7 to update static routes and follow the on-screen prompts.

  7. Press Enter.

  8. Optionally, make additional changes.

  9. Enter 9 to commit your changes.

Update domain search settings for the Console local deployment VM

You can update the search domain settings for the Console local deployment VM.

Steps

  1. Open the VSphere client and log in to your VCenter.

  2. Select the VM instance that hosts the Console local deployment.

  3. Select Launch Web Console.

  4. Log in to the VM instance using the user name and password that you specified when you created the VM instance. The username is maint and the password is the one that you specified when you created the VM instance.

  5. Enter 2` to view the Network Configuration menu.

  6. Enter 8 to update the domain search settings and follow the on-screen prompts.

  7. Press Enter.

  8. Optionally, make additional changes.

  9. Enter 9 to commit your changes.

Access the Console local deployment diagnostic tools

Access diagnostic tools to troubleshoot issues with the Console local deployment. NetApp Support may ask you to do this when troubleshooting issues.

Steps

  1. Open the VSphere client and log in to your VCenter.

  2. Select the VM instance that hosts the Console local deployment.

  3. Select Launch Web Console.

  4. Log in to the VM instance using the user name and password that you specified when you created the VM instance. The username is maint and the password is the one that you specified when you created the VM instance.

  5. Enter 3 to view the Support and Diagnostics menu.

  6. Enter 1 to access the diagnostic tools and follow the on-screen prompts.

Access the Console local deployment diagnostic tools remotely

You can access diagnostic tools remotely with a tool such as Putty. Enable SSH access to the Console local deployment VM by assigning a one-time password.

SSH access enables advanced terminal features like copy and paste.

Steps

  1. Open the VSphere client and log in to your VCenter.

  2. Select the VM instance that hosts the Console local deployment.

  3. Select Launch Web Console.

  4. Log in to the VM instance using the user name and password that you specified when you created the VM instance. The username is maint and the password is the one that you specified when you created the VM instance.

  5. Enter 3 to view the Support and Diagnostics menu.

  6. Enter 2 to access the diagnostic tools and follow the on-screen prompts to configure a one-time password that expires in 24 hours.

  7. Use an SSH tool such as Putty to connect to the Console local deployment VM using the user name diag and the one-time password that you configured.